Pulp, Paper & Packaging Testing Instruments

Control Company

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments
Control Company

เครื่องมือทดสอบสำหรับห้องปฏิบัติการทั่วไป เช่น เครื่องวัดค่าอุณหภูมิ ความชื้น ความดันบรรยากาศ ระดับการส่องสว่าง เครื่องวัดค่าความเร็วรอบ นาฬิกาจับเวลา เครื่องคิดเลขทางวิทยาศาสตร์ เครื่องมือ อุปกรณ์ทั่วไปสำหรับห้องปฏิบัติการ เป็นต้น บริษัทผู้ผลิตได้รับมาตรฐาน ISO9001 และ ISO17025 เครื่องมือที่สั่งซื้อมีใบรับรอง ISO17025 มาพร้อมกับเครื่อง (ตรวจสอบรายละเอียดสินค้าตามลิงค์ด้านล่าง)

  • Download รายละเอียดเครื่องวัดค่าความดันบรรยากาศ เครื่องวัดค่าความชื้นสัมพัทธ์ (Barometer & Humidity)
  • Download รายละเอียดเครื่องวัดค่าการนำไฟฟ้า และสารสอบเทียบมาตรฐาน (Conductivity Meter & Conductivity Standard)
  • Download รายละเอียดเครื่องวัดค่าอุณหภูมิแบบดิจิตอล (Temperature)
  • Download รายละเอียดเครื่องวัดค่าความเร็วรอบ เครื่องวัดค่าการไหลของลม เครื่องวัดค่าความสว่าง และอื่น ๆ (Tachometer, Aneometer, Sound Meter, Light Meter)
  • Download รายละเอียดนาฬิกาจับเวลา (Timer, Stopwatch, Clock)
  • Download เครื่องมือวัดทั่วไปและอุปกรณ์ (Tool)
เครื่องวัดความเร็วลมและอุณหภูมิ – Anemometers
3650-3652 Traceable? Vane Anemometer Pens Three units provide for airflow/temperature; airflow/temperature/humidity/dew point, and airflow/temperature/humidity/dew point/barometric pressure.
3655 Traceable? Micro-Anemometer/Therm. Ultra compact micro-design is small in size, and big in features
4090 Traceable? Digital Anemometer Shows airflow in ft/min and m/s. Accuracy is 1%. Features include Min/ Max memory; hold function, and 2- or 16- sec. average.
4091Traceable? Digital Anemometer with Therm Measures air velocity/temperature in hoods and outside environments. Displays even slight gas movement in ducts.
4330 Traceable? Hot Wire Anemometer Probe extends in length for greater reach. Eliminates friction error caused by “moving parts” in wind vanes. Computer output.
4331 Traceable? Anemometer/Thermometer Measures air velocity and temperature. Extra-large LCD.
4332 Enviro-Meter? Provides in a single handheld package an anemometer, humidity meter, light meter and two thermometers.
เครื่องวัดค่าความดันบรรยากาศ อุณหภูมิ ความชื้นสัมพัทธ์ – Barometers
1870 Traceable? Digital Barometer Module Altitude adjustment for exact barometric readings. Four-line LCD shows all current readings.
4197,4195 Traceable?Compact Digital Barometer Measures atmospheric pressure, graphically displays the barometric trend, RH and temperature.
4198 Traceable? Hand Held Digital Barometer eatures include altimeter, barometer, thermometer, stopwatch, and weather forecasting.
4199 Traceable? Precision Dial Barometer Dial displays three scales: millibars, millimeters of mercury and inches of mercury.
4245 Traceable? Workstation Digital Barometer Instantly displays, barometric pressure, trend graph, and temperature– Perfect for workstation or desktop.
เครื่องวัดค่าการนำไฟฟ้า และสารสอบเทียบ – Conductivity
4063 Traceable? Conductivity Meter All in one conductivity meter. Temperature, Ohms, mhos, TDS, PPM, On/off Temperature compensation.
4065-4270 Traceable? Conductivity Standards
 16 ounce bottle, compatible with all meters.
4070 Traceable? Conductivity Meter Computer and recorder output. Replatinizing current.
4163 Traceable? Bench Conductivity Meter Computer and recorder output. Replatinizing current.
4167 pH/Conductivity Univ. Flow-Thru Adaptor Universally designed. Constant monitoring.
4168 Traceable? Pure Water Tester Easiest meter to operate. Tests reagent grade water.
4169 Traceable? Dual-Display Conductivity Simultaneously displays conductivity and temperature readings.
4170 Redi-Stor Probe Storage Solution Solution for storing conductivity probes. Insures probes respond instantly.
4172-4271 Traceable?One Shot?Conductivity Sta Eliminates external contamination by performing calibration in a vial.
4360 Expanded Range Conductivity Meter
 Conductivity meter automatically selects the proper range and displays the exact answer without hassles.
4365 Traceable? Cond./TDS/Salinity Meters Three units provide for conductivity; conductivity/total dissolved solids; and salinity.
อุปกรณ์ควบคุมการทำงาน อุปกรณ์ตั้งเวลาปิด-เปิด – Controllers
4130 Traceable? Temperature Controller Automatically turns equipment on/off at set temperatures. Includes a time controller.
4190 Traceable? Humidity Controller Turns equipment on/off at RH set point. Three-button operation is easy and fast.
5010 Traceable? Lab Controller 1568 On/Off switchings. Set countdown On/Off switchings.
5050 Traceable?Timer Switch Controller Program up to 196 switchings per week. Digital display. Battery backup.
5055/56 24-Hour & Traceable? 7-Day Controller Eight outlets. Pins constantly display all time settings. Raise or lower pins to set trip times.
5057-5058 Traceable? Walkaway Controllers Switch equipment on/off instantly with manual override.
5060, 5070 24-Hour/7-Day Controller Easy to use. Set any 15-minute increment or 2-hour increment. Repeats daily or weekly.
5090 Traceable? Outlet Controller 14 Switchings per day, up to 196 switchings per week.
5095 Traceable? Countdown Controller Turns any piece of equipment on or off at the end of a set time. Nicad backup battery.
เครื่องนับจำนวน – Counters
3125 Hand Tally Counter Easy-to-use, four-digit unit records up to 9999. Numbers instantly and automatically return to zero.
3127 Digital Counter Counter reads to 99,999. Water-resistant. ABS plastic case. Tactile click buttons.
3129 Digital Key-Chain Wristband Counter Reads to 99,999 and has a button click for count confirmation and recessed “no accident” reset.
3130-3132 Touch Counter 9999-digit counter. One-touch operation simultaneously counts and makes a mark.
3133 Counter Pen Reads to 99,999 and is a combination marker and digital counter designed for the lab and plant.
เครื่องวัดค่าความชื้นสัมพัทธ์ – Humidity
4082 Traceable? Memory Humidity/Temperature Displays ambient and probe temperatures. Remembers high/low readings. LCD digits are 1/2 inch high.
4080, 4085 Traceable? Hum./Temp./Dew Point Fast response model, displays 0.01% RH and temperature.
4087 Traceable? General Purpose Hygro./Therm. Simply point and read the result. Humidity range of 10.0 to 95.0%.
4088 Traceable? Hygrometer/ Thermometer Self-contained. Requires no adjustment or maintenance.
4093 Traceable? Humidity/Temperature Pen Memory recall, 30-Second response time, 3/4-inch-high display, Humidity/Temperature Pen with memory makes it easy to monitor any location
4094-4096 Traceable? Digital Hum./Temp. Meter Shows the exact air conditions. Memories store min/max readings. Range is 25 to 95% RH.
4154 Traceable? RH/Temp. Monitor w/Alarm Remote humidity and temperature sensor with high/low alarms and min/max memories.
4180, 4181 Traceable? Printing Hygro./Therm. Provides permanent hard-copy results. Answers in less than 10 seconds.
4184 Traceable? Jumbo Hum./Temp. Meter External thermometer probe with a 10-foot cable. Display is updated once per second.
4185, 4385 Traceable? Memory Hygro./Therm. Temperature and relative humidity, 10.0 to 95.0% RH and 0.0 to 199.9°F and –18.0 to 93.0°C.
4186 Dial Hygrometer/Thermometer Provides humidity and temperature readings in an easy-to-read dial format.
4187 Traceable® Humidity /Thermometer Meter Analog Recorder Output. Humidity range is 10.0 to 95.0% RH. 100 hours of continuous readings.
4189 Traceable® Humidity /Thermometer Hygrometer/Thermometer with computer output. Min/Max memories.
4192 Traceable® Humidity-On-A-Card Easy-to-read humidity cards indicate both the current humidity and the maximum humidity attained.
4247 Traceable®Hygro/Therm/Baro/Dew Point Pen Measure temperature, humidity, barometric pressure and dew point in the palm of your hand. At the press of a button, unit recalls minimum/maximum readings.
4332 Enviro-Meter™ Provides in a single handheld package an anemometer, humidity meter, light meter and two thermometers.
4380 Traceable®Hum./Therm. with Remote Sensor Radio-Signal Remote. Read humidity and temperature from 100 feet away. Reads up to three modules.
4392 Traceable®Pocket Dew Point/Hygro./Therm. Shows humidity, dew point, and temperature. Not affected by condensation.
4410 Traceable® Wet-bulb/Hum./Temp. Alarm Shows humidity, dew point, and temperature. Sounds high/low alarms. Provides minimum and maximum memory readings.
เครื่องวัดค่าความสว่างของแสง – Light Meter
3248 Traceable® Pocket Digital Light Meter Bright 1/2-inch-high digits make it an easy to read pocket light meter.
3247 Traceable® Light Meter Pen Designed for intuitive, easy operation by everyone.
3251Traceable® Dual-Range Light Meter Reads both lux and foot-candles. Analog output of 0.1 millivolt per digit.
3252 Traceable® Dual-Display Light Meter Displays lux or foot-candles. Serial RS-232 output. Recalls highest, lowest and average readings.
3253 Traceable® Ultraviolet Light Meter Displays readings in uW/cm2 and mW/cm2. Serial RS-232 output. Recalls highest, lowest and average readings.
เครื่องวัดค่าแรงดันและระดับสุญญากาศระบบเปิด – Manometers
– Manometers
3460-3469 Traceable® Manometer/Vac. Gauge Differential feature permits reading the difference of the pressure or vacuum between two different sources.
แว่นขยาย – Magnifiers
3350-3352 Illuminated Magnifier Magnifiers provide an in-focus and highly defined view of surface details and illuminating uniformly.
3355, 3356 Illuminated Microscope Pocket Microscope magnifies view. Case is chemical- and shock-resistant ABS plastic.
3357 Magnifier Lamp Convenient front handle provides fingertip control to rise, lower, and pivot.
3430-3436 Hands-Free™ Fold-up Magnifiers Perfect focus with zero distortion. Portable with a scale on the base for measuring.
เครื่องวัดค่าความชื้น – Moisture
4310 Traceable® Moisture Meter Displays material, wood, wood product, and paper moisture content 9.0 to 30.0%. Features memory.
เครื่องวัดค่าออกซิเจน – Oxygen Meter
4319 Traceable® Dissolved Oxygen Pen Measure dissolved oxygen pen reads to 100% air saturation in the palm of your hand.
4320 Traceable® Dissolved Oxygen Meter Displays oxygen concentration in air and in solution. RS-232 output.
เครื่องวัดแรงดันและระดับสุญญากาศระบบปิด – Pressure/Vacuum
3165, 3166 Traceable® Pressure/Vacuum Gauge Eight measuring ranges. Use with all gases and liquids compatible with 316 stainless steel.
ปั๊มดูดจ่ายของเหลว- Pumps
3384-3389 Variable-Speed Pump Compact, variable-flow, bi-directional, self-priming peristaltic pumps offer precise flow deliveries. Dial in the flow rates.
3388 Variable-Flow Chemical Transfer Pump Pumps fluids with a viscosity to 200 centipoises. Suction lift is 10 feet wet, 4 inches dry. Reverses for ease in draining.
เครื่องวัดความดังของเสียง – Sound Meter
4335 Sound Level Meter Memory stores the highest reading achieved. Adjustable response time. Three-decibel ranges.
4336 Traceable® Analog Sound Meter Measures in 7 ranges. Low battery checker.
นาฬิกาจับเวลา – Stopwatches
1025 Traceable® 60 Memory Stopwatch 60-memory, stopwatch with countdown. 3-line display.
