S::CAN – ผู้เชี่ยวชาญทางด้านเครื่องมือควบคุมคุณภาพน้ำดื่ม น้ำเสีย คุณภาพน้ำก่อนและหลังการบำบัดระดับอุตสาหกรรม เครื่องโดยใช้เทคโนโลยีขั้นสูงที่พร้อมแก้ปัญหาให้กับผู้ใช้งานได้หลากหลาย เครื่องมือที่ได้รับความนิยม เช่น เครื่องวัดค่าปริมาณคลอรีนอิสระในน้ำดื่มโดยไม่ต้องใช้สารเคมี ไม่ต้องบำบัดตัวอย่างหลังการใช้งาน การวัดค่า TSS, Turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC chlorine, chlorine dioxide, hydrogen peroxide, peracetic acid, conductivity, redox, fluoride, dissolved oxygen and solids in water สามารถรายงานค่าแบบต่อเนื่องหรือOnline เหมาะกับการควบคุมการทำงานในไลน์การผลิตแบบหลาย Test Parameter เป็นต้น
Intelligent. Optical. Online.
.
Our products measure a wide range of parameters in numerous applications. From our very solid-state pH probe to our highly innovative spectral probes, all our products are developed with the same philosophy in mind: s::can measuring instruments are intelligent, robust,and require little or no maintenance. They can be seamlessly integrated with other s::can systems but are also compatible with third-party systems.
Intelligent: All s::can sensors are intelligent, they are digital and have the controller, the brain, built in. They check their health every second and can communicate with the operator.
Optical: If possible, we always use optical methods, since they are just better, more reliable, simpler,and more accurate. If no optical method is suitable, we choose the next best alternative.
Online: We make nothing for laboratories, nothing that consumes reagents, nothing with moving parts. s::can is the only real „on-line“ company in the industry that offer an almost complete range of sensors and parameters, and nothing else.
Spectrometer Probes
All s::can spectrometer probes operate using the same measuring principle: Spectrometry. The spectrometer probes are at this point the first and only instruments in the world that can measure optical spectra from 190 to 750 nm directly in liquid media. The substances contained in the medium weaken a light beam emitted by a lamp that moves through the liquid. After contact with the medium its intensity is measured by a detector over a range of wavelengths specific to the application.
More about our spectrometer probes
Spectrometer Probes
All s::can spectrometer probes operate using the same measuring principle: Spectrometry. The spectrometer probes are the first and only instruments in the world that can measure optical spectra from 190 to 750 nm directly in liquid media. The substances contained in the medium weaken a light beam emitted by a lamp that moves through the liquid. After contact with the medium its intensity is measured by a detector over a range of wavelengths specific to the application.
Spektrometersonden
|
|
|
|
High performance online water quality monitoring! s::can proudly announces the launch of the next generation of spectrometers for online water quality monitoring. As the technology leader we have performed extensive research on our customers’ needs and developed the spectro::lyser V3 based on these results. spectro::lyser™ UV-Vis monitors depending… |
spectro::lyser™ titanium pro monitors depending on the application an individual selection of: TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC, fingerprints and spectral alarms, temperature and pressure s::can plug & measure measuring principle: UV-Vis spectrometry over the total range (190-720 nm)… |
spectro::lyser industrial ATEX spectro::lyser™ industrial monitors depending on the application an individual selection of: TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC, fingerprints and spectral alarms, temperature and pressure s::can plug & measure measuring principle: UV-Vis spectrometry over the total range (190-720 nm)… |
|
|
|
spectro::lyser UVspectro::lyser™ UV monitors depending on the application an individual selection of: NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, BTX, AOC, fingerprints and spectral alarms, temperature and pressure. s::can plug & measure measuring principle: UV-Vis spectrometry over the total range (190-390 nm) multiparameter probe with adjustable open… |
i::scani::scan – the new miniature multi-parameter spectrophotometer probe will revolutionize online water quality monitoring: From very cost sensitive applications down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection. The new i::scan combines the high performance of a multi wavelength spectrophotometer with even… |
carbo::lyser V3The carbo::lyser is ideal for the measurement of the organic carbon load, represented by parameters like UV254, TOC, DOC, COD, or BOD, and at the same time, turbidity / solids concentration. Applicability ranges from pure water to industrial waste water. Pre-calibrations for different types of water and applications significantly facilitate… |
|
|
|
ozo::lyser V3Measurement of ozone in water is what the ozo::lyser is optimized for. This member of the spectrometer family is optimized to determine concentrations of ozone dissolved in water online and InSitu. It offers an attractive alternative to classical electrochemical ozone sensors, thanks to its very low maintenance requirement and extreme… |
nitro::lyser V3Applications range from (ultra) pure water in the μg/l range up to industrial waste water in the g/l range. The nitrate concentration displayed is not sensitive to cross-influences from other substance groups such as organic carbon or total solids. The measured parameters are always nitrate and turbidity / solids concentration. |
