IDM Test เป็นผู้ผลิตเครื่องมือทดสอบสำหรับอุตสาหกรรมเยื่อกระดาษ กระดาษ ทิชชู่
สิ่งพิมพ์ พลาสติค และบรรจุภัณฑ์
เครื่องมือทดสอบสำหรับอุตสาหกรรมเยื่อกระดาษ
PTI RAPID-KÖTHEN SHEET FORMER
 |
|
Cod. 0708xx
Standard: ISO 5269/2, DIN 54 358
Laboratory standardized hand sheet former. This machine has the formation column and the dryers incorporated. Easy and quick machine with a manual and an automatic version. Possibility of white water circulation system. |
SEMI-AUTOMATIC PTI SHEET FORMER
 |
|
Cod. 070818
Standard: ISO 5269/1, SCAN C26, TAPPI T205
Semi automatic sheet former with automatic filling, agitation, calmness, emptying and drainage. |
TECHPAP DYNAMIC SHEET FORMER
 |
|
Cod. 070828
The dynamic sheet former has been designed to make rectangular sheets in laboratory, in similar conditions as the sheet former. This system allows the sheet formation with different fibres orientation. It also allows several layers sheets formation. |
PTI MANUAL SHEET FORMER
 |
|
Cod. 070816
Standard: ISO 5269/1, SCAN C 26, TAPPI T205
Manual Sheet Former machine. Made of stainless steel or cast iron. |
PFI MILL IDM
 |
|
Cod. 070101
Standards: ISO 5264/2, TAPPI T248, DIN-EN 25 264-2, SCAN C24
Laboratory equipment to beat chemical or semi-chemical pulps under standardized conditions. Rapid beating of small amounts of pulp (30 gr.). Beating pressure with weight. Pressing the “Start” button automatically starts the beating program and it stops automatically after reaching the adjusted number of revolutions. Beater roll and cointaner are made of stainless steel. |
JOKRO PTI MILL
 |
|
Cod. 070108
Standard: ISO 5264/3, DIN 54 360, EN 25 264/3
Laboratory equipment for beating pulp under standardized conditions. Equipment with 6 independent beating devices. Used basically in Eastern European countries. |
PTI DRUM DRYER
 |
|
Cod. 070703
Laboratory instrument to dry paper sheets. Made of a similar felt as those of the paper machines. Speed rotation and drying temperature adjustable. |
PTI SCHOPPER-RIEGLER FREENESS TESTER
 |
|
Cod. 070201
Standard: ISO 5267/1, SCAN C19/M3, BS 6035/1
Instrument to determine the refining degree and the drainage speed of the paper pulps. Pneumatic, manual and digital equipments. |
PTI CANADIAN STANDARD FREENESS TESTER
 |
|
Cod. 070206
Standards: ISO 5267/2, TAPPI 227, BS 6035/2, SCAN C21
Equipment to measure the refining degree of the paper pulp according to the canadian method. |
DISTRIBUTOR PTI FOR PULP
 |
|
Cod. 070601
Equipment to melt beaten and refined pulp samples and tip off the fibre compact in the sheet formation in laboratory. |
PTI DESINTEGRATOR EQUALIZER
 |
|
Cod. 070605
Mixed equipment to desintegrate and melt pulp in laboratory during the sheet formation. |
PTI BAUER MC-NETT FIBRE CLASSIFIER
 |
|
Cod. 070301
Standard: TAPPI T233, SCAN M6, PACTAC C5V
Equipment with 3, 4 or 5 tank units to determine the fibre length of pulp in pulp papers by classification. |
PTI SOMERVILLE SHIVE CONTENT ANALYSER
 |
|
Cod. 070401
Standard: TAPPI T275, UM 242
Equipment to determine the shive content and stickers in pulp. |
PTI BRECHT-HOLL FRACTIONATOR
 |
|
Cod. 070405
Standard: FAK Merkblatt 201, Zellcheming Merkblatt VI/I/66
Equipment to classify mechanical pulp and shive content analysis. Method used in the Eastern European countries similar to the Somerville shive content Analyser. |
PTI CHIP CLASSIFIER
 |
|
Cod. 070501
Standard: TAPPI UM 21, SCAN CM 40/80The chip classifier has 4 or 5 trays for the wood chips. These trays made in aluminium. Non noise equipment. |
PULMAC POLLUTANT CLASSIFIER IN MASTER SCREEN PULP
 |
|
Cod. 070406
Standard: TAPPI T274
Pulmac mechanical classifier for all kind of pollutants in pulp as dust, stickers, and chips. The equipment is used for virgin pulp as well as for recycled pulps. The pollutants rest in a filter paper that later can be analyzed with an image analysis system. The equipment has a quick measurement system, in 5 to 10 minutes the results will be obtained. |
PTI DESINTEGRATOR
 |
|
Cod. 070607
Standard: ISO 5263, SCAN C18/M2, TAPPI T205
Equipment for the desintegration of pulp suspension. Made entirely in stainless steel. Stainless stell and acrylic transparent pot to see the desintegrator evolution. |
TECHPAP Compact MORFI FIBER ANALYSER
 |
|
Cod: 071102