1030 Traceable® Digital Stopwatch Single-action, time-out, interval-split, and continuous timing. Times to 9 hrs, 59 min, 59 sec, and 99 hundredths.
1031 Traceable® Decimal Stopwatch Single-action, time-out, interval-split, and continuous timing. Times to 19 hours, 59 minutes, 59 seconds, and 99 hundredths.
1034 Traceable® 2-Display Digital Stopwatch Single-action, time-out, interval-split, and continuous timing. Times to 9 hrs, 59 min, 59 sec, and 99 hundredths.
1035 Traceable® Countdown Stopwatch Set by turning a dial. Countdown and alarm timing in increments of 1 min, 5 min, 10 min, up to 45 min.
1037/1044 Traceable® Stopwatch/Chronograph Times to 24 hours. Chronograph. Single-action, time-out, cumulative split, and continuous timing.
1042 Traceable® Waterp./Shockp. Stopwatch Times to 24 hours. Single-action, time-out, cumulative split, and continuous timing. Waterproof to 3 atms.
1043 Traceable® Three-Button Stopwatch Start/stop, time-out, cumulative split, and continuous rollover timing. Time and date.
1045 Traceable® Water-/Shock-Resist Stopwatch Times to 24 hours. Single-action, time-out, cumulative split, continuous timing. Water-/shock resistant.
1047 Traceable® Big-Digit Stop./Chrono. LCD digits 0.4 inches. Single-action, time-out, and cumulative split. Times up to 24 hours.
1048 Traceable® Stopwatch/Repeat Timer Countdown time from 10 hours to 1/10 of a second. Repeat cycle automatically continues until stopped.
1051 Traceable® Jumbo-Digit Stopwatch 1/2-inch high digits. Resolution 1/100 of a second. Chronograph. Water-resistant.
1052 Traceable® 300 Memory All-Function Stop. 300 Memory All-Function Stopwatch, countdown timer, and handy clip. Stopwatch times to 9 hours, 59 minutes, 59 seconds, 99 hundredths.
1221 Traceable® Digital Bench top Timer Digital display is 3/4 inch high. Times up from 0.01 sec. to 9 hrs, 59 min, 59 sec, and 99 hundredths of a sec.
8529 Mechanical Stopwatch Analog 1/10 second stopwatch with metal case.
เครื่องวัดค่าความเร็วรอบ – Tachometers
4059 Traceable® Touchless/Contact Dig. Tacho. 3-seconds response time. Recalls the highest, lowest, and last reading.
4060 Traceable® Digital Laser Tachometer 1-second response time. Recalls the last reading at any time.
4261 Traceable® Tachometer Touch Contact measurements for rotating surfaces
4262 Traceable® Tachometer w/Red LED Pointer Red LED light, touchless handheld point-and-shoot tachometer
เครื่องัดค่าอุณหภูมิแบบดิจิตอล – Thermometers
4000 Traceable® Digital Thermometer The most accurate thermometer. Min/max memory. Data Logger. Resolution of 0.001°.
4003 Traceable® Waterproof Type K Thermometer One of the most technically advanced, fastest-reading, yet easy-to-use thermometers ever designed.
4004 Traceable® Big-Digit Type K Thermometer Easy to read big digits measure over 5/8-inch-high digits are readable from 15 feet away.
4007 Traceable® Memory Wide-Range Thermometer Expansive range of -200 to 1370°C and a backlight for dark areas.
4008 Type-K Surface Probe Stainless-steel with handle, triple purpose
4014 Stainless-Steel Type-K Probe Triple purpose: liquids, air/gas, and semisolids.
4015 Traceable® Total Range Thermometer Complete range from -200 to 1370°C. Updated twice a second.
4021 Micro Probe Micro probe for Cat. No. 4000
4022 Surface Probe Surface probe for Cat. No. 4000.
4023 Air Probe Air probe for Cat. No. 4000.
4025,4026 Traceable® Expanded-Range Therm. Easy to use 3-position switch and 2 probes so you can monitor multiple tests.
4028 Type-K Beaded Probe Fast response, type-K thermocouple. 4 feet long.
4029 Traceable® Dual Channel Thermometer Simultaneously shows 2 separate temperatures from 2 probes or difference between them.
4039, 4339 Traceable® Waterproof Thermometer Waterproof and shockproof
4040 Traceable®Therm./Clock/Humidity Monitor Displays time of day, temperature, and humidity. A.M./P.M. or 24-hour military time.
4042-4344 Traceable® Digital Dial Thermometer Always on thermometer. Large temperature range.
4045 Traceable® Digital Thermometer Probe holder. Settable high/low temperature alarms.
4100-4101 Traceable® Printing Thermometer °F/°C Printing Thermometer provides permanent record, prints time and date
เครื่องตั้งเวลาปลุกเตือน เครื่องจับเวลา นาฬิกาจับเวลา – Timers
1004 Compact Timer Mechanical timer from 1 to 120 minutes. Loud, 5-second ring.
1021 Traceable® Bench Timer Twelve timing channels. Four timing modes. Audible alarm.
1060 Traceable® Pocket Timer Clip it. 60-second buzzer. Three-button operation.
1062 60-Minute Interval Timer Mechanical timer from 0 to 60 minutes.
1092-1093 SX-Timer™ – Quick-Timer™ Wind up, analog timers forever eliminate battery replacements.
1221 Traceable® Digital Bench top Timer Digital display is 3/4 inch high. Times up from 0.01 sec. to 9 hrs, 59 min, 59 sec, and 99 hundredths of a sec.
3260 Traceable® Time and Number Printer Time-stamp and number all your paperwork with electronic precision.
5000 Traceable® Three-Channel Alarm Timer Displays 3 different times simultaneously. Loud decibel for noisy areas and low for quiet areas.
5002 Traceable® Original Lab Timer Program 3 activities from 9 hours, 59 minutes, 59 seconds to 1 second. Distinct alarm.
5004 Traceable® Four-Channel, Big-Digit Timer Can be seen from across the room. High-decibel alarm. Set up to 4 channels.
5005 Eight-Channel Alarm Timer All-purpose, Eight-Channel Alarm Timer with volume control. 100-hour timing capacity.
5006 Traceable® Two-Memory Timer Counts up/down from 23 hours, 59 minutes, 59 seconds. AM/PM or 24-hour format.
5007 Traceable® Lab-Top Timer Large keys and any-angle viewing. Counts down from 24 hrs to 1 sec. Memory is locked until changed.
5008 Traceable® Three-Line Alarm Timer Times simultaneously. Channels may be started individually or concurrently.
5009 Traceable® Big-Foot Timer One inch high LCD digits. Simultaneous programming of 3 different activities from 99 hrs, 59 min, 59 sec to 1 sec.
5011 Traceable® GIANT-DIGIT™ Countdown Timer View giant size digits on your bench timer from across the lab.
5012 Traceable® Multi-colored™ Timer Add color to your lab, 4-Channel Multi-Colored™ Timer, personalize your timer, show your distinct style with customized bold colors—a fresh look for the lab
5014 Extra-Extra-Loud Traceable® Timer One-hundred-decibel alarm. Memories returns to previous countdown time at the touch of a button.
5015 Traceable® Talking Timer Voice periodically reminds you of countdown time remaining to zero. Eliminates looking at the timer.
5020 Traceable® Alarm Timer/Stopwatch Counts down from 100 min. Stopwatch counts up to 60 min and rolls over to zero and continues timing.
5021 Traceable® 100-Hour Alarm Timer/Stop Counts up/down with alarm. Numbered keys 0-9. Counts down from the memory.
5022, 5023 Traceable® Jumbo Timer Simultaneous programming of 2 different activities from 24 hours to 1 second. One-inch high LCD digits.
5025 Traceable® Triple-Display Timer Alarm sounds for 1 min. Memory returns to the previously programmed time.
5026 Traceable® QC Timer Count down and alarm timer combines easy, 3-button operation with giant-size digits.
5027 Traceable® Triple-Purpose Timer 3/4-inch-high digits. Countdown/up, AM/PM or 24-hour format. Full keyboard 0-9 keys.
5028 Traceable® 99M/59S Timer Counts down from 99 minutes in second increments with 3-button ease and big-digit visibility.
5030 Traceable® Memory Timer Countdown from 24 hrs in increments of 1 min. Seconds are displayed the last 10 minutes.
5035 Traceable® Advanced Memory Timer Remembers the last time set, counts down/up, alarms from 24 hrs in increments of 1 sec.
5036 Traceable® Water-Resistant Timer Audible alarm sounds for 1 minute or can be manually turned off.
5037 Traceable® Credit Card Timer Counts down from 99 minutes, 59 seconds with a 1 second resolution.
5040 Traceable® 100-Hour Timer Counts both up and down to 100 hours. Alarm turns off manually or is silenced after 1 minute.
5041 Traceable® Key-Chain Timer 4-digit LCD display. Countdown in min from 20 hrs. Alarm sounds for 60 sec, or may be silenced manually.
5042 Traceable® Fingertip™ Timer Three button operation. Repeat memory. Counts down from 99 minutes, 50 seconds in 1-second increments.
5043 Traceable® Tie Timer 36-inch lanyard. Digits are 0.45” high. Counts down and alarms from 24 hours to 1 second. Memory.
5045 Traceable® Digital Timer Plus Six-digit LCD always shows the time remaining in hours, minutes, and seconds
5046 Traceable® Clip-It Timer Three-button operation. Clip-It Timer counts down, alarms, and functions as a stopwatch.
5047 Traceable® Touch Timer Four-digit display. Count down and alarm from 19 hours, 59 minutes to 1 minute. Two-button operation. Loud-beeping alarm.
5048 Traceable® Multiple Alarm Timer 96 alarms daily. A bar graph shows the time line and arrows show every alarm time set. Time of day.
5122 Traceable® Instant-Recall Memory Timer Ideal timer to dedicate to routinely timed test
5127 Traceable® Double Display Timer Simultaneously program two different activities
5132 Traceable® Nano™ Timer Ultra small design, two channel easy operation, time of day, and 2-1/2 x 2-inch size.
8906 Traceable® LCD Timer Compact timer is a timer, stopwatch and clock
เครื่องมือ อุปกรณ์ที่จำเป็นสำหรับห้องปฏิบัติการ – Tools
3419 Ultrasonic Automatic Measuring Meter Simply point and shoot to measure distance, area, and volume. LCD displays measurement.
3475 Traceable® SpatulaBalance™ Unique spatula both scoops material and instantly displays weight.
ผ้าเช็คเลนส์ เครื่องมือวิทยาศาสตร์ เครื่องแก้วแบบไม่มีขุย – Wipes
2050 Certified Cheesecloth Wipes Reagent-grade quality. Excellent filtering material. Lint-free.
2060-2065 Clean-Wipes Individually dispensed wipes are handy and ready for instant use. Lint-free. New universal clean-up tool.
2067 Optik-Wipes Works for non-reflective and UV-resistant coated glasses. Prevents fogging. Nonwoven cloth is premoistened.
เครื่องวัดสภาพอากาศ – Weather Station
4250 Wireless Weather Station Temp, RH, dew point, barometric pressure/pressure trend, weather forecast, wind direction/speed, wind chill and more.
เครื่องวัดค่าความดันบรรยากาศ อุณหภูมิ และความชื้นแบบดิจิตอล
เครื่องวัดค่าความสว่างของแสง (Digital Light
Meter)
เครื่องวัดระดับความดังของเสียง (Digital
Sound Level Meter)
เครื่องวัดอุณหภูมิแบบดิจิตอล (Digital Thermometer
with Built-in Printer)
เครื่องวัดอุณหภูมิแบบดิจิตอลโดยใช้แสงอินฟาเรด
(Infrared Digital Thermometer)
นาฬิกาจับเวลาพร้อมใบรับรองการสอบเทียบ (Timer)
เครื่องวัดค่าความเร็วรอบแบบสัมผัส (Contact
Tachometer)
เครื่องวัดค่าความเร็วรอบแบบสัมผัสและแบบใช้แสง
(Contact / Non-Contact Tachometer)
เครื่องวัดค่าความชื้นสัมพัทธ์และอุณหภูมิแบบดิจิตอล
(Digital Humidity / Temperature Meter)
เครื่องวัดค่าความชื้นแบบอัตโนมัติ (Digital
Moisture Meter)
เครื่องวัดระยะแบบละเอียด (Digital Vernier)
เครื่องวัดค่าอุณหภูมิห้อง ความชื้น แสงสว่าง และอุณหภูมิตัวอย่างแบบอัตโนมัติ (Digital EnviroMeter)
ปั๊มสำหรับดูดจ่ายสารเคมี (Chemical Dosing Pump)

