 |
เครื่องวัดความชื้นสำหรับงานปูนและไม้
–
Model 9XDC for Plaster and Wood
Description:
Model
9XDC is a pocket-sized, low cost, rugged meter designed to provide
fast and accurate LED moisture readout. It tests the moisture content
of lumber from 12% to 28% and of dry wall/wall plaster from 3% to 7%.
 Download
PDFs:
Printable
data sheet / Printable
product manual
|
 |
 |
เครื่องวัดความชื้นเอนกประสงค์
–
Model A8 All Purpose Moisture Meter
Description:
Model
A8 Moisture Meter uses the RF power loss method to measure the
moisture content of flat, curved,
smooth, or rough surfaces such as cones or beams of yarn, rolls, or
stacks of cloth, rolls or stacks of paper or paperboard, carpets,
tiles, etc. The electrode with stainless steel buttons covers an area
3 inches in diameter and has a penetration depth of 3/4 inch.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้น
Model
A8AF Radome Moisture Meter
Description:
Model
A8AF Radome Moisture Meter indicates moisture pockets in aircraft
radomes by measuring the RF dielectric power loss of material in
contact with the electrode sensor.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
 |
เครื่องวัดความชื้นสำหรับกระดาษ
–
Model AM-III Paper Moisture Meter
Description:
Model
AM-III Paper Moisture Meter permits instantaneous, nondestructive
moisture measurement from 0% to 15% on all types of paper and
paperboard rolls and stacks that are 2 inches
thick or more.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
|
เครื่องวัดความชื้นสำหรับกระดาษรีไซเคิล
กระดาษใช้แล้ว –
Model AM-III-B Paper Moisture Meter
Description:
Model
AM-III-B Paper Moisture Meter provides instantaneous, nondestructive
moisture measurement from 0% to 15% on single sheets of paper.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นสำหรับคอนกรีต
–
Model B Concrete Block Moisture Meter
Description:
The
Model B design is based on 40 years of experience in the field of
moisture testing. The instrument was specifically designed for the
concrete block industry under the guidance of C.M. Rollins, former
Director of Research, Basalt Rock Company. Mr. Rollins used the Model
B in conjunction with the ASTM Method C-140 to establish calibrations
for over 34 different kinds of concrete block that were procured from
more than 18 manufacturers throughout the United
States.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นเอนกประสงค์
–
Model DA8 All Purpose Digital Moisture Meter
Description:
Model
DA8 Digital Moisture Meter provides instant moisture readings from 0%
to 35% on a wide variety of materials, including carpet, yarn, cloth,
non-woven, baled cotton and tobacco, gypsum
board, etc. Up to 99 calibration tables can be stored in its memory
chip.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นสำหรับผลิตภัณฑ์ที่ทำจากไม้
เฟอร์นิเจอร์ ก่อนการทาสี-
Model DC-2000 Wood Moisture Meter
Description:
Model
DC-2000 Wood Moisture Meter is designed and calibrated to test the
moisture content of lumber, wood products, and surfaces to be
painted.
It provides fast and accurate digital moisture readout in the
moisture range of 5% to 65%.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
 |
เครื่องวัดความชื้นสำหรับกระดาษรีไซเคิล
กระดาษใช้แล้ว –
Model DC-2000-BP Baled Paper Moisture Meter
Description:
Model
DC-2000-BP Moisture Meter is calibrated to test the moisture content
in paper and other bales made up of scrap materials. It provides fast
and accurate digital moisture readout in the moisture range of 5% to
25%. Case not included.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นสำหรับผลิตภัณฑ์ที่ทำจากไม้
เฟอร์นิเจอร์ เป็นต้น -Model
DC-2000-C Wood Moisture Meter
Description:
The
Model DC-2000-C Wood Moisture Meter is a portable handheld
microprocessor with an external Electrode Assembly that provides fast
and accurate digital moisture readout in the moisture range of 5% to
65%. It is auto-ranging with self-checking and a low battery
indicator.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นสำหรับผลิตภัณฑ์จุกไม้คอร์ก
–
Model DC-2011 Cork Moisture Meter
Description:
The
Model DC-2011 Cork Moisture Meter is designed and calibrated for
testing moisture content in cork. It provides fast and accurate
digital moisture readout in the
moisture range of 4% to 22%. Case not included.