multi::lyser V3The multi::lyser is a combination of s::can carbo::lyser and nitro::lyser. That means that the s::can multi::lyser is characterised by measuring organic carbon & nitrate for a multitude of pre-defined applications. The multi::lyser is ideal for surface water, ground water, drinking water, wastewater and offers an optimum of cost effectiveness and… |
|
uv::lyser V3The uv::lyser monitors turbidity or TSS and up to 4 freely chosen wavelengts between 190 and 720 nm. Furthermore, depending on the application, it also measures turbidity or solids. The uv::lyser provides cost effective but accurate and precise instrument for applications in surface water, ground water, drinking water and wastewater. |
Other Sensors
The ammo::lyser™ is an ion-selective multiparameter probe that can continuously determine the parameters ammonium, potassium, nitrate, pH and temperature directly in the water – without the need for complicated and maintenance-intensive sample pretreatment. In addition, s::can also offers sensors for measuring chlorine, chlorine dioxide, hydrogen peroxide, peracetic acid, conductivity, redox, fluoride, dissolved oxygen and solids in water.
|
|
|
|
A multi-parameter probe for the online measurement of ammonium. It is an absolutely reliable device outclassing conventional analysers in terms of measurement stability and lifetime. Precision is guaranteed by real time compensation of the ammonium value with temperature, pH and potassium and a high performance reference electrode. ammo::lyser™… |
ammo::lyser ecoA multi-parameter probe for the online measurement of ammonium. It is an absolutely reliable device outclassing conventional analyzers in terms of measurement stability and lifetime. Precision is guaranteed by real time compensation of the ammonium value with temperature, pH and potassium and a high performance reference electrode. ammo::lyser… |
chlori::lyserThe chlori::lyser is a revolutionary pH- and flow-independent sensor for monitoring free chlorine or total chlorine. Its internal buffer electrolyte allows pH-independent measurement between pH 4 to 10+, and its 3-electrode system provides extremely stable readings. High precision is ensured even at high fluctuations of pH, temperature and flow. … |
|
|
|
chlodi::lyserThe chlodi::lyser is an amperometric sensor for monitoring chlorine dioxide. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated and the chlodi::lyser is not cross sensitive to chlorine. chlodi::lyser measures chlorine dioxide s::can… |
hyper::lyserThe hyper::lyser is an amperometric sensor for monitoring hydrogen peroxide. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated. s::can plug & measure measuring principle: amperometric (membrane covered) ideal for all kinds… |
peroxy::lyserThe peroxy::lyser is an amperometric sensor for monitoring peracetic acid. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated and the peroxy::lyser is not cross sensitive to high concentrations of hydrogen peroxide. … |
|
|
|
condu::lyserThe condu::lyser is a maintenance-free and long-term stable probe for online measurement of conductivity, automatically compensated with temperature. It can be mounted directly in the media or in a flow cell providing high precision by either conductive or inductive measurement. Thanks to the high measurement range it is ideal for… |
redo::lyserThe redo::lyser is a long-term stable and maintenance free sensor for the online measurement of the redox potential immersed in the medium or in a flow cell. Thanks to a groundbreaking reference electrode, high precision is guaranteed in virtually any medium and under harshest conditions. It is pre-calibrated ex works… |
pH::lyserThe pH::lyser is a maintenance-free sensor for the real-time measurement of pH and temperature directly in the medium or in a flow-cell. Even under tough conditions (up to 90°C) or in water with very low conductivity long term stability and precise measurement is ensured. The sensor is pre-calibrated ex works… |
|
|
|
fluor::lyserThe fluor::lyser is an ion-selective measuring device designed for the continuous monitoring of the concentration of fluor (F) dissolved in water. Also the instrument continuously measures the temperature of the medium and corrects the measured concentration accordingly. For proper usage the probe has to be connected to an s::can controller,… |
soli::lyserThe soli::lyser is an optical probe that measures concentrations of suspended solids directly in the water. It integrates the temperature measurement for online correction. Using the principle of infrared absorbance, the readings are not affected by colors. The soli::lyser utilizes an automatic cleaning system that uses compressed air for removal… |
oxi::lyserThe oxi::lyser is an optical multi-parameter probe that measures the concentration of dissolved oxygen and the temperature directly in the water. It does not need a minimum flow to produce accurate readings and integrates the temperature measurement for On-Line correction. Minimal conventional calibration and virtually zero maintenance. oxi::lyser™… |
Terminals & Software
With the con::cube, s::can has in fact established a standard for industrial process control terminals. Via a large color display and a touch panel it allows menu-driven, user-friendly communication with all s::can sensors and basically any other digital (RS485) or 4-20 mA sensor of different make, as well as the operation of distributed systems, either via telephone, radio, GSM, or GPRS telemetry: all available in one terminal.