CRS ChemRe

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Petroleum & Petrochemical Testing Instruments, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments
CRS ChemRe

ผู้ผลิตเครื่องมือทดสอบถังปฏิกรณ์ความดันสูงสำหรับงานวิจัยและพัฒนาผลิตภัณฑ์ทางด้านวิทยาศาสตร์ วิศวะเคมี ปิโตรเลียม ปิโตรเคมี พลาสติค โพลีเมอร์ อุตสาหกรรมยาและเครื่องสำอาง อุตสาหกรรมอาหาร เช่น ถังสกัดสารความดันสูง (High Pressure Reactor) ปั๊มของเหลวแรงดันสูง อุปกรณ์วาล์วและท่อความดันสูง (High Pressure Valve & Tubing) เครื่องสกัดสารแบบท่อ (Tubular Reactor System) เครื่องสกัดสารสำคัญด้วยคาร์บอนไดออกไซด์แบบยิ่งยวด (Supercritical Fluid Extraction : SFE-CO2 ), เครื่องสกัดสารด้วยน้ำแบบยิ่งยวด (Supercritical Fluid Extraction : SFE-H2O) การทำลาย-ฆ่าเชื้อผลิตภัณฑ์อาหารด้วยความดันสูง (CIP&FIP) การทำผงผลิตภัณฑ์ยาและเครื่องสำอาง (SFE-SAS) การทำครีมผลิตภัณฑ์ยาและเครื่องสำอาง (SFE-RESS) เครื่องสกัดสารอนินทรีย์จากพลาสติคด้วยความดันสูง (High Pressure Reactor) เครื่องศึกษาประสิทธิภาพของตัวเร่งปฏิกิริยา (Catalyst Reactor) เป็นต้น

– Tubular Oven Type Catatest Reactor
– High Pressure Stirring Reactor (Glass / Metal)
– pH Controlled Reactor System with Stirring
– Supercritical Water Oxidation System (SCWO)
– Supercritical Fluid Dryer (SFD)
– Oven Type Supercritical Fluid Extraction (SFE)
– Cold Isostatic Pressure Reactor System (CIP)
– Food Isostatic Pressure Reactor System (FIP)

ตัวอย่างการใช้งาน (Applications)
Polymerization, Hydrogenation, Dehydrogenation, Oxidation, Amination, Distillation, Organic Synthesis, Catalytic Reaction, Isomerization, Poly-Silicon CVD, Poly-Silicon FBR, Bio- Polymerization, Gasification, Fuel Cell, Supercritical Extraction, Subcritical Extraction, Catalytic Combustor, GTL Process, CTL process, Coal Slag Tester, CO2 Dry & Cleaning, DME Process, etc.

R-201 Series Reactor System
General Specifications
– The vessel of R-201 Series Reactor is metal.
– General Max. Pressure : 414 Bar (6000 psig)
– General Max. Temperature : 500℃
– General Capacity: 100ml~500L
– R-201 & 211 Series Reactors are designed to select between the metal vessel & glass vessel.
And these are designed to move vessel by pressure cylinder easily.

 

Order Guide
Series Volum ID Conn.Size Stand Heater Max.
Pressue		 Magnetic
Drive		 Motor
201-1 100mL 50mm 1/8″NPT Bench 0.5Kw 6000psig 16in-lbs 60W
201-2 300mL 55mm 1/8″NPT Bench 1.0Kw 6000psig 16in-lbs 1/12Hp
201-3 500mL 65mm 1/8″NPT Bench 1.0Kw 6000psig 16in-lbs 1/8Hp
201-4 1L 94mm 1/8″NPT Bench 1.5Kw 6000psig 16in-lbs 1/4Hp
201-5 2L 107mm 1/8″NPT Bench 2.5Kw 6000psig 16in-lbs 1/4Hp
201-6 5L 145mm 3/8″NPT Floor 3.5Kw 6000psig 32in-lbs 1/3Hp
201-7 10L 210mm 3/8″NPT Floor 8.0Kw 6000psig 64in-lbs 3/4Hp
201-8 Other
Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-211 Series Glass Reactor System
General Specifications
– The vessel of R-211 Series Glass Reactor is glass.
– General Max. Pressure : 14 Bar (220 psig)
– General Max. Temperature : -30~250℃
– Capacity: 100ml~100L
– R-201 & 211 Series Reactors are designed to select between the metal vessel & glass vessel.
And these are designed to move vessel by pressure cylinder easily.

