|
เครื่องทดสอบค่าการป้องกันแสง Sun Protection Factor (SPF) แบบอัตโนมัติพร้อมชุดคอมพิวเตอร์ประมวลผล รุ่น SPF-290S สำหรับทดสอบตัวอย่างโลชั่น ครีม เครื่องสำอาง สเปร์ย ของเหลว เป็นต้น สามารถรายงานค่า SPF, UVA/UVB Ratio, MPF, Absorbance และ Critical Wavelength ได้ ตัวเครื่องใช้แหล่งกำเนิดแสงแบบ Xenon Arc Lamp ขนาด 125 วัตต์ ครอบคลุมย่านความยาวคลื่น 290 ถึง 400 นาโนเมตรโดยรวมการวัดของแสงอุลตร้าไวโอเลตทั้งสองแบบได้แก่ UVA และ UVB
นอกจากการวัดค่า SPF แล้วเครื่องยังสามารถทดสอบผลิตภัณฑ์เพื่อหาค่าการทรงตัวของผลิตภัณฑ์ที่ขึ้นอยู่กับเวลา (Photo Sensitivity Test) ได้ นอกจากนี้ยังสามารถเลือกใช้อุปกรณ์สำหรับเลื่อนตัวอย่างทดสอบอัตโนมัติแบบสองแกน (X-Y Sampling Stage) เพื่อความสะดวกในการใช้งานและเพิ่มความแม่นยำในกรณีที่ต้องการทดสอบหลายจุด ผลการทดสอบสามารถถ่ายโอนเข้าระบบคอมพิวเตอร์ เพื่อเก็บผลการทดสอบและแสดงผลในรูปตารางและกราฟได้ |
Orange Photonics
Orange Photonics – ผู้ผลิตเครื่องมือวัด เครื่องทดสอบสารสำคัญจากผลิตภัณฑ์ กัญชง กัญชา (Cannabis Analyzer Model LightLab 3) โดยใช้เทคนิค Liquid Chromatography แบบพกพา (Portable) สามารถทดสอบนอกสถานที่ (Onsite Testing) เพื่อให้ได้ค่าที่แม่นยำ เพิ่มประสิทธิภาพและความสะดวกสบายในการวัด ภายในระยะเวลาประมาณ 10.5 นาที สามารถวัดค่าองค์ประกอบสาร Cannabinoid ได้หลากหลายตามหมวดการวัด พร้อมฟังก์ชันการเชื่อมต่อ WIFI และรองรับการทำงานด้วยแบตเตอรี่
CANNABIS Analyzer mode LightLab 3 Modules
· Δ9-THC, THC-A, CBD, CBD-A, CBN, CBG, CBG-A (Standard Module)
· CBN-A, CBC-A, CBC, Δ8-THC, Δ10-THC (Minor Module)
· Δ9-THC, THC-A, Total THC (Hemp Compliance)
CANNABIS ANALYZER Model
LightLab 3
The accurate and easy-to-use LightLab 3 Cannabis Analyzer lets non-technical users analyze cannabinoid content like a testing laboratory. LightLab uses two common analytical methods, liquid chromatography and spectroscopy, simplifying the process to make on-site testing affordable and easy.
Standard Cannabinoids
- Δ9-THC, THC-A, CBD, CBD-A, CBN, CBG, CBG-A
Minors Module
- CBN-A, CBC-A, CBC, Δ8-THC, Δ10-THC
Hemp Compliance
- Δ9-THC, THC-A, Total THC
Terpenes Module
- Semi-quantitative
Features
- 0-100% Cannabinoid analysis
- Results in 10.5 minutes
- Easy sample preparation
- Portable, rugged
- WiFi enabled
- 8-hour battery life
Sample Types
- Flower, Biomass, Young plant, Concentrates, Processed waste, Tinctures, Infused products, Edibles (Contact us)
EASY TO USE
LightLab 3 provides lab-grade cannabinoid analysis in a rugged, easy-to-use format. Its touchscreen streamlines and simplifies the entire analytical process so every team member can follow the same workflow to produce consistent results.
- Step-by-step – On-screen instructions guide you through each step of the sample preparation process based upon the sample type you select.
- Accessories – Your LightLab includes all the accessories you need to begin using LightLab right out of the box, including a scale, sample shaker and more.