More about our terminals & software
With the con::cube, s::can has established a standard for industrial process control terminals. Via a large color display and a touch panel it allows menu-driven, user-friendly communication with all s::can sensors and basically any other digital (RS485) or 4-20 mA sensor of different make, as well as the operation of distributed systems, either via telephone, radio, GSM, or GPRS telemetry: all available in one terminal.
Bediengeräte & Software
|
|
|
con::cube V3con::cube – a compact, versatile terminal for data acquisition and station control. Newest processor technology and very flexible options for interfacing to SCADA or any central database systems makes the con::cube in combination with moni::tool a powerful terminal for compact station control. s::can high-end IoT (Internet of Things) terminal… |
moni::toolmoni::tool is a revolutionary new platform for the management of an almost unlimited number of stations, online probes, analyzers and parameters. Intuitive operation – on site or remote – and reams of valuable features make moni::tool essential for state of the art sensor and station management. |
vali::toolvali::tool automatically detects, marks and (optionally) corrects untrustworthy data, it detects outliers, noise and checks for discontinuous data. It ensures only high quality data are fed into the event detection module. It also provides the user with indications on sensor maintenance requirements, as well as automatic detection of malfunctions. Provides… |
|
|
|
ana::toolana::tool identifies unknown and unusual conditions and enables operators to react in a timely manner to faults in the monitored system, determines normality of this data and triggers an alarm when a significant deviation from the norm is detected Start ana::tool is installed with application-specific default settings ana::tool requires… |
con::lyteThe terminal con::lyte displays the readings of all s::can probes & sensors connected on site via backlight LCD. Seven push buttons are available to ensure operation and changing of settings via software, which is optimised in respect of user-friendly operation and operational safety. s::can low-cost terminal designed for control applications… |
Io::ToolIntuitive web interface for data visualization and configuration of the spectro::lyser V3. View all your data at a glance on your mobile device Io::Tool visualizes measurement data, time series, fingerprints and status information Configure your spectro::lyser, install new parameters, and perform calibrations Try Io::Tool online!… |
|
|
|
visu::toolvisu::tool is a fast and easy-to-use data visualization software for PCs and notebooks. In 3 simple steps you can visualize huge amounts of data from con::cube or con::lyte into single or multiple graphs. The visu::tool “lyte” version is available for free download. The advanced visu::tool “pro” version includes a vast… |
con::nect V3Power supply for the spectro::lyser V3. Connect to the spectro::lyser via Bluetooth or WLAN and use the user-friendly webinterface Io::Tool for probe configuration and data visualization. s::can connection device for one spectrometer V3 probe and one cleaning device expand con::cube/con::lyte sensors networks (longer distances and higher number of… |
con::nectFor operating the spectro::lyser™, an commercial computer/notebook can be used. In this case the interface box con::nect connects the probe to the computer/notebook, to the supply of compressed air and to the power supply. This way, your computer/notebook is transformed into a terminal for the spectro::lyser™. s::can power… |
pipe::scan
The pipe::scan is a modular sensor system for monitoring drinking water quality in pipes under pressure. It measures up to 10 parameters in one device: TOC, DOC, UV254, Turbidity, Color, Chlorine, pH/Redox, Conductivity, Temperature and also Pressure. The water quality data can be sent to basically any central database via almost any protocol. Multiple pipe::scans are certainly the ideal solution to monitor drinking water at any point in the network.
pipe::scan
Drinking water quality monitoring in the network
The pipe::scan is a modular sensor system for monitoring drinking water quality in pipes under pressure. It measures up to 10 parameters in one device: TOC, DOC, UV254, Turbidity, Color, Chlorine, pH/Redox, Conductivity, Temperature and Pressure. The water quality data can be sent to any central database via almost any protocol. Multiple pipe::scans are the ideal solution to monitor drinking water at any point in the network.