Download
PDF:
Printable
data sheet
|
|
|
เครื่องวัดความชื้นสำหรับผลิตภัณฑ์กาแฟ
–
Model G9 “Aqua Probe” for Coffee Beans
Description:
The
Model G9 “Aqua Probe” Moisture Meter for Coffee Beans is
calibrated for whole roasted, ground roasted, and whole green coffee
beans. |
|
|
เครื่องวัดความชื้นสำหรับตัวอย่างที่เป็นผงหรือเม็ด
–
Model G9 for Powdered and Granular Materials
Description:
Model
G9 Moisture Meter is designed for semi-solids, as well as powdered,
granular, or textile materials, and pliable papers in rolls or
stacks. |
|
 |
เครื่องวัดความชื้นสำหรับท่อนไม้ซุง
Model
L Lumber Moisture Meter
Description:
Model
L Lumber Moisture Meter is pre-calibrated for 77 hard and soft woods
in the 0% to 25% moisture range. It provides nondestructive tests and
moisture results.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นสำหรับแผ่นยิปซั่ม
–
Model LG Gypsum Moisture Meter
Description:
Model
LG Gypsum Moisture Meter is excellent for testing gypsum wallboard in
stacks or sheets. This instrument measures the moisture in the gypsum
plasterboard 1/4 inch to 3/4
inch thick and has a color-coded direct-reading dial for fast
comparison. It can be used to check the moisture distribution pattern
on the board, along either the length or width.
Download
PDF:
Printable
data sheet
/ Printable
product manual
|
|
 |
เครื่องวัดความชื้นสำหรับแผ่นยิปซั่ม
เซ็นเซอร์ปลายแบน
ไม่มีปัญหาไฟฟ้าสถิตย์ –
Model LGF Gypsum Moisture Meter
Description:
The
Model LGF Gypsum Moisture Meter is excellent for testing gypsum
wallboard as it moves or in stationary sheets
or stacks. This instrument has a stainless steel, flat-plate
electrode and measures the moisture in the gypsum plasterboard 1/4
inch to 3/4 inch thick. The meter has a color-coded direct-reading
dial for fast comparison. It can be used to check the moisture
distribution pattern on the board, along either the length or width.
The flat sensor can be slid along the wallboard surface without
concern for static charge buildup that might damage other sensors.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
|
เครื่องวัดความชื้นสำหรับงานปูนและไม้
Model
LP Plaster Moisture Meter
Description:
The
Model LP Plaster Moisture Meter is designed to test irregular, flat,
and curved surfaces on plaster and lumber.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
 |
เครื่องวัดความชื้นสำหรับห้องปฏิบัติการต่อพ่วงคอมพิวเตอร์
–
Model MCPC Laboratory Moisture Computer
Description:
The
Model MCPC Laboratory Moisture Computer uses the principle of
weight-corrected capacitance measured at radio frequencies to
determine a physical
property (dielectric constant) that can be related to moisture
content. This technique is useful in measuring moisture because RF
completely penetrates nonconductive materials and therefore can gauge
moisture throughout the material. The test is instantaneous and
completely nondestructive, and no sample heating or chemicals are
required. The Model MCPC is often used as a safe and inexpensive
replacement for the Karl Fischer chemical titration moisture
analysis. It also replaces heat lamp ‘moisture balance’ type heating
devices.