- Tags – You have the option to include information about your sample including the operator’s name, sample ID etc. Each test result will automatically include date, time etc.
- Factory Calibration – LightLab arrives pre-calibrated and ready-to-use right out of the box. LightLab calibrations use Certified Reference Standards for traceability.
- Mobile Monitoring – LightLab’s Mobile Monitoring feature gives users the ability to remotely track testing progress from start to finish from a smartphone.
- Results – The results from your most recent tests, as well as previous tests, may be viewed on the screen, exported as a CSV file and shared via text or email directly from LightLab.
- Pro Mode – Advanced technical LightLab users may bypass guided screens to streamline workflow in Pro Mode and access chromatograms.
- Workbench Setup – If you run a high volume of tests from stationary workstation, a Workbench Setup will let you run more tests at a lower cost-per-test.
RESULTS
Sample analysis results are available in five formats.
1. On-screen – After you run your sample, your results will populate on LightLab’s screen. From this screen you can add additional details about the sample by tapping “notes” or you can tap “done” and run your next sample. You may also scroll through your test history to compare results.
2. Spreadsheet – LightLab provides a results spreadsheet (CSV) which gives you maximum flexibility and the opportunity to further analyze sample results in aggregate.
3. Report – You can use the CSV file to generate a full report, containing all the details about the sample you ran, including all inputted information such as moisture correction, operator, sample size and more.
4. Text and email – Once your LightLab is set-up on your Wi-Fi, you can share your results via text or email.
5. Mobile Monitoring – Get an instant notification when your test results are ready; view and share those results straight from your smartphone.
LightLab 3 results screen, all current modules shown.
Orange Photonics LightLab Brochure
LightLab 3 may be customized to meet your testing needs. LightLab’s standard configuration can report seven cannabinoids and additional modules can add greater capabilities to your LightLab.
Hemp Compliance
Compounds
- Δ9-THC, THC-A, Total Potential THC
Product
- Flower, Biomass, LOD 0.05%
Users
- Cultivators, Processors, Regulators
Terpenes
Compounds
- Semi-quantitative, Low, medium, high
Product
- Flower, Concentrates, Infused
Users
- Cultivators, Processors
Minors
Compounds
- CBN-A, CBC, CBC-A, Δ8-THC, Δ10-THC
Product
- Flower, Concentrates, Infused
Users
- Cultivators, Processors, Breeders
HEMP COMPLIANCE MODULE
On-site THC compliance testing has never been easier. LightLab’s Hemp Compliance Module takes the guess work out of crop monitoring delivering THC-A, D9-THC and Total Potential THC content between .05% and 3% with high precision. The additional capabilities, combined with LightLab’s cannabinoid panel tests, will allow you to get a complete picture of your crop’s cannabinoid production with real-time data.
- Monitor CBD/THC ratios
- Harvest at peak
- Schedule Department of Ag visits at the right time
- Verify Certificates of Analysis
- Evaluate biomass
Learn more about the Hemp Compliance Module here
TERPENES MODULE
Terpene molecules are responsible for the scent profiles of cannabis plants and products. They offer an indication of freshness, they impact the consumption experience, guide consumer preference and support product differentiation.
With the Terpenes Module, LightLab can analyze the richness of the sample’s terpene content without any changes in sample preparation or hardware upgrade.
Semi-Quantitative Analysis
Over 100 cannabis terpenes have been identified to date and those terpenes generally fall into two categories: monoterpenes and sesquiterpenes. Monoterpenes comprise 80% of cannabis terpenes. LightLab can analyze and quantify the monoterpenes present in a sample and uses that analysis to make an assumption about the monoterpene-sesquiterpene ratio in the sample. LightLab reports terpene content in samples as low, medium or high terpene content offering a great first-line analysis that can help cultivators and processors understand and value their product when terpene rich products are the end goal.
Low Terpene Range:
<1%
Medium Terpene Range: between 1% and 2%
High Terpene Range: >2%
No additional steps are required beyond the standard liquid extraction used for LightLab cannabinoid analysis. In addition, no additional analysis time is needed – LightLab calculates the terpene content at the same time as cannabinoid analysis.
MINORS MODULE
By their very nature, minor cannabinoids are uncommon and can be a valuable product differentiator. These minor cannabinoids in a plant or product can be an indication of unique genetics, an opportunity for product differentiation and measure of plant quality.