- Accurate measurement in perfect agreement to standardized lab reference… not just ”trending”
- Organics and Turbidity monitoring
- Totally flow-independent, even works under stagnating conditions
- Hot-maintenance: without interrupting the flow/pressure, and for each sensor individually
- Full-scale event detection with real-time alarms within the drinking water distribution network
- 6 months service time: Efficient, reliable stand-alone operation without maintenance
Datasheet Drinking Waterpipe::scan Brochure
pipe::scan
Monitoring Stations
The fully modular s::can monitoring stations combine s::can instruments to a compact and versatile system. They present a complete solution, so the user only has to connect water supply and -discharge (“plug & measure”) in order to receive at no extra cost a previously unheard variety of immediately available information and parameters.
The fully modular s::can monitoring stations combine s::can instruments to a compact and versatile system. They present a complete solution, as the user only has to connect water supply and -discharge (“plug & measure”) in order to receive at no extra cost a previously unheard variety of immediately available information and parameters.
Stationen
|
|
|
micro::station for Drinking WaterThe s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel. The fully modular micro::station combines s::can instruments… |
micro::station for Waste WaterThe s::can micro::station for waste water is designed for online monitoring of water quality parameters in waste water. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipes on a compact panel. The fully modular micro::station combines s::can… |
nano::stationThe fully modular nano::station combines s::can instruments to a super-compact and versatile system. It presents a complete solution, as the user only has to connect water supply and -discharge in order to receive at no extra cost a previously unheard variety of immediately available information and parameters. The s::can nano::station… |
Accessories
Our automatic cleaning systems keep your probes and sensors clean and therefore minimizing regular maintenance. Our accessories also include flow fittings for drinking and waste water, brackets, extension cables and various spare parts.
|
|
|
auto::bladeMechanical Cleaning for spectrometer probes with path length 5 mm Mounting on F-48-V3 wastewater flow cell Exchangeable wiper blades Set of cleaning and valve unit Technical Specification Power Supply: 12 VDC Power consumption (typical): 200 mA Cable length: 1,5 m Tube length: 1,5 m Housing… |
for easy attachment of one i::scan technical specification housing material: PVC, POM-C dimensions (diameter x lenght): 58 x 115 (without connection fitting) installation / mounting: submersed part numbers F-110-iscan: carrier for i::scan, for easy horizontal attachment F-120-iscan: carrier for i::scan, for easy vertical… |
ruck::sackSubmersible Autobrush for spectrometer probes and i::scan Exchangeble brushes for spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm One Basis module (motor unit) for all Versions Shelter protects the brush from clogging Technical Specification Power supply: 12 VDC Power consumption… |
|
|
|
auto::bladeMechanical Cleaning for spectrometer probes with path length 5 mm Mounting on F-48-V3 wastewater flow cell Exchangeable wiper blades Set of cleaning and valve unit Technical Specification Power Supply: 12 VDC Power consumption (typical): 200 mA Cable length: 1,5 m Tube length: 1,5 m Housing… |
for easy attachment of one i::scan technical specification housing material: PVC, POM-C dimensions (diameter x lenght): 58 x 115 (without connection fitting) installation / mounting: submersed part numbers F-110-iscan: carrier for i::scan, for easy horizontal attachment F-120-iscan: carrier for i::scan, for easy vertical… |
ruck::sackSubmersible Autobrush for spectrometer probes and i::scan Exchangeble brushes for spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm One Basis module (motor unit) for all Versions Shelter protects the brush from clogging Technical Specification Power supply: 12 VDC Power consumption… |
|
|
|
flow cell for sensors (waste water)For proper and easy installation of s::can sensors (pH::lyser, redo::lyser or condu::lyser) in waste water technical specification housing material: PVC dimensions : 177 x 95 x 111 mm Part Number: F-48-sensor… |
single flow-cell (by-pass fitting), Pom-C (for i::scan)for proper and easy flow-through installation of one i::scan automatic cleaning with autobrush for i::scan available (optional) technical specification housing material: POM-C dimensions (diameter x length): 70 x 86 process connection: G 1/4″, hose nozzle 7mm installation / mounting: flow cell operating temperature:… |