This equipment provides high resolution analysis of pulp fibre and shives. Analysis includes length, width, curl, kink and coarseness of the fibre, as well as shives and fines analysis. The Morfi can measure thousands of fibres quickly with high accuracy with no need of special sample preparation. The system has no capillary tubes that could plug and is easy to maintain. |
TECHPAP MORFI WT FIBER WALL ANALYSER
 |
|
Cod: 071101
This equipment has been developed by the CTP, to measure in few minutes the wall of the paper fibres. Is a complementary equipment to the Morfi Compact and will add high accuracy thickness results (0,7μ) of the fibre wall, its measurement and its distribution. |
TECHPAP RETENTION TESTER
 |
|
Cod: 071201
The Retention tester is used to study the influence of the additives on the paper manufacture, specially the retention, sizing and wet strength additives. The pulp is agitated and diluted to the right consistence, the additives are added and mixed with the pulp and the paper sheet is quickly made. The same fabric as the ones used on the MP can be used. The White water is collected for analysis and the dynamic drainage behaviour is displayed. |
PTI DYNAMIC JAR
 |
|
Cod: 071203
Evolved Original Dynamic Jar from DDJ. Measures the retention dosage and drainage. It is possible to add a chemical products dosage device and an empty unit. Easy use equipment. |
LABORATORY PULPER
 |
|
Cod: 071001
Stainless Steel equipment to defibration of virgin or recycled pulps. Available in 3 sizes 8,17 and 45 litres, to work from 30 to 350 grams of pulp and a consistence range between 2 and 7%. Rotor speed adjustable up to 1500 revolutions per minute. |
PTI FLOTATION CELL
 |
|
Cod: 071204
Equipment designed to simulate the ink elimination in paper on the laboratory. Totally Automatic equipment with the possibility of working manually. Work consistence up to 2% depending on the ashes content. |
PNEUMATIC SHEET PRESS
 |
|
Cod. 070902 & 070903
Standards: ISO 5269/1, TAPPI T205, SCAN C26/M5
Pneumatic sheet press to crush pulp moist sheets and paper, under standard conditions. |
PULMAC ZERO SPAN 1000
 |
|
Cod. 080302
Equipment to obtain the fibres Zero-Span and the Short-Span. This is the Pulmac basic and manual model. Allows to know the traction strength in fibres and also their union force. With this equipment it is possible to recognize the pulp differences during manufacture and be able to correlate it with the different coil physic parameters. |
PULMAC ZERO SPAN 2000
 |
|
Cod. 080303
Equipment to obtain the fibres Zero-Span and the Short-Span. This is the Pulmac automatic model. Allows to know the traction force in fibres and also their union force. It allows to make test in dry sheets as well as in moist. With this equipment it is possible to recognize the pulp differences during manufacture and be able to correlate it with the different coil physic parameters. |
PULMAC ZERO SPAN 3000
 |
|
Cod. 080304
Equipment to obtain the fibres Zero-Span and the Short-Span. This is the Pulmac automatic model, that includes the formation station of the sheets to be tested. As it is totally automatic, there are no errors during the sheet formation. It also allows to know the traction force in fibres and also their union force. It allows to make test in dry sheets as well as in the moist ones. With this equipment it is possible to recognize the pulp differences during manufacture and be able to correlate it with the different coil physic parameters. |
PTI PULP CENTRIFUGE
 |
|
Cod. 071208
High speed laboratory centrifuge, to centrifuge pulp samples. It has 4 positions of 100ml, that can centrifuge 150 grams of pulp. The revolutions can be adjusted from 100 to 14.000 r.p.m. Robust equipment with easy water discharge. |
TECHPAP PULP AIR TESTER
 |
|
Cod. 071202
Equipment designed to measure the air in cellulose pulp suspensions. Easy use equipment and specially designed to evaluate the air in pulp during the different steps of manufacture. The air tester main frame is made in stainless steel. |
PTI AUTOMATIC KAPPA NUMBER ANALYSER
 |
|
Cod. 071209
Standard: TAPPI T236, ISO 302, SCAN C1, PACTAC G.1 |
Automatic Kappa Numero analyser with control & results software. This equipment calculates automatically the quantity of lignina in pulp. |
PTI PULP VISCOSIMETER
 |
|
Cod. 071207