LightLab’s Minors Module analyzes the following five cannabinoids:
- CBC-A: Cannabichromenic Acid. CBC-A is the acidic form of CBC. It is non-psychoactive and is formed in some plant genetics alongside THC-A and CBD-A, typically at lower concentration. It’s a precursor is CBG-A. Some genetics will exhibit 1-5% CBC-A.
- CBC: Cannabichromene. CBC is the neutral form of CBC-A. CBC is often present in hemp and CBD containing plants, and more rarely in THC containing plants. Since many laboratories do not yet measure CBC, the Minors Module will allow hemp farmers, CBD growers and processors to select for higher CBC plants and differentiate their product with a new cannabinoid.
- CBN-A: Cannabinolic Acid. CBN-A is the acidic form of CBN. It is often formed from aged cannabis plants. Very old plants may contain 0-5% CBNA. CBN-A in combination with CBN are good indicators of the age and storage conditions of plant material. Higher CBN-A and CBN typically indicates old plant material or poorly stored plant material.
- Δ8-THC: Delta-8-Tetrahydrocannabinol. Δ8-THC is generally made by converting CBD or Δ9-THC in a chemical reaction. Note that the process used to create Δ8-THC often creates other cannabinoids, including Δ9-THC. When running a Δ8-THC sample, LightLab has a higher detection limit of 4% for flower samples and 12% for concentrates.
- Δ10-THC: Degraded THC, Dihydroxy-THC. In some cases, distillation can breakdown the THC molecule into by-products, reducing the potency of the product and affecting the taste. Two of the major breakdown components are CBN and Δ10-THC. LightLab can measure the amount of Δ10-THC, allowing distillation operators to ensure their product is pure and potent while maintaining high throughput. In some cases, extraction operators will intentionally attempt to generate novel cannabinoids through a degradation process. Δ10-THC is a precursor to most of the degradation products generated.
HOW IT WORKS
Built for Cannabis. Built for Performance.
LightLab was designed to be easy-to-use and deliver lab-grade accuracy. LightLab applies liquid chromatography which separates the cannabinoids, spectroscopy which uses light to analyze the sample’s compounds and linear regression mathematics to calculate sample results.
HIGH PERFORMANCE LIQUID CHROMATOGRAPHY
Your analytical laboratory likely uses High Performance Liquid Chromatography (HPLC) to analyze your hemp or cannabis sample. Like an HPLC, LightLab pushes an extracted cannabis sample through a column. The column separates the cannabinoids in the sample by slowing down cannabinoids by different amounts based on their affinity to the column. This allows each cannabinoid to exit the column at a different time. For example, CBD may exit the column first, then D9THC and so on. Once the column separates the cannabinoids, they move to the next step in the analytical process: spectroscopy.
ULTRAVIOLET SPECTROSCOPY
Spectroscopy uses light to measure the analytical composition of compounds. During the analytical process the sample flows between a light source and a detector. The detector will quantify how much light is getting through the sample. Since every cannabinoid has a particular light absorption signature LightLab can provide quantitative measurements. LightLab borrows spectroscopy technology from the Curiosity Mars Rover, providing an accurate and dependable analysis every time.
LIGHTLAB CHROMATOGRAM AND CALCULATIONS
When LightLab analyzes a sample, it separates cannabinoids over time and detects them with UV light at several wavelengths. An HPLC works in much of the same way, though in many cases only one wavelength of light is utilized. In a standard HPLC, the chromatogram shows peaks that represent different analytes; the area of the analyte is correlated with the concentration of that analyte. While LightLab uses the chromatogram as part of its analysis, the calculation is not a strict peak area calculation. Instead, LightLab uses a sophisticated multi-dimensional, non-linear regression to calculate results. This algorithm uses multiple UV wavelengths along with the chromatogram to determine the final results. This allows for a more robust and accurate measurement of cannabinoids even with challenging environmental conditions and complex samples.
RESULTs
Track. Share. Compare.
It has never been easier to track, share and manage your test data. Track test progress from your mobile device, share test results, and generate a Certificate of Analysis complete with authenticity verification controls.