flow cell – for pathlength 100 mmfor proper and easy flow-through installation of s::can spectrometer probes for applications without automatic cleaning OPL 100 mm technical specification housing material: POM-C dimensions (diameter x length): 60 x 160 mm weight (min.): 300 g process connection: G 1/4”, hose nozzle 7mm installation /… |
|
|
|
flow cell for sensors (waste water)For proper and easy installation of s::can sensors (pH::lyser, redo::lyser or condu::lyser) in waste water technical specification housing material: PVC dimensions : 177 x 95 x 111 mm Part Number: F-48-sensor… |
single flow-cell (by-pass fitting), Pom-C (for i::scan)for proper and easy flow-through installation of one i::scan automatic cleaning with autobrush for i::scan available (optional) technical specification housing material: POM-C dimensions (diameter x length): 70 x 86 process connection: G 1/4″, hose nozzle 7mm installation / mounting: flow cell operating temperature:… |
flow cell – for pathlength 100 mmfor proper and easy flow-through installation of s::can spectrometer probes for applications without automatic cleaning OPL 100 mm technical specification housing material: POM-C dimensions (diameter x length): 60 x 160 mm weight (min.): 300 g process connection: G 1/4”, hose nozzle 7mm installation /… |
|
|
|
s::can compressorprovides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™ removal of fouling using compressed air aluminium housing IP65 for wall mounting optional 12 VDC or 110 VAC version available railing-mounting set available technical specification power supply:… |
Pressure mounting for i::scan in-pipe Installation (i::scan removal under pressure)for proper and easy installation of one i::scan in a pressure pipe under pressure drilling of pipes possible (for PE, PVC, DCI, steel and AC pipes) the i::scan can be mounted and demounted under pressure without interuption of the water flow technical specification housing… |
cleaning valvesupports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™ removal of fouling, sediments and clogging using compressed air or water version B-44-2 specially for use in comination with the s::can compressor technical specification cable length: 2.4… |
|
|
|
pressure connection replacement setsimple and proper supply of compressed air for cleaning compatible with certain s::can flow cell fittings technical specification cable length: 3 m assembling: ex works housing material: jacket PU, connection nozzle in nickel-plated brass (for spectrometer probes: fitting PP) process connection:… |
flow cell for i::scan (waste water)for proper and easy flow-through installation of one i::scan in waste water application technical specifications housing material: PVC dimensions (lenght x width x height): 177 x 83 x 90 mm process connection: 1″ inside thread installation / mounting: flow cell recommended flow: <… |
flow cell autobrush – for spectro::lyser pathlength 100 mmfor proper and easy flow-through installation of s::can spectrometer probes for applications with frequent, automatic cleaning cleaning of optical windows with rotating brush without demounting of spectrometer probes OPL 100 mm technical specification power supply: 12 VDC assembling: ex works… |
|
|
|
fixing adapter – stainless steelsupports the proper and easy installation of s::can systems quick mounting and demounting of InSitu installed s::can probes and sensors technical specification housing material: stainless steel weight (min.): 2.6 kg process connection: ID 50 mm part number: F-15 recommended accessories F-14-3 mounting… |
cleaning brushsupports quick, easy and proper cleaning of optical windows of s::can spectrometer probes mechanical removal of persistent window fouling for pathlength 2, 5 or 15 mm technical specification dimensions (diameter x length): length 200 mm weight (min.): 1 g part number: B-60-1 for 2… |
flow cell autobrush – for spectro::lyser pathlength 35 mmfor proper and easy flow-through installation of s::can spectrometer probes for applications with frequent, automatic cleaning cleaning of optical windows with rotating brush without demounting of spectrometer probe OPL 35 mm technical specification power supply: 12 VDC assembling: ex works housing material: POM-C… |
|
|
|
cleaning agentsupports quick, easy and proper cleaning of optical windows of s::can spectrometer probes chemical removal of persistent window fouling very effective for grease and organic fouling technical specification weight (min.): 1.3 kg part number: B-61-1… |