Order Guide
Series Volum ID Conn.Size Staand Heater Max.
Pressue		 Msg.Drive Motor
211-1 300mL 55mm 1/8″NPT Bench 1.0Kw 220psig 16in-lbs 1/12Hp
211-2 500mL 65mm 1/8″NPT Bench 1.0Kw 220psig 16in-lbs 1/8Hp
211-3 1L 86mm 1/4″NPT Bench 1.5Kw 220psig 16in-lbs 1/4Hp
211-4 2L 107mm 1/4″NPT Bench 2.5Kw 150psig 16in-lbs 1/4Hp
211-5 5L 140mm 3/8″NPT Floor 3.5Kw 100psig 32in-lbs 1/2Hp
211-6 8L 160mm 3/8″NPT Floor 7.5Kw 100psig 64in-lbs 1/2Hp
211-7 10L 210mm 3/8″NPT Floor 8.0Kw 50psig 64in-lbs 3/4Hp
211-8 Other
Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-202 Series Oven type Reactor System
 Features
Easy to make temperature uniform without effect on
Easy to open & close the cover from the vessel because of pin
Easy to move the vessel by lifting in the oven
 General Specification
 Pressure Vessel
  · Material ( 316SS, Hastelloy C- 276, Ti, inconel, etc.)
  · Capacity : 100ml~2L
  · Design Max. temperature: 300’C
  · Design Max. Pressure: 5000psig

 V.F.T.
  · Valve , fitting, tubing

  Cover
· Gas Inlet nozzle & Valve
  · Gas Outlet nozzle & Valve
  · Sample nozzle & Valve
  · Cooling coil inlet & Outlet
  · Thermowell
  · Pressure equipmet nozzle
  · Pressure equipmet nozzle
 Structure
  · Oven Type skid
  · Lifing cylinder
  Heater
· Electric Band Heater
  · Ceramic
 Magnetic Drive
  · 16, 32 In- Ibs
  · Outter & Inner Magnetic
  · DC Motor ( 60W, 90W, 1/8HP , 1/4HP, Etc.)
  · RPM ( 0~3000 rpm)		  Control Box System
  · Digital manual & software control box
  · Touch screen ( option)
 Order Guide
Capacity Material Pressure(bar) Temp.(℃) Viscocity(CP)
100ml~500ml ① 316SS ① 1~10 ① 0~100 ① Below 10,000 ①
500ml~1L ② hastelloy ② 10~100 ② 100~200 ② 10,000~50,000 ②
1L~2L ③ Titanium ③ 100~200 ③ 200~300 ③ above 50,000 ③

* Please select above numbers. ex) C①M②P①T①V①
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-301 Series Catatest Reactor System
 Use of catatest
– Determinations of different variables for researching on Catalyst improvement, such as; Reacting Temperature, Pressure and Feed Flow, reaction temperature, Pressure, Feed flow, reaction kinetics, etc
– Test of Catalyst on Hydrogen reaction
– Catalyst Screen, Selectivity & Activity Test
– Test of Catalyst Life Span
 General Specification
– Catalyst volume (5mL~2L) : 316SS & Hastelloy C276
– Reactor Design Pressure : 1,000psig~6,000psig
– Reactor Design Temperature : 800℃
– Operating Temperature : 650℃
– Operating Pressure : 1200psig
– Liquide Flow rang : 20mL/min~100L/min
– Gas flow range:
⇒ H2 gas : 50mL/min~3L/min
⇒ O2 gas : 50mL/min~3L/min
⇒ N2 gas : 50mL/min~500mL/min
⇒ Feed&Spare gas : 50mL/min~500mL/min
 Order Guide
301 A B C D E F
Series Net Volume Pressure Temp. Power Control System MFC
301 1. 8ml 1. 300psig 1. 300℃ 1. 220/60/1 1. Local Controllers 1. MFC(1)
2. 12ml 2. 500psig 2. 400℃ 2. 220/60/3 2. Local Controllers &
R-SCS SW(PC)		 2. MFC(2)
3. 20ml 3. 1000psig 3. 500℃ 3. 220/50/1 3. DAQ System
(Only PC version)		 3. MFC(3)
4. 20ml 4. 2000psig 4. 600℃ 4. Other 4. Other 4. MFC(4)
5. 20ml 5. 3000psig 5. 800℃ 5. MFC(5)
6. 20ml 6. 5000psig 6. 1000℃ 6. Other
7. Other 7. Other 7. Other
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-302 Series Compact Catatest Reactor System
 Features
Compact design of the complete system for easy installation and also easy transport by wheel.
 Oventype Skid
Oven system surround reaction zone can keep the even test without any effect from any change of circumstance. Also, it can of reactor can keep even temperature of oven circumstance.
 General Specification
 REACTOR : 5 ~ 500mL
  · MAX TEMP. : 800℃
  · MAX PRESS. : 6000PSIG
  · INCONEL, HASTELLOY, ETC		  HEATER : CERAMIC FIBER HEATER
  · ZONE : 2 ~ 5 ZONE.
  · MAX TEMP. : 1000℃		  MFC : BRONKHORST,BROOKS, LINE-TECH,ETC.
  · ACCURACY : ± 1%
  · SIGNAL : 0~5VDC OR 4~20mA
 BPR: TESCOM, SWAGELOK, ETC.
  · PRESS. RANGE : 0~10,000PSIG
* OPTIONAL : ER-3000 SERIES		  SEPERATOR : 316SS, ETC
  · TEMP. : 0 ~ 200℃
  · PRESS. : 0 ~ 3000PSIG
* OPTIONAL : LEVEL
  · SWITCH & PNEUMATIC
  · VALVE (AUTO SYSTEM)		  CONDENSER : 316SS, ETC
  · TYPE : JACKET, SHELL & TUBE TYPE, ETC.
  · TEMP. : 0 ~ 250℃
  · PRESS. : 0 ~ 6000PSIG

 

 Order Guide
302 A B C D E F G
Series Net Volume Pressure Temp. Material Power Control System Gas/Liquid
302 1. 8ml 1. 300psig 1. 300℃ 1. 304SS 1. 220/60/1 1. Local Controllers 1. MFC-Gas
– 1. Gas
– 2. Flow
2. 12ml 2. 500psig 2. 400℃ 2. 316SS 2. 220/60/3 2. Local Controllers &
R-SCS SW(PC)
3. 20ml 3. 1000psig 3. 500℃ 3. Hac-C 3. 220/50/1 3. DAQ System
(Only PC version)		 2. MFC-Liq.
– 1. Liquid
– 2. Flow
4. 100ml 4. 2000psig 4. 600℃ 4. Inconel 4. Other 4. Other
5. 300ml 5. 3000psig 5. 800℃ 5. Other 3. Pump-Liq.
6. 500ml 6. 5000psig 6. 1000℃ 4. Other
7. Other 7. Other 7. Other
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-401 Series Supercritical Fluid Extraction System & SCWO
 Features
– SFE&SCWO can be selected according to its purpose lf use
– Supercritical Fluid Extractions and Reaction’ Capacity, Pressure. Temperature, etc, are all optional selections available
– As for Capacity, it is standard from 20mL up to 2L, and when it should be an optional selections available.
– Designing is available from 20mL up to 500mL for 10,000psig, 5,000psig when 1Liter and 2Liters.
 General Specification
– Capacity : 50mL~10L
– Design Pressure : 10,000psig
– Design Temperature : 0~500℃
– Materials : 316SS, Hastelloy C-276
– Heater Capacity : 0.5~5Kw
– Support Stand : Floor Stand
– “K”Type Thermocouple & Thermowell
– Pressure Gauge & Pressure Transmiter (0~10,000psig)
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-401 Series Supercritical Fluid Extraction System & SCWO
 Features
– SFE&SCWO can be selected according to its purpose lf use
– Supercritical Fluid Extractions and Reaction’ Capacity, Pressure. Temperature, etc, are all optional selections available
– As for Capacity, it is standard from 20mL up to 2L, and when it should be an optional selections available.
– Designing is available from 20mL up to 500mL for 10,000psig, 5,000psig when 1Liter and 2Liters.
 General Specification
– Capacity : 50mL~10L
– Design Pressure : 10,000psig
– Design Temperature : 0~500℃
– Materials : 316SS, Hastelloy C-276
– Heater Capacity : 0.5~5Kw
– Support Stand : Floor Stand
– “K”Type Thermocouple & Thermowell
– Pressure Gauge & Pressure Transmiter (0~10,000psig)
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-402 Compact Supercritical Fluid Extractor System
 Features
– Without the effect on surrounding temperature users can make the temperature uniform.
– Users can gain the extract from the extractor more easily than system.
– Users can open & close the cover from the vessel because of pin type.
– Users can move the extractor by lifing in the oven easily.
 General Specification
 Extractor
  · Material : 316SS, hastelloy C-276, Ti ,inconel, etc.
  · Capacity : 50ml~ 1.5L
  · Design Max. temperature : 250℃
  · Design Max. pressure : 10,000 psig		  Condenser
  · coil type
  · insert into the chiller		  Seperator
  · Capacity : 50ml~ 10Liter
  · Material : 316SS
 Cover
  · gas inlet nozzle & valve
  · gas outlet nozzle & valve
  · thermowell
  · pressure equipments nozzel
  · etc.		  Receiver tank
  · Capacity : 50ml~ 10Liter
  · Material : 316SS		  Pump
  · Design Pressure : 1~10,000 psig
  · Material : 316SS
  · Connection : 1/4″~1/8″
 Heater
  · electric band heater		  Chiller
  · Bath capacity : 6~30 Liter
  · Temperature range : -20~100℃		  
 Order Guide
302 A B C D E G
Series Capacity Pressure Temp. Material Power Control System
402 1. 50ml 1. 300psig 1. 100℃ 1. 304SS 1. 220/60/1 1. Local Controllers
2. 100ml 2. 500psig 2. 200℃ 2. 316SS 2. 220/60/3 2. Local Controllers &
R-SCS SW(PC)
3. 500ml 3. 1000psig 3. 250℃ 3. HC-276 3. 220/50/1 3. DAQ System
(Only PC version)
4. 1000ml 4. 2000psig 4. Inconel 4. Other 4. Other
5. 1500ml 5. 3000psig 5. Other
6. Other 6. 5000psig
7. 10,000psig
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