Standard: TAPPI T230, ISO 5351/1, ISO 5351/2, SCAN C15, PACTAC G.24P
The Semi-automatic PTI Viscosimeter calculates easily and quickly the pulp viscosity in standard conditions. Ubbelohde or Cannon Fenske head measuring system according to the standards. |
VALLEY LABORATORY BEATER PTI
 |
|
Cod. 070107
Standards: ISO 5 264/1, SCAN C25, TAPPI T200, PAPTAC C2
For beating of pulp under standardized conditions for laboratory purposes. |
NEUMATIC SCHOPPER ” LHOMARGY TYPE “
 |
|
Cod. 070204
Standards: ISO 526/7, SCAN C 19M3, Zellcheming Merkblatt V/7/61, BS 6 035/1
For determination of the freeness and the drain ability speed of fibre, ground wood and mechanical pulp. |
DIGESTER WITH SHAKING IDM
 |
|
Cod. 071305
For cooking and production of fibrous and non-fibrous papermaking in the laboratory. |
เครื่องมือทดสอบสำหรับอุตสาหกรรมกระดาษและสิ่งพิมพ์
DIGITAL MANUAL MICROMETER FOR PAPER
 |
|
Cod: 010104
Standards: ISO 534, TAPPI T411, SCAN P7, EN 20534
Top table Micrometer to measure the thickness on paper sheets. 0,001mm resolution. Also available a Pneumatic model. |
FRANK UNIVERSAL MICROMETER
 |
|
Cod: 010109
Standards: ISO 534, SCAN P7-P11-P47, FEFC Nº3, TAPPI T411
Automatic Micrometer with head and weights interchangeable, for several uses. It is also possible to make in series measurements. Complete Statistics |
PTA LINE AUTOMATIC DIGITAL MICROMETER
 |
|
Cod: 010118
Standards: ISO 534, TAPPI T411, SCAN P7, EN 20534Top table micrometer to measure the thickness in paper. Resolution 0,001mm and range up to 25mm. It is one of the PTA LINE mouldable equipments. Large Touch Screen with complete statistics. |
FRANK SCT CRUSH TESTER
|
 |
Cod: 040103
Standards: ISO 9895, TAPPI T 826, DIN 54518, BS 7325SCT Short Compression tester. Measures the compression strength on paper and cardboard samples. Screen with compression curve and complete statistics. |
FRANK HORIZONTAL TENSIL TESTER
 |
|
Cod: 030108
Standards: ISO 1924/2, TAPPI T494 y T456, BS 4415/2Automatic Equipment to make tensile tests in moist and dry paper. Automatic sample detection. Pneumatic clamping. TEA value and complete statistics. It has an special water tank for moist tissue paper tests. |
PTA LINE HORIZONTAL TENSIL TESTER
 |
|
Cod: 240122 y 240123
Standards: ISO 1924/2, TAPPI T494 y T456, BS 4415/2Automatic equipment to make tensile tests with dry samples. Automatic sample detection. Pneumatic clamping. TEA value and complete statistics. Working as an independent equipment, the test can be done in both senses of the sheet. If it is working in a PTA line, two equipments will be needed. |
MTC-100 IDM TENSIL TESTER – Vertical –
 |
|
Cod: 030101
Standards: ISO 1924/2, TAPPI T494 y T456, BS 4415/2
Automatic equipment to make tensile tests in moist and dry paper. PC with touch screen. It is also possible to make other tests as adhesion, friction, tear …. and so on. |
FRANK VERTICAL TENSILE TESTER
 |
|
Cod: 030109
Standards: ISO 1924/2, TAPPI T494 y T456, BS 4415/2
Automatic equipment to make tensile tests in moist and dry paper. PC with touch screen. It is possible to make other tests as: adhesion, friction, tear, … and so on. |
IDM EM-50 MULLEN BURST TESTER WITH DIGITAL DISPLAY
 |
|
Cod: 020101
Standards: ISO 2758, TAPPI T403 y T807, ASTM D477, BS 3137
Pneumatic laboratory equipment to make Mullen burst tests in paper. Graphic display with burst values, BEA value and complete statistics. |
PTA LINE BURST TESTER WITH GRAPHIC SCREEN
 |
|
Cod. 020103
Standards: ISO 2756, TAPPI T403 y T807, ASTM D477, BS3137
Laboratory equipment to determine the Mullen burst on paper. Graphical screen representation of the curve of pop and burst index value and complete statistics. |
FRANK MULLEN BURST TESTER SCHOPPER METHOD
 |
|
Cod: 020104
Standards: 53 861/2Equipment manufactured according to the schopper method to obtain the burst strength in paper, multilayers and aluminium. Adjustable speed and complete statistics. Pore detection system and bubble height meter. |
PTA LINE BENDTSEN SMOOTHENESS/POROSITY TESTER, 1, 2 or 3 HEADS
 |
|
Cod. 170202
Normas: ISO 5636/3 y 8791/2, DIN 53108, SCAN P21
Equipo para la medición de la Lisura y la Porosidad en el papel. Posibilidad de medir la lisura por las dos caras y la porosidad simultáneamente (opcional) |
BENDTSEN SMOOTHNESS/POROSITY TESTER – CAPILLARY TUBES –
 |
|
Cod: 170206