Click image and scan QR code to reveal Result Dashboard
CERTIFICATE OF ANALYSIS
Generate a Certificate of Analysis (CoA) with the click of a button. The CoA reports the cannabinoid content of the sample in weight percent, limits of detection, user inputted sample identifiers, and automatically generated information such as time stamp and instrument serial number. A QR code on the report corresponds with the original test results and confirms the authenticity of the report itself.
MOBILE MONITORING
LightLab’s Mobile Monitoring feature gives users the ability to remotely track sample test progress, start to finish from a smartphone. This gives users the ability to step away from their LightLab and tend to other tasks while running a test. LightLab sends notifications when the next step of the testing process is ready and redirects to the Result Dashboard when the test is complete.
RESULT DASHBOARD
When a test is complete, a unique QR code is generated that brings you to a Result Dashboard, populated through an internet webpage. The Result Dashboard displays sample details and final results. From this page you can share your data to your social media pages or contacts, generate an official Certificate of Analysis, and download a CSV report.
RESULTS
Sample analysis results are available in five formats.
1. On-screen – After you run a sample, the results will populate on the LightLab. From this screen you can add additional details about the sample by tapping “Notes,” tap “Done” to run your next sample, or select “Share” to share your results via email or text. The share feature has two options for sending results; send the Certificate of Analysis or choose to send the Result Dashboard.
2. Certificate of Analysis – An official Certificate of Analysis (CoA) which includes user inputted sample identifiers and final results.
3. Result Dashboard – The Result Dashboard is a unique webpage displaying sample details and final results. From this page you can generate an official Certificate of Analysis, download a CSV report, and share sample details.
4. Report – You can use the CSV file to generate a full report containing the details about the sample you ran, including all inputted information such as moisture correction, operator, sample size and more.
5. Text and Email – Once your LightLab is set-up on Wi-Fi, you can share your results via text or email. Sharing capabilities include an official Certificate of Analysis or the Results Webpage.
CALIBRATION
District Derp’s Co-Owner, Chris, running samples on LightLab. Look for District Derp on social media to learn about their cutting-edge operation.
LightLab 3 is shipped to you calibrated and ready to run. After you have run 1,000 tests or after one year, whichever comes first, return your LightLab to Orange Photonics for a calibration service. LightLab calibrations use Certified Reference Standards.
The only hands-on maintenance required is the easy task of replacing the Selective Separation Column every 25 tests. LightLab runs a self-cleaning cycle automatically and therefore it does not require manual cleaning or flushing.
LIGHTLAB OPERATING EXPENSE
Like all lab-based liquid chromatography instrumentation, LightLab uses solvent to extract the cannabinoids from the sample. The same LightLab Extraction Solvent is also used as a carrier solution (mobile phase). LightLab Plant or Concentrate Test Kits include everything you need to run a sample in one economic package that includes vials, syringes, solvents, filters and Selective Separation Columns. Cost per test varies depending on the volume of tests required, but typically fall in the $3-5 price range.
LIGHTLAB WARRANTY
Your LightLab Cannabis Analyzer comes with a standard one-year factory warranty. An extended 2-year warranty option with calibration service is available.
Organomation
ผู้ผลิตเครื่องระเหยสารเคมี (Solvent Evaporator) เครื่องระเหยพร้อมระบบพ่นไนโตรเจน (Nitrogen Evaporator) เครื่องทำให้สารเข้มข้น เครื่องสกัดด้วยตัวทำละลาย เครื่องสกัดด้วยสารเคมี (Solvent Extractor) เครื่องสกัดแบบ Rotary Solid-Liquid Soxhlet Extractor เครื่องสกัดแบบ Rotary Liquid-Liquid Soxhlet Extractor สามารถระเหยหรือสกัดได้หลายตัวอย่างในเวลาเดียวกัน เครื่องผลิตก๊าซไนโตรเจน (Nitrogen Generator) เครื่องทำความเย็นแบบไหลเวียนระบบปิด (Chiller) สำหรับการทดสอบทางด้านปิโตรเลียม ปิโตรเคมี พลาสติก โพลิเมอร์ อาหาร เครื่องดื่ม ยา เครื่องสำอาง สารสกัด หัวน้ำหอม เหมาะสำหรับห้องแล็ป หน่วยงานวิจัย และสถาบันการศึกษา มหาวิทยาลัย เป็นต้น
Nitrogen
Generators
Laboratory
Chillers
Nitrogen Evaporators
Organomation manufactures and distributes three product lines of nitrogen evaporators for analytical chemistry sample preparation. Our N-EVAPs, MULTIVAPs, and MICROVAPs have been used for over 50 years in laboratories around the world.