Download
PDF:
Printable
data sheet
|
|
|
เครื่องวัดความชื้นของตัวอย่างที่มีพื้นผิวเรียบ
เช่น กระดาษ พรม กระเบื้อง
ผ้า เป็นต้น –
Model N8 Narrow Materials Moisture Meter
Description:
The
Model N8 Moisture Meter has a narrow electrode and is designed for
flat, curved, smooth, or rough surfaces such
as cones or beams of yarn, rolls or stacks of cloth, rolls or stacks
of paper or paperboard, carpets, tiles, etc. The electrode with
stainless steel buttons covers an area of 1-1/4″ x 3″ and
has a nondestructive penetration depth of 1/2 inch.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นของม้วนกระดาษหรือตั้งกระดาษเแสดงผลแบบเข็ม
–
Model PM-80 Paper Moisture Meter
Description:
The Model PM-80 Paper Moisture Meter permits instantaneous,
nondestructive moisture measurement from 0% to 35% on all types of
paper and paperboard
rolls and stacks that are 2 or more inches thick.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
 |
เครื่องวัดความชื้นของตัวอย่างที่มีพื้นผิวเรียบ
เช่น กระดาษ พรม กระเบื้อง
ผ้า เป็นต้น –
Model T8 Thin Materials Moisture Meter
Description:
The Model T8 Moisture Meter uses the RF power loss method to
measure the moisture content of flat, smooth, thin materials
such as single sheets or 1/8-inch stacks of veneer, cloth, paper, or
paperboard products. The specifically designed electrode of three
concentric brass rings covers an area 3 inches in diameter and has a
shallow electrode with a nondestructive penetration depth of 1/8
inch.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
 |
เครื่องวัดความชื้นของตัวอย่างแผ่นไม้วีเนียร์
–
Model V Veneer Moisture Meter
Description:
The
Model V Veneer Moisture Meter obtains instantaneous,
nondestructive moisture analysis from 0% to 25% for 48 hard and
softwoods.
Download
PDFs:
Printable
data sheet
/ Printable
product manual
|
|
 |
Online
Continuous Moisture Measurement –
เครื่องวัดความชื้นแบบต่อเนื่องสำหรับการผลิตหรือโรงงานอุตสาหกรรมTouch
Screen Moisture
Description:
Moisture
Register Products introduces the new Model 910 ST Smart Touch screen
IR moisture analyzer. Moisture results are continuous, instantaneous
and non-destructive. Numerous process outputs are available to
provide automatic moisture control and data logging.Description
of unit:
910-ST
NIR Smart Touch Moisture Measuring System with Dry Filters for the
moisture range of 0% to 60%. Part No. 910-ST-D-2
- Panel Touch Screen PC-XP Displays
Moisture Conten
- Automatic Reflectance Gain Control
- Same calibrations used on multiple sites
- Current Output (4 mA to 20 mA), scaled;
isolated
- Isolated Opto-Coupler Transistor which
signals Loss of Product
- Scaling and Linearization via Serial
Data Port
- PC Software providedSoftware Window for
Product Calibration
- Software Window displays 1 hour Chart
|
|
 |
เครื่องวัดความชื้นแบบต่อเนื่องด้วยเซ็นเซอร์แบบ
NIR
– Model BSP-901 Moisture Measurement and Control System with NIR
Sensor 1Description:
To
determine moisture on a continuous basis, the Model BSP-901 Moisture
and Control System uses the principle of comparing reflected energy
at two near-infrared (NIR) wavelengths. A stabilized infrared source
is focused on the material to be measured, and reflected energy is
filtered at two different wavelengths—one calibrated specifically
for moisture and the other as a reference. The ratio of the two
signals is derived electronically, and the resulting moisture content
is presented on the digital display. This non-contact NIR technique
can measure near-surface moisture in a wide range of applications.
Download
PDF:
Printable
data sheet
|
|
|
เครื่องวัดความชื้นแบบต่อเนื่องด้วยเซ็นเซอร์คลื่นวิทยุ
–
Model BSP-901 Moisture Measurement and Control System with RF Sensor
1
Description:
The
BSP-901 RF Sensor employs a radio frequency (RF) power-loss technique
that operates at 2 MHz. The sensor projects an RF field into the
sample and measures the field power loss (change in RF dielectric
constant) caused by moisture. Thus, the system response is a measure
of the total water in the RF field, which is directly related to the
moisture content of the material. The underlying RF power-loss
absorption principle is a Moisture Register patented feature.