Standards: ISO 5636/3 y 8791/2, DIN 53108, SCAN P21 y P60, BS 4420
Traditional tubes equipment to measure the Bendtsen smoothness and porosity. Paper smoothness, porosity and hardness heads. |
PTA LINE PARKER PRINT SURF (PPS) SMOOTHENESS AND POROSITY TESTER 1, 2, or 3 HEADS
 |
|
Cod: 170101
Standards: TAPPI T555, ISO 8791/4, BS 6563
Equipment to measure the paper smoothness and porosity in similar conditions as the printing ones. Measuring range from 0,6 to 14 μm. Two measure areas: hard and soft. It is possible to measure the smoothness in both sides and the porosity simultaneously. |
PTA LINE BEKK SMOOTHNESS TESTER 1 or 2 HEADS
 |
|
Cod: 170302
Standards: ISO 5627, DIN 53107, TAPPI T475
Automatic Bekk smoothness tester. It is possible to measure both sides of the paper at the same time with two measure heads (optional). Different test volume, with estimated value by extrapolation, in papers with high Bekk values. |
FRANK GURLEY POROSITY TESTER
 |
|
Cod: 170402
Standards: ISO 5636/5, SCAN P19, TAPPI T460 , BS 6538/3
Manual or Pneumatic equipment to obtain the paper Gurley porosity value. It is possible to digitalize and robotize olden equipments. |
VASE DE MARIOTTE” POROSITY TESTER
 |
|
Cod: 170501
Standards: ISO 5636/2, NF Q 03.075
Equipment to measure the paper porosity according to the Schopper method. System based on the porosity measurement at different pressures, following the Poiseuille law. |
FRANK TABER ABRASION TESTER
 |
|
Cod: 180201
Standards: DIN 53 109, 53 799, 52 347 TAPPI T476
TABER Abrasion tester, for paper samples. With two dust testing heads, abrasion resistance. Air is sucked through the sample in order to be measured. |
FRANK ELMENDORF TEAR TESTER WITH AUTOMATIC PENDULUM RETURN
 |
|
Cod: 130101
Standards: ISO 1974, DIN 53128, EN 21974, SCAN P11, TAPPI T414, BS 4468
Fully automatic. With clamping, samples cutting, test and return automatic. Tear value, tear index and complete statistics. |
FRANK MANUAL ELMENDORF TEAR TESTER
 |
|
Cod: 130105
Standards: ISO 1974, DIN 53128, EN 21974, SCAN P11, TAPPI T414, BS 4468Manual tear tester. Clamping, samples cutting and pendulum release manual. |
FRANK UNIVERESAL STIFFNESS TESTER
 |
|
Cod: 220101
Standards: ISO 2493, SCAN P29, DIN 53121, BS 3748, TAPPI T556, NFQ 03-048
Complete stiffness tester, with taber stiffness measure, bending resistance, stress and recovering. In small packaging, it measures the crevasse strength, stress and recuperation. |
KODAK STIFFNESS TESTER
 |
|
Cod: 220103
Standards: ISO DP 5629, NF Q 3025, DIN 53 123/1
Equipment to measure the stiffness by resonance. Easy to use, with results comparables to other methods. With a big magnifying glass to make easier the measurements |
PTI SEMI-AUTOMATIC COBB INSTRUMENT
 |
|
Cod: 090113
Standards: ISO 535, SCAN P12, DIN 53 132, TAPPI T441, BS EN 20535
Semi-automatic equipment compound of a roll, a cylinder and a chronometer. It is used to obtain the water absorption of paper and cardboard. |
IDM COBB INSTRUMENT
 |
|
Cod: 090107 y 090108
Standards: ISO 535, SCAN P12, DIN 53 132, TAPPI T441, BS EN 20535Compound of a cylinder ( Cód. 090107 ) and a roll ( Cód. 090108 ), to obtain the water absorption in paper and cardboard. |
IDM INTERNAL BOND TESTER
 |
|
Cod: 080106 y 080107
Standards: TAPPI T833 y T569
Digital equipment to obtain the internal bond adhesion measurements in paper and cardboard. Manual model with automatic samples preparation. It is possible to order the sample preparation alone to make test in olden equipments. |
IDM INTERNAL BOND TESTER PENDULUM IBT-10A
 |
|
Cod: 080102
Standards: TAPPI T833 y T569
Digital equipment to obtain the internal bond adhesion measurements in paper and cardboard. Pendulum completely automatic with pendulum return after the test. Interchangeable pendulums with 3 measurement scales for the different kind o papers. Complete statistics calculus. |
IBP-5A IDM INTERNAL BOND TESTER AUTOMATIC SAMPLES PREPARATION
 |
|
Cod: 080103
Standards: TAPPI T833 y T569
Prepares automatically the samples, for the internal bond tests. It allows to prepare the sample for any bond tester, no matters the equipment trade. Automatic procedure of the sample preparation, pressing station and sample cut. This equipment is a substitute of the laboratory cutters and improves the workers security. |
IBP-5M IDM INTERNAL BOND TESTER MANUAL SAMPLES PREPARATION