Organomation nitrogen evaporators combine a heated bath with nitrogen blow down for fast and gentle sample concentration.
Flexibility and Individualization for Diverse Samples
Consistency for Large Batch Concentrations
Compact for Microplates and Small Batches
N-EVAP Product Line
Organomation’s N-EVAP nitrogen evaporators are extremely well suited for numerous sample preparation methodologies. We have created a diverse product line with instruments ranging from six to forty-five sample positions. Our nitrogen evaporators utilize adjustable nitrogen blow down technology allowing for full control of nitrogen flow to samples, with no wasted nitrogen gas. We combine this technology with uniform heat applied efficiently through either water or dry baths. This technique saves labs money by simultaneously maximizing solvent evaporation volume and rate.
6 Position N-EVAP Nitrogen Evaporator
12 Position N-EVAP Nitrogen Evaporator
24 Position N-EVAP Nitrogen Evaporator
34 Position N-EVAP Nitrogen Evaporator
45 Position N-EVAP Nitrogen Evaporator
20 Position Auto N-EVAP Nitrogen Evaporator
MULTIVAP Product Line
Organomation’s MULTIVAPs are ideal for concentrating large batches of samples, and are used in numerous sample preparation methodologies. The 9, 30, 48, and 80 position units are available in high temperature dry block models, while the 64 and 100 position models utilize our classic water bath to maximize sample evaporation. Nitrogen gas is delivered to each sample via individual stainless steel needles connected to the hand built gas distribution manifold. All of our MULTIVAPs include a built in timer to shut heat and nitrogen gas off for maximum efficiency.
Our nitrogen evaporators utilize adjustable nitrogen blow down technology allowing for full control of nitrogen flow to samples, with no wasted nitrogen gas. We combine this technology with uniform heat applied efficiently through either water or dry baths. This technique saves labs money by simultaneously maximizing solvent evaporation volume and rate.
Dry Block:
Water Bath:
MICROVAP Product Line
Organomation’s MICROVAP laboratory evaporators are used in numerous sample preparation methodologies, and are designed for controlled concentration of small samples.
These instruments are light, compact and digitally controlled for ease of use.
The MICROVAPs are offered in four different models, providing versatility for many different sample preparation applications. The single and triple position MICROVAP microplate evaporators condense samples held within 96 well plates, and can accommodate both deep well and micro well plates. The 15 and 24 position MICROVAP laboratory evaporators are intended for small batch solvent evaporations, such as concentrations of sample batches in microcentrifuge tubes.
Microplate Evaporators |
|
|
|
Small Batch Evaporators |
|
|
|
Solvent Evaporators
One of the largest downsides to traditional organic extraction procedures is the large volumes of solvent that are evaporated with no procedure for collection and proper disposal. The lack of an efficient solvent recovery process can lead to health and environmental hazards as volatile organic solvents are released into the environment. Organomation’s S-EVAP solvent evaporators with solvent collection condense and collect excess solvent into individual or central collection flasks.
The S-EVAP-RB and S-EVAP-KD are each capable of up to 97% solvent recovery.
The S-EVAP-RB and S-EVAP-KD easily evaporate large volumes of solvent out of samples to leave dry or concentrated samples for analysis or further processing.
S-EVAP-RB for round flasks
S-EVAP-KD for Kuderna Danish flasks
S-EVAP-KD
Solvent Evaporators for Kuderna Danish (KD) Flasks
The S-EVAP-KD instruments are available in two temperature control options: digital control or mechanical thermostat. There are also several different models to accommodate various flask sizes (250 ml, 500 ml, and 1000 ml).
Digital Temperature Control:
12010 – Samples up to 250 ml, 10
positions
12018 – Samples
up to 500 ml, 8 positions
Mechanical Thermostat:
12027 – Samples
up to 250 ml, 8 positions
12037 – Samples
up to 500 ml, 5 positions
The S-EVAP KD combines standard KD evaporation procedures with
our unique rotary water bath and manifold, increasing sample through put and bench space. The S-EVAP-KD comes in 5, 8, and 10 position models.