 

R-501 Series the Automation System
 Features
– Temperature monitoring & PID control
– Pressure monitoring
– Pressure Control(option)
– Agitating Speed Monitoring & PID Control
– pH Monitoring
– ISE Monitoring(Options)
– pH Control(Options)
– Conductivity Monitoring(Options)
– DO Monitoring(Options)
– COD Monitoring(Options)
– ORP Monitoring(Options)
– Safety : Overtemp & Overpressure monitoring & Shutoff function
– Programmable Temperature Control(Options)
– R-SCS S/W
– Wave Form Chart : Auto Scale Date (Time vs. Scope, Sweep Chart), Format & precision Control Mapping mode (Linear or log axis), Zoom in Rectangular
– Elapsed Time (HH:MM:SS) : Shows Entire Elapsed time.
– Reaction Time (HH:MM:SS) : Shwos Date Saving.
– Support Korean version of File Name.
– Saving Data with ASCII Format
 Please contact to us for other temperature, pressure and capacity besides above standard specification.

 

Software Program
 All systems can be remotely controlled by the Software Program.

Filtertechnik

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Can, Aerosol Can, Glass Bottle, PET Bottle, Testing, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Petroleum & Petrochemical Testing Instruments, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments
Filtertechnik

Filtertechnik Ltd. เป็นบริษัทผู้ผลิตเครื่องทดสอบ เครื่องนับจำนวนและวัดขนาดอนุภาคของน้ำมัน (Particle Counter) เครื่องวัดระดับความสะอาดของน้ำมัน (ISO Cleanliness Class) ตามมาตรฐาน ISO4406, SAE AS4059 & NAS 1638 เครื่องกรองน้ำมันหล่อลื่น เครื่องศึกษาประสิทธิภาพในการกรองน้ำมัน เครื่องประเมินอายุการใช้งานของน้ำมัน (Oil Life Condition / Oil Condition Monitoring) การใช้งานเหมาะสำหรับการทดสอบน้ำมันหล่อลื่น (New Oil, In-Service Oil, Used Oil) น้ำมันไฮโดรลิก น้ำมันเบรก น้ำมันสังเคราะห์ น้ำมันดีเซล น้ำมันเครื่องบิน น้ำมันเชื้อเพลิง ตัวทำละลาย สารเคมี และของเหลวอื่น ๆ มีให้เลือกทั้งแบบทดสอบนอกสถานที่ (Portable Particle Counter) แบบตั้งโต๊ะสำหรับห้องปฏิบัติการ (Laboratory Particle Counter) และแบบทดสอบต่อเนื่อง (Online Particle Counter) ตัวเครื่องทดสอบแบ่งออกเป็นสองประเภทตามลักษณะของเซ็นเซอร์ที่เลือกใช้ ได้แก่ Laser Particle Counting / หลักการการบังแสงหรือดูเงาการตกกระทบของอนถภาค และ Digital Imaging Particle Counting / หลักการวิเคราะห์ด้วยภาพดิจิตอลที่พัฒนามาเป็นพิเศษสำหรับตัวอย่างที่มีปัญหาการปนของฟองอากาศ ทำให้ไม่สามารถวัดค่าขนาดและนับจำนวนได้ถูกต้อง นอกจากนี้มีระบบจดจำรูปร่างของอนุภาคโลหะที่เกิดจากการสึกหรอระหว่างการใช้งาน เช่น Fatigue Wear, Sliding Wear, Cutting Wear, Fibres เป็นต้น และสามารถต่อเข้ากับเซ็นเซอร์เพื่อวัดปริมาณความชื้นสัมพัทธ์ในหน่วย %RH (ในกรณีที่ใช้วัดน้ำมันหล่อลื่น) และค่าความชื้นในหน่วย PPM (ในกรณ๊ที่วัดน้ำมันดีเซล)

OIL CONDITION MONITORING

Particle Pal range comparison

Particle Pal Range Comparison

Laser particle counters

Laser Particle Counters

Digital imaging Particle Counters

Digital Imaging Particle Counters

Moisture sensors

Moisture Sensors


Particle Pal Range

With 25 years’ worth of expertise and innovation, our multiple award-winning Particle Pal products are modular designs utilising a wide range of sensors to suit individual testing requirements.
Filtertechnik offer two particle counting options: Laser Counters or Digital Imaging, which is a more advanced particle counting technology with a wide range of benefits (see more below).
There are currently 16 product variations, use our selection guide below to refine your search in order to find the best Particle Pal for your application.

Particle Pal Pro: V3

Our Particle Pal Pro range, harnesses advanced digital imaging particle counting technology and offers a broader micron range up to 70 microns. The powerful CMOS camera can recognise the shape of each particle, which then categorises it into either fatigue, sliding or cutting wear to help pinpoint root causes of system failure. Along with ground-breaking air bubble detection/elimination, there is also the ability to handle higher viscosities up to 2,400cSt. Digital Imaging is not affected by oil additives.  Add other sensors such as Water Sensing, Oil Life determination and Viscosity to give incredible insight into the condition of your oil or diesel fuel.

The Pro Range also prides itself on an onboard asset management tool, which is pre-installed on each Pro model as standard. The Asset tool allows users to trend, analyse and interoperate data like never before. Learn all about it in the short video on this page.

Particle Pal Plus: V4

The latest addition to the family: the all-new Particle Pal Plus. The Particle Pal Plus incorporates all the benefits of digital imaging particle counting into a compact case, offering a low-cost alternative to Pro. Full-spectrum ISO counts, bubble elimination plus ISO counts are not being affected by phantom particles/oil additives, which is a known issue with laser technology.

Particle Pal Plus is modular and can be built with an array of different sensors for a deep insight into oil and fuel health. Two pump variations are available, a standard gear pump that can be used on viscosities up to 320cSt or the high viscosity version (HV) up to 2,400cSt.

Digital Imaging Particle Counter

Particle Pal Pro

Particle Pal Pro - Digital Imaging Portable Particle Counter

Particle Pal Pro

Particle Pal Pro + Water Sensor - Digital Imaging Portable Particle Counter

FS9V4

Particle Pal Plus: Digital Imaging Portable Particle Counter

FS9V4-RH

Particle Pal Plus + Water RH%: Digital Imaging Portable Particle Counter

FS9V4-PPM

Particle Pal Plus + Water PPM: Digital Imaging Portable Particle Counter

FS9V4-PPM-DEN

Particle Pal Plus + Water PPM and Density Sensor: Digital Imaging Portable Particle Counter

FS9V4

Particle Pal Plus High Viscosity: Digital Imaging Portable Particle Counter

FS9V4-RH-HV

Particle Pal Plus High Viscosity + Water RH%: Digital Imaging Portable Particle Counter

fs9v4-rh-v-d-hv

Particle Pal Plus High Viscosity: Particulate, Water RH%, Viscosity and Density

Particle Pal Pro

Particle Pal Pro: Life - Digital Imaging Portable Particle Counter: Including water and remaining oil life sensor

Particle Pal Pro

Particle Pal Pro + Viscosity - Digital Imaging Portable Particle Counter

Laser Particle Counters

Particle Pal - Laser Portable Particle Counter

Particle Pal + Water & Density Sensor - Laser Portable Particle Counter

Particle Pal: Life - Laser Portable Particle Counter: Including water and remaining oil life sensor


Understanding Phantom Particle Counts

Understanding Phantom Particle Counts

Filtertechnik have developed a portfolio of products for accurate real-time monitoring of Particulate, Water Content and Remaining Life for Oil and diesel fuels.  We offer 2 particle counting approaches, new Digital Imaging technology and more traditional Laser Particle counters.

S120 Digital Imaging Particle Counter

The S120 Digital Imaging Particle Counter is a huge step forwards in accurate determination of oil and diesel fuel Particle counting using revolutionary new digital imaging and advanced algorithyms to analyse particles on the fly. A wider particulate size categorisation (4, 6, 14, 21, 38, 70 and >100 microns are counted and categorised) as well as shape recognition sorting particles 20 microns and above into; Sliding, Cutting and Fatigue Wear.  An additional major feature is bubble recognition and elimination from ISO counts. 


Filtertechnik have conducted extensive testing of both Digital Imaging and Laser counting when Siloxane based anti-foaming additives are present in mineral oil, especially polydimethylsiloxane, a common additive to hydraulic oils. This additive causes phantom particle counts with laser counters but not with digital imaging. For more information on this phenomenon please click here.

Particle Pal Pro

Particle Pal Pro
Utilising Digital Imaging

S120 - Digital Imaging Particle Counter

S120 Digital Imaging Particle Counter
Get a deeper insight into oil health

The revolutionary new Digital Imaging particle counting technique gives unprecedented insight into the type and quantity of contamination in any given oil or diesel fuel sample. ISO/NAS/SAE counts as well as a broader micron range, shape recognition, bubble elimination and the ability to handle higher viscosities.

This breakthrough technology uses advanced algorithms to calculate the size and shape of particulate on images taken at between 2 & 4 frames/second. The technology also gives root cause shape recognition to the particulate in live systems or bottle samples of any oil. Special algorithms and AI analyse images on the fly with a resolution of 2 microns up to several hundred microns.  High-resolution images are saved for further analysis and reporting such as the one above.