 |
|
Cod: 080108
Standards: TAPPI T833 y T569
Manual samples preparation, for internal bond tests. . Created from the automatic equipment, allows to prepare the samples for any old equipment, no matter its trade. Manual procedure of the sample preparation and cut. The pressure and time are automatically adjusted. |
GLOBAL STANDARD IGT PRINTING TESTERS
 |
|
Cod: 1601xx
EQUIPMENTS ONLY AVAILABLE FOR THE SPANISH MARKET |
IGT AIC2-5 2000 MULTIFUNCTIONAL PRINTING TESTER
 |
|
Cod. 160116
EQUIPMENT ONLY AVAILABLE FOR THE SPANISH MARKET |
HIGH SPEED INKING UNIT 4 IGT
 |
|
Cod: 160117
EQUIPMENT ONLY AVAILABLE FOR THE SPANISH MARKET |
FRANK TS BRIGHTNESS AND COLOURMETER
 |
|
Cod: 210207
Standards: ISO 2469, 2470, 2471, 3688, TAPPI T519, T525, T527, T 534
Equipment to measure the brightness, colour, fluorescence and opacity in paper. Calibration Standards included. Touch Screen with special program for the paper industry. |
FRANK BRIGHTNESS AND COLOURMETER PC VERSION
 |
|
Cod: 210214
Standards: ISO 2469, 2470, 2471, 3688, TAPPI T519, T525, T527, T 534
Equipment to measure the brightness, colour, fluorescence and opacity in paper. Calibration Standards included. Top table equipment with PC connection. |
PTA LINE AUTOMATIC GLOSS METER (MD & CD)
 |
|
Cod: 210108
Standards: ISO 8254/1, TAPPI T480
Measures the gloss automatically on paper samples. Measures automatically both senses MD (Machine Direction) and CD (Cross Direction), obtaining individual values and the ratio for both. Easy use and complete statistics. This equipment is a part of the PTA line series. |
SST 2500 & 3200 Fibres orientation ULTRASONIC TESTER
 |
|
Cod: 280101
Equipment to obtain the fibres orientation. Includes TSI and TSO calculus. Electronic, easy use equipment. Measurement in 4 seconds by position. Windows Software. It is possible to obtain the equipment with automatic transport of the sheet to obtain the core profiles. |
PTA LINE – SST ULTRASONIC DEVICE FOR FIBRES ORIENTATION
 |
|
Cod: 280103
Equipment to obtain the fibres orientation. Includes TSI and TSO calculus. Electronic, easy use equipment. Measurement in 4 seconds by position. Touch screen, with easy measurement menus. Complete statistics. This equipment is a part of the PTA line series. |
TECHPAP 2D FORMATION TESTER
 |
|
Cod: 210303
The 2D equipment was developed by the CTP paper institute. By means of the digital image analysis, the paper formation is measured. The measurement is made by the paper transmission, making a radiography and obtaining its formation index, size, modules direction average and the flocculus’s distribution. |
PTA LINE 2D FORMATION TESTER
 |
|
Cod: 210306
The 2D equipment was developed by the CTP paper institute. By means of the digital image analysis, the paper formation is measured. The measurement is made by the paper transmission, making a radiography and obtaining its formation index, size, modules direction average and the flocculus’s distribution. This equipment is a part of the PTA line series. |
SIMPATIC LABO” TECHPAP INK DIRT, SPECKLES AND SPOTS DETECTION TESTER
 |
|
Cod: 210301
The Simpatic Labo is a laboratory sensor dedicated to count the dirt, speckles and spots in paper and board. Easy to use and quick measurement and calculation. Based on a software and scanner system. |
TECHPAP “KHEOPS” MOTTLE AND PAPER SUPERFICIAL FINISH ANALYSER
 |
|
Cod: 210302
The Kheops analyser is a laboratory sensor which allows you to accurately evaluate the quality of the paper superficial finish. (the offset impression, mottling and the coating application, the white top, etc.). It also evaluates the printing and specially indicated for the mottled. This equipment allows to test different kind of papers, board, and cardboard. |
TOPO 3D TOPOGRAPHY FOR PAPER
 |
|
Cod: 210304
Equipment to measure the topography in paper . It measures by means of Interferometer. the paper topography can be related to the paper smoothness, coating, and other physic characteristics. It also allows to know the printing qualities. |
TECHPAP “VARIDIM” DIMENSIONAL STABILITY ANALYSER
 |
|
Cod: 050301
The VARIDIM can make different tests to analyse the paper higroexpansive capacity. The system measures constantly the dimensional variations of the 10 tested samples in a climatic chamber with a controlled moisture between 15 and 90%. The systems is PC controlled and can calculate the Young Module. |