Organomation’s S-EVAP solvent evaporators have a broad range of applications including oil and grease analysis using Freon and other approved solvents, concentrating extracted materials from Soxhlet operations, and other KD evaporation methods.
At each sample position the KD flask rests on the bath cover disk and the concentrator tube sits partially submerged in the deep water bath below the cover disk. The solvent boils from the flask and through the Snyder
column. The solvent vapor then cools in the condenser which is attached to a centrally located water manifold. The glassware is held in place with quick disconnect fittings which allow for easy retrieval of samples. The solvent leaves the condenser through a specially designed side arm into either an individual collection flask or a centrally located solvent collection vessel. Solvent recovery through individual or central collection options reduces laboratory emissions and increases laboratory and environmental safety. The S-EVAP-KD comes standard with Organomation’s reduced height glassware so that the instrument can fit into a standard fume hood.
S-EVAP-RB
Solvent Evaporators for Round Flasks
The S-EVAP-RB instruments are available in two temperature control options: digital control or mechanical thermostat. There are also several different models to accommodate various flask sizes (500 ml, 250 ml, and 125 ml).
Digital Temperature Control:
12090 – Samples
up to 250 ml, 10 positions
12008 – Samples
up to 500 ml, 8 positions
Mechanical Thermostat:
12060 – Samples
up to 250 ml, 8 positions
The S-EVAP-RB solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using Freon and other approved solvents and concentrating extracted materials from Soxhlet operations. The instrument consists of a base and stand assembly, mounted in a shallow round bath. The entire instrument rotates so that all samples are accessible from the front. At each sample position the round sample flask rests on the bath cover disk and is heated by hot water and steam. The solvent boils from the flask and cools in the condenser which is attached to a centrally located water manifold. The solvent leaves the condenser through a specially designed side arm into an individual collection flask. Solvent recovery through individual collection reduces laboratory emissions and increases laboratory and environmental safety.}
Solvent Extraction Instruments
You are in the lab and need to run multiple extractions at once. First you set the Soxhlet extractors up on individual heating mantles or baths. Next, tubing is individually attached to each of the condensers. There are dozens of tubes to deal with, and multiple heating mantles to monitor. The problem with this arrangement is that in the end, you have spent more time assembling and monitoring your apparatuses than performing the actual chemistry.
The ROT-X-TRACT
product lines eliminate chaos and wasted time by allowing for up to 8, or 10 extractions to be performed simultaneously in a single bath with a single water manifold.
To conserve valuable bench space, all samples are arranged in a circle and the instrument rotates allowing each sample to be accessed from the front. Individual condensers are connected to the centrally located water manifold through quick disconnect fittings. The water supply and drain manifolds have one water supply line in, one drain line out, allowing the instrument to rotate freely without tangling the tubing.
ROT-X-TRACT-S – Rotary
Solid-Liquid Soxhlet Extractor
ROT-X-TRACT-L – Rotary
Liquid-Liquid Soxhlet Extractor
ROT-X-TRACT-LC – Corning
Accelerated One-Step Liquid-Liquid Extractor
Nitrogen Generators