Particles are counted and categorised into Fatigue, Sliding or Cutting Wear. Air Bubbles and Water Droplets are counted and then eliminated from the counts making this suitable for live testing or permanent installation on systems where air is present such as large gearboxes.  In addition, anti-foaming additives such as polydimethylsiloxane are not counted as particles by digital imaging, this is a major advantage over Laser Particle counters which see's the micelle-like formations created by this additive as contamination, these are phantom particles, often resulting in particle counts being raised by 2 to 3 ISO codes, especially the 4 and 6 micron channels. Filtertechnik supply the S120 counter as a stand-alone particle counter for integration into live systems for 24/7 monitoring. Alternatively, we have developed a range of portable oil analysis cases designed to give on the spot oil analysis and a deep understanding of the type and quantity of contamination in any given oil sample. Built-in software takes readings from the new digital imaging technology and presents Engineers with an easy to understand analysis including images of contamination in the oil sample.

 

MOISTURE SENSORS

Water monitor sensor

RH Water monitor sensor and display

WMS500 Water monitor - PPM

Water Measurement Sensor WMS500 for Genuine PPM

Filtertechnik offer two types of water sensors for determining the quantity of water in oils, fuels and biofuels; our RH sensors and our WMS500 PPM sensors

RH Water Monitor: Our RH (Relative Humidity) water monitor gives the percent saturation of a given fluid. 100% saturation is the point at which suspended water becomes harmful free water. These sensors are lower cost and are very useful for hydraulic applications. Outputs are scaled and 4-20mA.

WMS500 PPM Sensor: Our Genuine PPM sensors are highly accurate parts per million (PPM) sensors and are particularly useful for transformer oils and diesel fuels or biofuel. The sensors are calibrated to a Karl Fischer device and fully temperature compensated.

To understand the different relationships between %RH and PPM please see below:

Parts per million (ppm)
:

Our PPM sensor gives a count of the absorbed water up to the saturation point of a given oil or fuel. Beyond the saturation point the sensor 'locks out' as free water will have formed.

Relative humidity: 


Relative Humidity or RH is expressed as a percentage. 100% RH equates to the maximum amount a given oil or fuel can hold (absorbed water) before it becomes saturated and free water forms.

To view all our quality control and instrumentation click here

 

UNDERSTANDING PHANTOM PARTICLE COUNTS

The increased use of siloxane based anti-foaming agents is causing issues with laser counter technology.

IMAGINE THIS: You have been filtering 150 litres of hydraulic fluid off-line with staged 5 and 1 micron filter elements at a rate of 25 litres per minute (1,500 litres per hour). You have been using a laser light-blockage method (LBM), automatic particle counter to verify the fluid cleanliness. The starting cleanliness per ISO 4406:2017 was 25/22/15. After eight hours, the cleanliness has only dropped to 22/20/13. You’ve checked that the filter element is not clogged and not in bypass. You even went through the trouble of making sure there was an element actually in the filter. How is this possible? What you’re likely experiencing is a classic case of “phantom” particle counting.

Demystifying phantom particle counts

Phantom particle counting is a documented problem, encountered when using laser-based LBM particle counters to verify the cleanliness of mineral based fluids containing certain insoluble additives. Silicone-based antifoam agents such as polydimethylsiloxane are common additives causing problems. Fluids used in mobile fluid power systems are typically formulated to contain high antifoam concentrations. Research has suggested that through differential surface tension, the silicone-based antifoam additive agents adhere to the inner wall of microscopic, entrained air bubbles, resulting in micelle-like encapsulations of the additive agents that then take on the apparent shape characteristics of a water droplet. The micelle-like antifoam agent encapsulations typically range in 4-10µm in size. Once the encapsulations rise to the fluid surface, the agents quickly pierce the air bubble and return back into the fluid. In a related study on the effects of a variety of nonsolid contaminants and additives on LBM particle-counting accuracy, it was found that a base stock mixture containing 0.02% (by weight) of a silicone antifoam agent increased the particle count by a minimum factor of three. The erroneous particle accounts were particularly evident in the 4µm and 6µm channels of the ISO 4406 cleanliness standard.

Limitations of Laser particle counts

Light blocking method (LBM) Laser particle counters are useful in many applications and the principle of the method is fundamentally simple. Fluid flows through a measurement cell containing a light source on one side and a receiver (photodetector) on the opposite side. The light source becomes partially blocked as particles pass through the measurement cell, creating a light radiation differential (a shadow) – corresponding to the circular cross-sectional size of the passing particles. Because of this fundamental operating principle, LBM particle counters suffer from a key drawback: the inability to discern solid contaminants from other contaminants such as water, air bubbles, phantom particles, and so on. So, how can the phantom particles be overcome using automatic particle-counting technology? There is an alternative solution.

Digital imaging particle counting

Digital imaging particle counting uses size and shape-recognition technology, based on advanced algorithms to distinguish contaminants. For example, a direct imaging particle counter can distinguish contaminants into fatigue, cutting and sliding wear, as well as fibre and air bubble categories based on shape characteristics. It can also recognize water droplets (though water droplets are typically not recorded). The distinction of contaminants allows for more accurate particle counting, by negating nonsolid particles like entrained air bubbles and water droplets.

The S120 digital imaging particle counter can recognise solid particles and summarize them into 4, 6, 14, 21, 38, 70 and >100 micron ranges. It can also recognise shapes and give individual shape recognition counts as sliding, cutting and fatigue wear particles. Bubbles are also recognised and removed from the counts.

Therefore, digital imaging particle counting technology can negate the micelle-like antifoaming additive encapsulations as water droplets – phantom particles – allowing users to understand the condition of their fluids with confidence. Various real-world case studies demonstrate how the Particle Pal Pro a fluid condition monitoring solution with digital imaging particle counting technology, can overcome phantom particle counting.

Laser vs digital imaging particle counter test

In a lab-based test conducted on base oil with no additives, Filtertechnik ran 2 particle counters feeding from the same oil warmed to 40°C. - a laser counter and digital imaging particle counter. Filtertechnik then dosed in exactly 100ppm polydimethylsiloxane anti foaming additive. The results were immediately apparent in the laser counter, affecting the 4 and 6 micron counts by up to 3 ISO codes, the 14 micron count slightly less so, but still an increase of 1 ISO code. The digital imaging counter remained unaffected by the additive.

 

CASE STUDY

An OEM of large off-highway equipment was experiencing continuous particle counter inaccuracies at a verification stage of assembly. The rejections due to fluid condition were mounting, causing delayed shipments and significant related costs. The average holding time delay due to rejection was seven days, which incurred a holding cost of £1,000-a-day per unit. At the consultation phase of the case study, eight units had been delayed.

The diagnosis was in: the existing laser light-blockage-type particle counters were providing inconsistently high and erroneous particle counts. The ISO 4406 cleanliness would frequently measure 23/22/19, despite a strong fluid-maintenance and conditioning regime. Third-party fluid analysis reports and fluid datasheets suggested that the synthetic hydraulic fluid contained a high concentration of a siloxane (silicone derivative) antifoaming additive, known to cause phantom particle measurements in LBM automatic particle counters.

Filtertechnik provided an extensive on-site demonstration that proved the advanced digital imaging technology of the Particle Pal Pro portable fluid contamination monitoring solution, which measured an average ISO fluid cleanliness of 15/14/10. This allowed the customer to successfully process the fluid and pass six units during the first day of demonstration. The two remaining backlogged units passed early on the second day of demonstration. The savings evidenced by the demonstration equated to approximately 35% in cost savings and an 81% reduction in holding time.

For more information on the Particle Pal Pro click here

Gist

asithailand Metal and Paints Testing Instruments, Pulp, Paper & Packaging Testing Instruments, Uncategorized
Gist

GIST เป็นผู้ผลิตเครื่องมือชั้นนำจากประเทศเกาหลี ทางด้านเยื่อ กระดาษ พลาสติค และบรรจุภัณฑ์ เครื่องมือที่ได้รับความนิยมได้แก่ Dynamic Drainage Tester, Retention Tester, Drum Dryer, Size Press, Sheet Press, Flotation De-Inking, Auto Bar Coater, Laminator, Automatic Dispenser เป็นต้น

Sheet Press
เครื่องอัดแผ่นกระดาษCylinder-formed automatic press which shows high reconstruction and reduce individual worker’s influence unlike existing hand operated press
Adhesive Tester เครื่องทดสอบแรงยึดเกาะของกระดาษ ฟิล์ม ฉลาก เป็นต้น

Testing adhesive and detachment of paper, film and etc.
Drum Dryer
เครื่องอบกระดาษแบบหมุนต่อเนื่องDesigned to dry sheets of papers having harmonized with the current situations of related laboratories and to conduct an accurate experiment.
Size Press เครื่องรีดกดทับกระดาษ

For appropriate drying, the tester is used for the appreciation, research, and production of pulp when paper passes between heated drum and felt ribbon
Dynamic Drainage Tester เครื่องขึ้นแผ่นหรือเตรียมแผ่นกระดาษแบบรวดเร็ว

Automated stock preparation dewatering vacuum measurement and deckeling functions

Retention Drainage Analyzer เครื่องทดสอบการยึดเกาะของสารเคมีสำหรับขึ้นแผ่นกระดาษ

The easy and exact regeneration of the actual huge complicated paper making wet-end part could be performed by the simple test device RDA
Contact Angle Meter เครื่องวัดมุมสัมผัสของ

Doctor Blade Measures the contact angle after using the doctor blade.
Corrugator เครื่องทำลอนลูกฟูก

Paper making equipment with two warmed up rolls rolling in gear by the spindle of a fixed motor. It makes flutes out of master sheet with appropriate tensile strength.
Gloss Meter เครื่องวัดค่าความมันเงา