TECHPAP “VARIPRESS” CREEPING RESISTANCE ANALYSER
 |
|
Cod: 090302
The VARIPRESS is a creeping resistance analyser in moisture conditions between 15 and 90% and variable moisture cycles. The equipment can measure up to 10 samples at the same time. It can be defined as a Dynamic RCT, exposed to different temperature changes during a certain period of time. |
TECHPAP “VARIMASS” HYGROSORPTION ANALYSER
 |
|
Cod: 090303
The VARIMASS determines the water absorption and water loss in paper under controlled moisture conditions. This equipment is an extension of the VARIDIM equipment. |
LABOR KALANDER CA-2
 |
|
Cod: 300101
Equipment to make kalanders in laboratory, to control the production, research and development. Kalandring can be made in dry or moist, stamped, CB/CF (CA 1) paper control… Temperature, pressure and calendaring speed control. |
CU-2 LABORATORY COATING UNIT
 |
|
Cod: 300104
Equipment to make coating in laboratory, paper sheets, and even paper cores. Drying by IR. Adjustable Doctor blade pneumatically. Coating wide 200, 250 y 300 mm. Equipment totally automatic, with adjustable speed, temperature and drying times. |
PTI LABORATORY SIZE-PRESS
 |
|
Cod: 300107
Equipment to simulate laboratory superficial treatments in paper. Glues or resins application by platens. Wide of the sample up to 300mm. The temperature, speed and applied pressure can be adjusted. Very even results. |
PTI BARS APPLICATOR
 |
|
Cod: 300108
Laboratory equipment to make extensions, with superficial lap, glues, coatings, inks, varnish….. Several bars applicator thickness. Easy use equipment and it is possible to order it with heating. |
TWIN FOLDING TESTER SCHOOPPER FRANK Method
 |
|
Cod: 110102
Standard: ISO 5626 TAPPI 423
Equipment to determine the resistance of a standardized sample of paper, that has been continuously twin folded. |
TWIN FOLDING TESTER LOMARGY IDM Method
 |
|
Cod: 110101
Standard: ISO 5626
Equipment to determine the resistance of a standardized sample of paper, that has been continuously twin folded |
TECHPAP DCT DIAGONAL CURL TESTER
 |
|
Cod: 210305
The DCT equipment is a new development to know the paper or cardboard curl by a laser measurement system. Robust and easy use, working under Windows© system. |
EMTEC PDA DYNAMIC PENETRATION EQUIPMENT
 |
|
Cod: 090401
Equipment to measure the dynamic penetration of several liquids (water, oil, ink) in paper and cardboard. This measuring system is based in ultrasonic and will allow to know the paper behaviour when contacting with liquid from the 8th millisecond. |
EMPTEC PDA-C DYNAMIC PENETRATION FOR COATING
 |
|
Cod: 090402
Equipment to measure the dynamic absorption in coating directly on the support where they are going to be applied. The remaining liquid, sauce, density can be regulated. Sauce cut (1000 at 40 000 s-1). It is possible to control the immobilization time. |
CDA-CDM EMTEC ACCESSORY
 |
|
Cod: 090402
Accessory used with the PDA-C equipment, to de-aerated the coating by means of vacuum technology. |
EMTEC HVL – DYNAMIC PENETRATION EQUIPMENT (High Viscosity)
 |
|
Cod: 090403
Equipment to measure the dynamic absorption in paper against medium and high viscosity liquids, up to 150.000 mPa.s (oil inks, offset inks, glues, varnishes). |
EMTEC PEA DYNAMIC PENETRATION FOR MOTTLING
 |
|
Cod: 090404
Equipment to measure the dynamic penetration in paper over 32 pixels of 1mm2. Allows to obtain a penetration topography on 32 different penetration points. It shows the mottling problems. It can measure with wetting water (with alcohol) |
EMTEC HSA HEAT SHRINKAGE ANALYZER
 |
|
Cod: 090406
Equipment to measure the paper heat shrinkage on one of its sides. The temperature can be regulated up to 230ºC. It measures a shrinkage percentage depending on the paper heating time. |
WET STRECH DYNAMICS ANALYZER WSD 02
 |
|
Cod. 090407
Determining the dynamics of wet expansion of paper by means of one-sided liquid contact with ajustable tihgness. |
PTA-LINE BENDTSEN SMOOTHNESS AND POROSITY TESTER ( DIGITAL )
 |
|
Cod. 170201
Standards: ISO 5636/3, 8791/2 SCAN P21,P60 BS 4 420 TAPPI UM535 DIN 53 108 PAPTAC D15U
Measures the air permeability and surface roughness according to Bendtsen. |
AIR PERMEABILITY TESTER acc. TO GURLEY, AUTOMATED