NITRO-GEN – Lightweight unit for fast nitrogen
generation; runs off an external air compressor
NiGen
40-1 – All-In-One solution with
integrated air compressor
Laboratory Chillers
Ortoalresa
ผู้ผลิตเครื่องทดสอบค่าน้ำและตะกอน (Water & Sediment) ด้วยการปั่นเหวี่ยง (Centrifuge) มีให้เลือกทั้งแบบควบคุมอุณหภูมิเย็น (Cooling Control with Refrigeration) และแบบให้ความร้อนขณะปั่นเหวี่ยง (Heating Control) หรือแบบไม่มีระบบควบคุมอุณหภูมิ สามารถรองรับตัวอย่างได้หลากหลาย เช่น น้ำมันดีเซล น้ำมันเตา น้ำมันหล่อลื่น น้ำมันหล่อลื่นใช้แล้ว น้ำมันหม้อแปลง ตัวอย่างทางจุลชีวะ จุลินทรีย์ ไบโอเคมี ตัวอย่างเลือด เครื่องสำอาง สารเคมี โพลิเมอร์ เยื่อกระดาษ สารเคลือบ สารลดแรงตึงผิว สี กาว เป็นต้น นอกจากนี้ยังมีเครื่องนึ่งฆ่าเชื้อ (Autoclave) เครื่องทำน้ำกลั่นสำหรับห้องปฏิบัติการ (Water Distiller) เครื่องเขย่าตะแกรงร่อน (Sieve Shaker) เครื่องบดตัวอย่างด้วยเม็ดบด (Ball Mill)
เครื่องปั่นเหวี่ยงสำหรับการทดสอบทั่วไป /Centrifuges for general applications
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
เครื่องปั่นเหวี่ยงสำหรับการทดสอบทั่วไปเฉพาะด้าน / Centrifuges for special applications
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
|
เครื่องปั่นเหวี่ยง |
เครื่องทดสอบอื่นๆ / Other laboratory products
|
เครื่องนึ่งฆ่าเชื้อ |
|
เครื่องทำน้ำกลั่นสำหรับห้องปฏิบัติการ |
|
เครื่องบดตัวอย่างด้วยเม็ดบด |
|
เครื่องเขย่าตะแกรงร่อน |
Pamas
PAMAS เป็นบริษัทผู้ผลิตเครื่องนับจำนวนและวัดขนาดอนุภาค (Particle Counter) หรือเครื่องวัดระดับความสกปรกของของเหลว เครื่องวัดประสิทธิภาพในการกรอง เหมาะสำหรับการทดสอบน้ำมันหล่อลื่น น้ำมันไฮโดรลิค น้ำมันเครื่องบิน น้ำมันเชื้อเพลิง ตัวทำละลาย น้ำดื่ม น้ำเสีย และของเหลวอื่น ๆ ทุกชนิด มีให้เลือกทั้งแบบทดสอบนอกสถานที่ (Portable) แบบตั้งโต๊ะสำหรับห้องปฏิบัติการ (Laboratory) และแบบทดสอบต่อเนื่อง (Online)
PARTICLE COUNTERS – LABORATORY |
|
PAMAS SBSS เครื่องนับจำนวน และวัดขนาดอนุภาคสำหรับห้องปฏิบัติการ สำหรับวัดค่าระดับความสกปรกของน้ำมันหล่อลื่น น้ำมันไฮโดรลิก ตัวทำละลาย และของเหลวอื่นๆ ทุกชนิด Laboratory particle counter for all viscous fluids Versatile sample preparation ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS SBSS english
|
|
PAMAS SBSS WG
เครื่องนับจำนวน และวัดขนาดอนุภาคสำหรับห้องปฏิบัติการ สำหรับตัวอย่างของเหลวไฮโดรลิคที่มีน้ำเป็นองค์ประกอบ – Water Based Hydraulic Fluids (Water-Glycol) Laboratory particle counter for water based hydraulic fluids (Water-Glycol) Versatile sample preparation ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS SBSS WG english
|
|
PAMAS SVSS
เครื่องนับจำนวน และวัดขนาดอนุภาคสำหรับห้องปฏิบัติการ สำหรับทดสอบตัวอย่างที่มีค่าความหนืดต่ำ หรือของเหลวที่ใช้สำหรับการชำระล้าง Laboratory particle counter for low viscosities For infusion solutions and clean fluids ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS SVSS english
|
|
PAMAS FastPatch 2 GO
เครื่องนับจำนวน และวัดขนาดอนุภาคแบบอัตโนมัติสำหรับห้องปฏิบัติการ สามารถวัดได้ทั้งอนุภาค และเส้นใย ความละเอียดระดับไมครอน Advanced automatic microscope system For particle counting and fibre analysis ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS FastPatch 2 GO english
|
|
PAMAS AS2 เครื่องนับจำนวน และวัดขนาดอนุภาคแบบอัตโนมัติสำหรับห้องปฏิบัติการ พร้อมระบบสายพานลำเลียงตัวอย่างเข้าสู่เครื่องทดสอบ Fully automated particle counting system Contamination analysis of several hundred samples a day ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS AS2 english
|
|
PAMAS AS3 เครื่องนับจำนวน และวัดขนาดอนุภาคแบบอัตโนมัติสำหรับห้องปฏิบัติการ เหมาะสำหรับการทดสอบตัวอย่างที่มีจำนวนมาก สามารถทดสอบได้ไม่ต่ำกว่า 200 ตัวอย่าง ภายใน 8ชั่วโมง Fully automated particle counting system Contamination analysis of several hundred samples a day ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS AS3 english |