Measures the light specula reflection on the surface. Easy detachment and excellent mobility
Opacity Meter เครื่องวัดค่าความทึบแสงของกระดาษ

Light intensity is caused by absorption, scattering, etc. when the light source of luminescent part passes through paper materials, The light penetration rate of the materials can be gained by measuring the light intensity
Air Porosity meter เครื่องวัดค่าการซึมผ่านลมของกระดาษ

It brings better quality control and product improvements by measuring the air penetration rate of a paper product.
Auto Dispensing Coater (เครื่องเคลือบพร้อมระบบจ่ายน้ำยาเคลือบแบบอัตโนมัติ)

The full automatic (material) dispensing bar coater that is produced first time in the world by technology of ourselves. The most advanced bar coater that dispensing chemical materials automatically in base product, for electric controlling system, when the researcher or producer getting wired bar coating.
Auto Bar Coater (เครื่องเคลือบกระดาษแบบ Auto Bar)

Equipment of automatic coating not pressing paper surface by using wire bar instead of coating by hand work
DISPENSE & Laminator (เครื่องจ่ายสารเคลือบและเคลือบผิว)
Auto Dispensing Multi-Coater (UV) เครื่องเคลือบกระดาษแบบหลายชั้น
เครื่องมือทดสอบอื่น ๆ
Cell Short Tester

Gets the point of time and data of cell breakdown time by pressure

 Ultrasonic encapsulator

Uses film wrapping with ultrasonic in order to keep in good preservation of document and protect from
Beeswax Exclusion

Removes the wax from the ancient writings automatically and fully automatic operation by display

 Vacuum Sheet

Table Dehydration and dehumidification with using vacuum

Glen Creston

asithailand Metal and Paints Testing Instruments, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments
Glen Creston

 Roll Crushers
  • Single, double and multi-shaft versions
  • Compact design allows retro-fitting into existing process lines
  • Ideal for de-agglomeration of material from sacks or silos and for granulating
    coarse, lumpy, caked or compacted material
  • Maybe mounted in support frame or fitted directly to process line

The ROLL CRUSHER is a rugged slow-running machine used for pre-crushing lumpy material prior to further immediate processing or finer grinding. The Single Roll Crusher can process up to 10 tonne per hour to an end particle size ranging from “walnut” to “hazelnut” dimensions, although output and the degree of fineness depends on the material being crushed. Friable materials, for example, are reduced to a much smaller size.

Applications abound in the chemical, foodstuff, pigments and pharmaceutical, coal and agrochemical industries.
The de-lumping feature greatly enhances flow of materials between processes.

A DOUBLE or MULTIPLE ROLL CRUSHER is specified where larger material lumps are to be reduced. This option has a greater “live-bed” crushing area. The Double or Multiple Roll Crusher is fitted with two or more roller shafts running at differential speeds. The shafts can be specified to run either inwardly or outwardly.

TYPICAL USES

  • การบดเรซินก่อนการละลาย (Pre-crushing of resins prior to dissolving)
  • การบดเม็ดสี (De-lumping of pigment prior to dispersion)
  • Reduction of damp and caked materials
  • การแยกเม็ดพลาสติค (Separation of agglomerates of plastic granules)

CONSTRUCTION
The rugged welded housing is box-shaped and accommodates either single, double or multiple roller shafts, the crushing cams, the crushing combs and the stripper combs. It is designed to produce little or no dust. Models are available in normal carbon,acid resistant stainless steel, hastelloy and wear resistant steel.

The crushing cams of cast steel are mounted on the roller shaft in staggered positions, accurately spaced so that they pass between the crushing and stripping combs which are mounted laterally on opposite sides of the inner housing. Both sets of combs are identical in design but have different functions according to the direction of rotation. Different-shaped crushing elements are available, depending on whether the material is hard, brittle, viscous or moist. Screens can be fitted for special applications.

OPERATING PRINCIPLE
Feed material is introduced to the crushing area by hopper, feeder or directly from a previous process. The crusher can be choke fed and is therefore ideal for silos and spray towers.

The material is seized by the rotating crushing cams and broken against the crushing combs until small enough to pass through and out of the machine. Fine particles included in the feed-stock fall through the combs without being crushed. If certain materials cause a blockage, the rotating shaft automatically reverses its direction, temporarily, to free the material. The bearing plates at both ends of the housing accommodate the roller bearings, protected by radial seals, in which the shaft rotates. The shaft apertures in the end plates are protected by PTFE seals pressure-proofed to 0.5 bar, IP54. The second shaft on the Double or Multiple Roll Crusher is driven by grease-lubricated gear wheels on the outside of the housing.

The maintenance requirements on the Roll Crushers is minimal. The crushing cams, crushing combs and stripper combs are easily removable for cleaning.

The below standard crushers are driven by a hollow shaft worm reduction unit with an integral torque limiter from a flange mounted motor.
The torque limiter has the ability to stop rotation of the crusher shaft whenever the stall torque exceeds the calibrated value, thus safeguarding the transmission components if hard tramp material enters the crushing chamber. These units are ideal for fitting into
process lines and are held on by the inlet and outlet flanges and therefore do not require any bulky support frames.

Cross Beater Mills
For crushing soil, bricks, concrete, rock, cement clinker, coal, glass, ores, minerals, rare earth products, chemicals, spices, grain and hundred of other materials up to medium-hard range.
  • 200g to 50kg/hr
  • Feed size up to 30 mm
  • Reduces material down to 50 microns (depending on material)
  • Coarse, medium or fine grinding?  Grooved or smooth linings available in cast iron, chrome steel and stainless steel
The popular Cross Beater Mill is used for crushing and grinding a wide assortment of materials up to the medium-hard range, within a
variety of industries, including construction, environmental, mineral, chemical, agricultural and ceramic. The mill is remarkable for combining
small size with strength and power for heavy duty application and continuous operation.Material passes from the hopper into the grinding chamber, where it is pulverised between the hard grooved door and chamber linings, as well as by the impact of the three rotating beater tips on the beater arm.

Smooth door and chamber linings are also available; these are interchangeable with the standard grooved linings and are especially suited for use with most friable materials, such as soil, where grinding efficiency is unaffected by the absence of grooves but with the advantage of easy cleaning.

The mill processes samples from 200 grams up to a maximum of about 50kg/hr, with an initial lump size of up to 30mm down to a finest end particle size of approximately 50 microns. For continuous throughput, material can be fed into the mill by means of a vibratory feeder fitted above the hopper. Output varies according to the nature of the product and the screen mesh size

FEATURES

  • Beater tips can be re-adjusted to maintain performance
  • The mill can be stand-mounted or bolted to a bench
  • A 5-litre receptacle with filter tube and clamps is included
  • A 30-litre receptacle is available as an optional accessory (customers’ own containers or sacks can be attached, if required)
  • Dust-free and easy to clean
Interchangeable screens, with different hole diameters, determine the fine particle size. The bulk of the ground product is reduced to a size much finer than the screen hole. For example, when grinding friable, medium-hard substances using a 0.5mm screen, the approximate percentages which pass through the following BS mesh sieves are:
  • 100% through BS mesh 72 (0.212mm)
  • 98% through BS mesh 85 (0.18mm)
  • 95% through BS mesh 100 (0.15mm)
  • 70% through BS mesh 150 (0.106mm)
  • 40% through BS mesh 200 (0.075mm)
Screens are changed quickly and simply by sliding them in and out of the recess provided. They are available in stainless steel with the following hole sizes (see table below):
The mill processes samples from 200 grams up to a maximum of about 50kg/hr, with an initial lump size of up to 30mm down to a finest end particle size of approximately 50 microns. For continuous throughput, material can be fed into the mill by means of a vibratory feeder fitted above the hopper. Output varies according to the nature of the product and the screen mesh sizeFEATURES

  • Beater tips can be re-adjusted to maintain performance
  • The mill can be stand-mounted or bolted to a bench
  • A 5-litre receptacle with filter tube and clamps is included
  • A 30-litre receptacle is available as an optional accessory (customers’ own containers or sacks can be attached, if required)
  • Dust-free and easy to clean
Interchangeable screens, with different hole diameters, determine the fine particle size. The bulk of the ground product is reduced to a size much finer than the screen hole. For example, when grinding friable, medium-hard substances using a 0.5mm screen, the approximate percentages which pass through the following BS mesh sieves are:
  • 100% through BS mesh 72 (0.212mm)
  • 98% through BS mesh 85 (0.18mm)
  • 95% through BS mesh 100 (0.15mm)
  • 70% through BS mesh 150 (0.106mm)
  • 40% through BS mesh 200 (0.075mm)

Screens are changed quickly and simply by sliding them in and out of the recess provided. They are available in stainless steel with the following hole sizes (see table below):

CONSTRUCTION
The housing is of heavy duty cast iron. The grinding chamber lining and door lining are available in cast iron, chrome steel and stainless steel. Beater arms come in cast iron and stainless steel, and beater tips in chrome, steel, and stainless steel and chrome free. There is also a special unit with smooth liners for soil grinding that offers fast cleaning and minimizes cross contamination. Cast iron is the hardest of the three, the least expensive and most frequently used. Chrome steel is usually selected for grinding abrasive materials. Stainless steel is used for applications demanding improved chemical resistance, as well as for food and pharmaceutical applications.

Options include all-stainless steel contact parts, flameproof electrics as well as special hoppers and stands.