 |
|
Cod. 170401
Standards: ISO 5 636/5 SCAN P19 TAPPI T460 BS 6 538/3 PAPTAC D14Measures the air permeability of papers and boards according to GURLEY. |
ESPECTRODENSITOMETRO X-RITE DE REFLEXION PARA COLOR MOD. 508X
 |
|
Cod. 210210
Provided with the latest colour control technology through a mechanism designed specially for a basic colour reproduction. |
SPECTROPHOTOMETER ELREPHO DATACOLOR
 |
|
Cod. 210216
Standards: ISO 2469, 2470, 2471, 3688 – DIN 53 140, 53 145, 53 146, 53 147, 54 500 TAPPI T519, T525, T527, T534The Datacolor ELREPHO is a high yield spectrophotometer for paper industry and suitable for a laboratory and production control in colour. |
ESPECTRODENSITOMETRO X-RITE 528X/LP
 |
|
Cod. 210211
Equipped with an spectral engine that provides the capacity to measure density and colour functions. |
REFLECTÓMETRO PARA PAPEL PHOTOVOLT 577
 |
|
Cod. 210201
To determine whiteness and colour of several materials such us paper, board, ceramic etc. |
LIGHT WALL FOR PAPER
Cod. 210309
Light wall mounted on an aluminum frame provided with wheels. Inside,light emitting diodes LED adhesive strips distributed along the entire panel. Clamping system optional mother coil sheet: plungers or hooks.Combinable modules 2200mm in length to accommodate the desiredlength of coil. CE marking. |
เครื่องมือทดสอบสำหรับอุตสาหกรรมกล่องและบรรจุภัณฑ์
FRANK SAMPLES BURST TESTER
 |
|
Cod: 040102
Standards: ISO 13805/3035/13192, TAPPI T818/T808/T809/T811/, AFNOR 23035, DIN, FEFCO…Crush tester with PC incorporated, to make RCT, CMT, ECT… tests. Direct values in Nm are obtained. Complete statistics of the obtained results. |
SAMPLES CRUSH TESTER SC-500 IDM
 |
|
| Cod. 040101
Standard: ISO 13805, 3035, 13192, TAPPI T818, T808, T809, T811, AFNOR 23035, DIN, FEFCO…
Sample Crush Tester to make RCT, CMT, ECT….tests. Digital Display with statistics. RS232 output for PC connection. |
|
FRANK SAW CUTTER FOR ECT
 |
|
Cod: 100105
Standard: DIN-EN-ISO 3037
Saw cutter for sample cuts for ECT tests. Specially designed for double-double and triple boards in high gramages. Suction cleaner incorporated to collect the wreckage produced due to the cut. |
SAMPLES SUPPORT FOR RCT, ECT, CMT, PAT, CCT, CLT… TESTS
 |
|
Cod. xxx
Accessories for samples support for board tests. |
PTI LABORATORY CONCORA MEDIUM FLUTER
 |
|
Cod: 100602
Standards: ISO 7263, DIN-EN-ISO 7263, TAPPI T809, SCAN P27
Vertical equipment to corrugate medium paper samples, for the CMT and CCT tests. Energy optimized equipment |
PTI CONCORA MEDIUM FLUTTER with interchangeable riffle plates
 |
|
Cod: 100605
Standards: ISO 7263, DIN-EN-ISO 7263, TAPPI T809, SCAN P27
New vertical equipment with interchangeable riffle plates A, B y C, for medium paper for CMT and CCT tests. These riffles are easy to change. This new equipment has been developed for the ISO Standard modification design. |
CORRUGATED BOARD MICROMETER
 |
|
Cod: 010105
Standard: ISO 3034 , FEFCO Nº3
Valid for corrugated board up to 25mm thickness. Manual or automatic equipment. Robust and Easy use equipment. |
IDM PUNCTURE TESTER
 |
|
Cod: 060101
Standards: ISO 3036, SCAN P23, ASTM D781, FEFCO Nº5, TAPPI T803, DIN 53142
To obtain the absorbed energy or puncture resistance on corrugated board for packaging. |
IDM DIGITAL MULLEN BURST TESTER EM-50
 |
|
Cod: 020101
Standards: ISO 2759, DIN 53141, TAPPI T403, T807 y T810
Equipment to measure the Mullen burst strength in cardboard. Digital display with complete statistics. Mullen tests in paper can also been done by selecting the paper speeds. |
PTA LINE DIGITAL MULLEN BURST TESTER
 |
|
Cod: 020103
Standards: ISO 2759, DIN 53141, TAPPI T403, T807 y T810
Equipment to determine the burst strength in board. Digital display with complete statistics. |
FRANK SCT SHORT COMPRESSION TESTER
 |
|
Cod: 040103
Standards: ISO 9895, TAPPI T 826, DIN 54518, BS 7325
Equipment to measure the short compression strength SCT for packaging papers. Display with compression curve and complete statistics. |
IDM BOX COMPRESSION TESTERS
 |
|
Cod: 0501xx
Standards: DIN EN 22872, ISO 12048, TAPPI T804, UNE 57163/5, FEFCO Nº50
Box compression tester and other kind of packages, with fixed and oscillate plates, to fulfil all the compression standards. Software program optional to make compression, stacking and cyclic tests. .