Download
PDF:
Printable
data sheet
|
|
|
เครื่องวัดความชื้นแบบต่อเนื่องด้วยเซ็นเซอร์คลื่นไมโครเวฟ
–
Model BSP-901 Moisture Measurement and Control System with the
Microwave Moisture Sensor 1
Description:
The
Microwave Moisture Analyzer has been designed to be compatible with
the BSP-901 Console to make a complete bale moisture measurement and
display system. The integrated system delivers all of the proven
features of the BSP-901. This bale application system is appropriate
for most baled moisture-content applications, including cotton,
tobacco, and recycled paper, to cite just a few. The microwave
analyzer can measure completely through the bale to show total
moisture content. What’s more, the measurement is just as accurate
whether the bale is moving or stationary.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นแบบต่อเนื่องด้วยเซ็นเซอร์คลื่นแบบ
NIR
– Model SMART II Moisture Measurement and Control System with NIR
Sensor 1Description:
To
determine moisture on a continuous basis, the SMART II Moisture and
Control System uses the principle of comparing reflected energy at
two NIR wavelengths. A stabilized infrared source is focused on the
material to be measured, and reflected energy is filtered at two
different wavelengths—one calibrated specifically for moisture and
the other as a reference. The ratio of the two signals is derived
electronically, and the resulting moisture content is presented on
the digital display. This non-contact NIR technique can measure
near-surface moisture in a wide range of applications. The Smart II
System also includes S2Comm communication software, which can be used
to display as many as four moisture meter outputs on any PC monitor.
Download
PDF:
Printable
data sheet
|
|
Model
SMART II Moisture Measurement and Control System with RF Sensor 1
Description:
The
SMART II RF Sensor employs a radio-frequency (RF) power-loss
technique that operates at 2 MHz. The sensor projects an RF field
into the sample and measures the field power loss (change in RF
dielectric constant) caused by moisture. Thus, the system response is
a measure of the total water in the RF field, which is directly
related to the moisture content of the material. The underlying RF
power-loss absorption principle is a Moisture Register patented
feature. The Smart II System also includes S2Comm communication
software, which can be used to display as many as four moisture meter
outputs on any PC monitor.
Download
PDF:
Printable
data sheet
|
|
 |
OPTIONAL:
ตู้ป้องกันการระเบิดสำหรับอุตสาหกรรมที่มีประกายไฟหรือมีโอกาสเสี่ยงในการติดไฟหรือระเบิด
–
Explosion-Proof Housing 1
Description:
An
Explosion-Proof Housing is available as an option for the BSP-901 and
the SMART II Moisture Analysis Systems.
Download
PDF:
Printable
data sheet
|
|
 |
OPTIONAL:
แผ่นสอลเทียบเซ็นเซอร์แบบ
NIR
– NIR Test Plate 1Description:
The
NIR Test Plate provides a quick and easy way to verify the results
obtained by Moisture Register Products’ NIR sensors.
Download
PDF:
Printable
data sheet
|
|
 |
OPTIONAL:
OPTO-PORT Sampling System Analyzer 1Description:
The
Opto-Port is a patented sampling device for use with the SMART II and
BSP-901 Moisture Analyzing Systems. The Opto-Port can perform
moisture measurement of powdered materials within a closed conveying
system such as within pneumatic piping or under a rotary airlock
valve. Installed directly into the conveying system, the stainless
steel Opto-Port is attached to a Moisture Register Products’ NIR
Sensor. Product moisture is read through a quartz window at the end
of the Opto-Port (usually inside a drop pipe). A regulated air blast
instantly removes old product from the measurement window so that a
new reading is taken every 3-5 seconds. No moving parts are necessary
to make the moisture measurement.
Download
PDF:
Printable
data sheet
|
|
 |
เครื่องวัดความชื้นแบบเข็มสัมผัส หลักการวัดค่าการนำไฟฟ้า
|
|
 |
เครื่องวัดความชื้นแบบเข็มสัมผัสดิจิตอล หลักการวัดค่าการนำไฟฟ้า
|
|
 |
เครื่องวัดความชื้นของม้วนกระดาษแบบลูกกลิ้งดิจิตอล
หลักการวัดค่าการนำไฟฟ้า
|
|
|
เครื่องวัดความชื้นแบบแท่งเสียบดิจิตอล หลักการวัดค่าการนำไฟฟ้า
|
|
 |
เครื่องวัดความชื้นความละเอียดสูงสำหรับห้องแล็ป หลักการวัดค่าการนำไฟฟ้า
|
|
 |
เครื่องวัดความชื้นแบบต่อเนื่องโดยใช้หลักการ
NIR,
RF, Microwave
|