SAFETY FEATURES

  • The design of the feed hopper restricts hand access whilst allowing unobstructed passage for the product.
  • The mill cannot be switched on until the door is fully closed.
  • A brake motor, operated by a fail-safe microswitch, brings the beater arm to an instant stop if the door is opened during operation.
  • A specially designed outlet chute prevents access to moving parts from underneath, even with the screen removed.
MOTOR
The mill is powered by a 1.1kW 3000 rpm motor, supplied for use on single-phase or three-phase power supplies. Other voltages can be supplied on request. An integral mill-mounted push button starter and motor protection device are fitted as standard.Dimensions & weight of mill, stand mounted (approximately):
113cm H x 56cm W x 70cm D
52kg nett, 62kg gross

Click To View Cross Beater Mill table

Laboratory Jaw Crushers

Samples arriving in the laboratory often require pre breaking before they can be processed in secondary fine grinding mills; the Laboratory Jaw Crusher is ideally suited for this operation.

These rugged units are capable of crushing the most tenacious of materials; concrete, glass, granite, limestone, ores, quartz, slag and stones.

Normally floor standing units, the Jaw Crushers come as standard with a sample collection tray, they can also be mounted on a frame to accommodate larger containers or fitted into a small pilot plant scheme.

Material is fed into the carbon steel inlet hopper from where it cascades down into the crushing jaws. The action of the eccentric shaft together with the single toggle action both crushes the material and draws it further into the jaws. Output size is determined by the adjustable gap at the bottom discharge end of the jaws.

Standard units are supplied with cast manganese steel jaws and stainless steel lateral wear plates, tungsten carbide and stainless steel jaws are also available and the smallest bench top version can be fitted with Zirconia jaws for non metallic contamination.

Over the years we have supplied many special units with corrosion resistant linings and an all stainless steel version with tungsten carbide jaws for the nuclear industry.
Ball Mills

A comprehensive range of ball mills for laboratory and pilot plant offers the operator a flexible approach with a wide choice of pot sizes and materials. From a single pot to multi-tiered units capable of accommodating 35 litre containers you can be sure to find a mill to suit your requirements.

  • Many models available with variable speed
  • Flameproof units for hazardous areas
  • Wide choice of accessories include screens, pourers and tipping stands for straining the contents of the mill pot
  • Pots available in carbon steel, stainless steel and porcelain

Various different types of grinding media can be used to obtain maximum grinding efficiency. For the ceramic pots steatite or high density alumina balls are generally used whilst for the steel pots either carbon or stainless steel balls are the normal choice. Other media such as zirconia cylinders or glass balls can be supplied to order.
Swing Hammer Mills

The SWING HAMMER MILL is possibly the most economical mill available for the return in output. Glen Creston offers two versions of the mill, each available in three sizes – Models 10, 20, 30 and 60:-

Bottom Discharge, for discharge of material by gravity.

Bottom Discharge, for efficient discharge of lighter weight particles, such as paper, plastic foam or feathers and, possibly, for applications where the processed material is distributed to another processing area or level.

As a further option, each unit can be supplied either on a steel baseplate, for customer installation and wiring, and for positioning over a collecting vessel, pit, conveyor or hopper; the bottom of the mill is open for rapid discharge, or free standing, on a frame, ready-wired with an integral starter; the outlet has a grid to prevent hand access.

OPERATING PRINCIPLE

Bottom Discharge Mill
Material is fed into the carbon steel inlet hopper, protected by safety baffles, from where it falls into the grinding chamber and
is ground by the action of freely rotating hardened steel hammers against a serrated face. The ground product passes through a mild steel screen.

Blower Discharge Mill
The operating principle is the same as for the Bottom Discharge Mill but, additionally, a powerful fan pulls the material into the grinding chamber and through the screen.

MILL FEATURES THAT BENEFIT HUNDREDS OF USERS

  • Low cost
  • High throughputs
  • Low Power Consumption
  • Simple, robust design
  • Large inlet hopper – ideal for bulky material
  • Compact size
  • 180? full-width screen area
  • Easily interchangeable screens, available in mesh sizes 0.5mm to 30mm (One standard screen of customer’s choice is supplied with each mill)
  • Hammers have 4 grinding edges, each of which can be used in rotation, for maximum service life.
  • Serrated liner in top section of mill for increased milling efficiency
  • Durable mill body constructed from cast steel

OPTIONAL ACCESSORIES

  • Magnet, which attaches to inlet chute to attract tramp ferrous metal
  • Product/air separator, comprising duct, cyclone, sack filling neck with clamps and support (for Blower Discharge version only)

Glen Creston project and design team will be pleased to quote for special electrics and accessories, such as frames and chutes, to customers’ individual specifications.

Model 10 Model 20 Model 30
Recommended Operating Speed 3650 rpm 3650 rpm 2750 rpm
Floor Space Required 91cm x 104cm 91cm x 117cm 99cm x 142cm
Power required for Bottom Discharge 2.2kw 4.0kw 7.5kw
Feed Opening Size 15.2cm x 15.2cm 23.6cm x 15.2cm 30.5cm x 15.2cm
Maximum Throughput kg/hr depending on material and screen size 1000 2500 5000
Screnn Area 640.8cmz 965.2cmz 1286mz
Motor TEFC single-phase 230V 50Hz or three-phase 400V 50Hz mounted on heavy steel motor rails, complete with belt drives, guard and starter. Protection IP54
 Micro Hammer Cutter Mills

The Micro Hammer Cutter Mill, with its numerous features is the ideal machine for all dry milling applications.

  • Compact in size – it is perfect for use in the laboratory – it will fit any lab countertop and under hoods.
  • It has the ability to pulverize samples of almost anything in seconds, including wool, cotton & rock.
  • A piece of equipment that provides the power of a Hammer Mill and the cutting action of a Knife Mill.
  • Provides the flexibility to grind a huge variety of products provided by a variable 600-6000rpm motor and 0.2 up to 6.0 mm sieves.
  • Hardened 400 series stainless steel construction.?  Special versions for wheat and corn hardness tests.
Gyro Dish and Puck Mills

For high-speed uniform grinding to analytical fineness of wet and dry samples, from rocks and minerals to ceramics and cement.

Precision sample preparation for XRF and AA analysis as well as for geological/mineral assay work.
Batch grinding from 1cc to 250cc samples

Three vibration amplitude settings

Most samples ground to analytical fineness in 1 to 3 minutes

Suitable for a wide range of grinding dishes, from the most fragile to the
hardest and heaviest

Negligible contamination The British-made GYRO MILL is the perfect choice for rapid, homogeneous and reproducible grinding of samples, both wet and dry. It is widely used in geological/mineral assay work for sample preparation as well as for wet chemistry and instrumental analysis, such as XRF spectroscopy.

Materials routinely ground by this method include brick, castings, cement, ceramics, chemicals, clinker, coal, coke, concrete, ferro-alloys, fertilisers, fluxes, glass, iron, limestone, minerals, paint, pesticides, pharmaceuticals, dried plant material, ore, precious stones, rocks, metals, sand, slags, silicates, soil, steel, wood…

The GYRO MILL is particularly recommended for grinding smaller samples from 1cc to 250cc. Typically, the maximum initial particle size is approximately 12mm, depending on hardness of the material.

GRINDING INTENSITY CONTROL
The GYRO MILL has a positive advantage over many other dish and puck mills
in that the grinding intensity can be adjusted to one of three settings.

Amplitude adjustment ensures the best possible results, since it can be set to complement the special characteristics of the feed material, the fineness required, the wear rate of the dishes and the degree of contamination from the grinding dishes which can be tolerated. By selecting the optimum combination of amplitude and timer settings, precision particle size distributions can be achieved and reproduced.

HORIZONTAL GRINDING ACTION
A further advantage is that it is designed to ensure a smooth, horizontal grinding action with minimal vertical vibration. The puck and rings are larger and have greater height than those in conventional dish and puck mills. Consequently, they avoid ‘bouncing’ off the lid and base of the dish in a vertical direction, minimising excessive wear in these areas together with unnecessary sample contamination.

WORKING PRINCIPLE
The GYRO MILL uses a fixed-speed, standard motor coupled to a flexible drive shaft. Two eccentric weights mounted on the drive shaft transmit a horizontal gyratory vibration to the sealed grinding dish clamped into position on the mill. The vibration causes the puck and one or two rings in the dish to rotate freely, crushing the sample.

Grinding performance is easily controlled by a patented mechanism which adjusts the position of the eccentric weight in relation to each other, allowing three possible grinding intensity amplitudes. With maximum overlap of the weights (‘high setting’), the largest amplitude is achieved; with minimum overlap (‘low setting’), the amplitude is at its smallest

ADVANTAGES

  • Large puck and rings result in high intensity grinding with high percentage of fines
  • Easily adjustable grinding intensity/vibration amplitude control with three settings
  • Variable, built-in process timer
  • Accommodates the whole range of grinding dishes, of whatever manufacture, from the most fragile to the hardest
  • Negligible sample contamination
  • Cam clamping device allows rapid, simple loading and unloading of dishes
  • Sound-proof cabinet
  • Maintenance-free
  • Manufactured in the UK to the highest standards
  • Timer switch, stop/start switch, overload relay and cover safety switches

‘LOW’ gives an amplitude of approximately 10-13mm; the most gentle movement for grinding with the least amount of contamination or when using fragile grinding dishes, such as agate.

‘MEDIUM’ gives an amplitude of approximately 13-17mm; recommended for most grinding applications not involving fragile dishes.

‘HIGH’ gives an amplitude of approximately 17-19mm; for ultra fast grinding or for crushing very hard samples.

EXCEPTIONALLY FAST GRINDING
In our test laboratory, using a 100cc tungsten carbide grinding dish, with grinding intensity set at ‘high’, please see the table below for results which were achieved with the GYRO MILL.

TECHNICAL DATA
Motor : 0.4kW 230V single-phase 50Hz or 400V three-phase 50Hz
(other voltages or frequencies can be supplied on request)

Net weight : 275kg (approx.)

Dimensions : 64 x 64 x 107cm high

Click To View Gyro Dish and Puck Mill table