600x600x800mm/10KN
600x600x800mm/20KN
600x600x800mm/30KN
600x800x800mm/10KN
600x800x800mm/20KN
600x800x800mm/30KN
800x800x800mm/10KN
800x800x800mm/20KN
800x800x800mm/30KN
800x1000x800mm/10KN
800x1000x800mm/20KN
800x1000x800mm/30KN
1000x1000x1000mm/10KN
1000x1000x1000mm/20KN
1000x1000x1000mm/30KN
For other sizes ask the IDM commercial department |
CORTADORA TIPO BILLERUD PARA ENSAYOS ECT (Edge Crush Test)
NEWTON CARTON TESTER
Cod. 220106
Standards: EN55024:1998, EN 61000-4,2
The Crease Tester System comprises the measuring instrument connected by an Ethernet link to a host PC which is used to set up test parameters and record the results. In normal operation, the resulting torque performance curve is plotted automatically on the PC screen and the results saved to a database for subsquent analysis.
CIRCULAR CUTTER FOR FCT & GRAMAGE
 |
|
Cod: 100204
Standard: DIN EN 23035
Special sample cutter, hand lever operation to make easier the double-double cardboard cut. 3 Thorns attachment to avoid the sample movement |
PNEUMATIC SAMPLE CUTTER
 |
|
Cod: 100206
Pneumatic cutter for paper sheets. Circular cutter of 50 or 100cm². Suitable for frequent cuts and high gramage papers. |
MANUAL SAMPLE CUTTER PRESS for gramage.
 |
|
Cod: 100205
Device to cut samples for the gramage measurement. Manual cut of 100 cm² |
DOUBLE DISC SAMPLE CUTTER
 |
|
Cod: 1003xx
Cutter to obtain paper strips to make tensile, RCT, CCT SCT,…. tests. Strips wide to be chosen (12,7-15-25,4 or 50 mm) |
CDC-15 DOUBLE BLADE SAMPLE CUTTER an SPECIAL DOBLE BLADE SAMPLE CUTTER
 |
|
Cod: 100302 y 100301
Double blade sample cutter to cut paper strips. Wide available 12,7 – 15 – 25 – 25,4 and 50 mm.
The special double blade cutter has been designed to cut paper strips of low gramage (8-30 g/m²). |
MANUAL SAMPLE CUTTER PUNCH
 |
|
Cod: 100307
To cut paper sample strips of 300 x 15 mm to make traction tests or 6 x 0,5 inches, to make RCT, CMT, CCT, etc. tests |
MANUAL PUNCH
 |
|
Cod: 100305
Special Cutter for sample preparation for STIFFNESS AND TEAR tests. |
PTI TT-CUTTER 2000
 |
|
Cod: 100318
Cutter designed to cut samples on the wide side of all the paper roller, placed horizontally on its edge. When making the cut, simultaneously generates a small roller with all the wide of the paper roller to be later tested. It makes paper samples totally clean and without marks |
PTA TOP TABLE CUTTER
 |
|
Cod: 100319
Equipment designed to cut paper strips. At the same time as it cuts, it generates, as the TT 2000 cutter, a paper roller of 300mm wide, to be later on tested. Papers with gramage from 35 to 600 grams / square meters can be cut. |
PNEUMATIC PUNCH
 |
|
Cod: 100320
Special pneumatic punch to cut samples. Different measures available, to make stiffness, tear, etc tests. Maximum cut thickness 4 mm. Gramages from 35 to 1000 grs/m2. |
PNEUMATIC PUNCH FOR BIG SAMPLES.
 |
|
Cod: 100322
Pneumatic punch for big samples as A4. Maximum cut up to 10 sheets. Specially designed to cut paper samples to be tested or paper samples for laboratory or commercial department. |
CORTADORA TT 2000 FRANK-PTI CORTADORA DE MUESTRAS EN BOBINAS
 |
|
Cod.100318
Takes samples directly from reel. |
ELECTRIC CIRCULAR SAMPLE CUTTER 100cm²
Cod. 100217
Equipment with electrical power for paper, board and textile. Sample thickness up to 7mm. It can be used independently because it works with batteries and with cable connection. His standard sample size is 100cm². CE marking.