s::can field casestand-alone operation of s::can spectrometer probes no on-site power supply necessary for remote monitoring tasks without infrastructure technical specification power supply: 12 VDC nominal assembling: ex works housing material: PP dimensions (width x height x depth): 270 x 175 x 245 mm… |
power cord for con::cube and con::lyteoptional 2 m power cable for s::can terminals technical specification cable length: 2 m assembling: ex works housing material: jacket: PU process connection: CEE-7 shockproof plug protection class: IP 44 sales region: Europe part number: C-31-eu… |
|
|
|
weather shield for s::can terminalsfor protection against severe weather conditions transparent cover plate available (optional) mounting prepared for con::cube or con::lyte for mounting on walls or railings incl. mounting device for diameter 40-63mm technical specification housing material: stainless steel dimensions (width x height… |
flow cell for four s::can physical probesfor proper and easy flow-through installation of condu::lyser, chlori::lyser, redo::lyser and pH::lyser for applications without automatic cleaning in drinking water technical specification housing material: POM-C dimensions (diameter x length): 106 x 103 weight (min.): 1.05 kg process connection: G 1/4″, hose nozzle 7mm… |
carrier s::can sensorsfor proper and easy submersed installation of an s::can sensor sensor cable and pressure hose compatible mounting with pipe (AD 50 mm) technical specification housing material: PVC and stainless steel dimensions (diameter x length): 85 x 86 mm weight (min.): 300 g… |
|
|
|
i::scan flow cell for i::scan and up to 3 additional s::can probesfor proper and easy flow-through installation of one i::scan and up to three s::scan physical probes automatic cleaning with autobrush for i::scan available (optional) technical specification housing material: POM-C dimensions (diameter x length): 106 x 103 weight (min.): 1 kg (without autobrush) process… |
extension cable for s::can sensors and s::can ISE probesextension of sensor cable IP 68 plug connection flexible adjustment to local conditions technical specification cable length: 10, 20 or 30 m assembling: ex works housing material: jacket: PU protection class: IP 68 interface connection to s::can sensors:… |
flow cell – for spectrometer probe (Waste Water)for proper and easy flow-through installation of one spectrometer probe in waste water applications technical specifications housing material: PVC dimensions (lenght x width x height): 177 x 83 x 90 mm process connection: 1″ inside thread installation / mounting: flow cell recomended flow:… |
|
|
|
reference electrode for ammo::lyser™long life time (typically 3 years) non-porous, solid state electrode smaller drift than conventional electrodes technical specification dimensions (diameter x length): 20 x 145 mm weight (min.): 100 g protection class: IP 68 (mounted in housing) part number: E-532-ise-ref (for ammo::lyser V1, spare… |
potassium electrode for ammo::lyser™technical specification dimensions (diameter x length): 20 x 145 mm weight (min.): 100 g protection class: IP 68 (mounted in housing) part number: E-532-ise-K (for amm::lyser V1, spare part) E-533-ise-K (for ammo::lyser V2, spare part)… |
pH electrode for ammo::lyser™technical specification part number: E-532-ise-pH (for ammo::lyser V1, spare part new) E-533-ise-pH (for ammo::lyser V2, spare part new)… |
|
|
|
flow cell for ISE probe (Waste Water)for proper and easy flow-through installation of ammo::lyser in wastewater technical specification housing material: PVC dimensions : 177 x 83 x 108 mm part Number: F-48-ammo… |
ammonium electrode for ammo::lyser™technical specification dimensions (diameter x length): 20 x 145 mm weight (min.): 100 g protection class: IP 68 (mounted in housing) part number: E-534-ise-NH4 (for ammo::lyser V1, spare part) E-535-ise-NH4 (for ammo::lyser V2, spare part)… |
Inserts for spectrometer, stainless steel, saphire windowsfor adaption or repair the optical path length of s::can spectrometer probes stainless steel (ISO 1.4404), suitable for 35/5/2/1/0,5 mm OPL incl. sealings, saphire measurment windows and service tools expert service by s::can Salespartner required; for permanent application! part numbers A-500-s (for optical pathlength 0.5… |
|
|
|
flow cell – for pathlengths from 0.5 mm to 35 mmfor proper and easy flow-through installation of s::can spectrometer probes for applications without automatic cleaning OPL 0.5 … 35 mm technical specification housing material: POM-C dimensions (diameter x length): 74 x 132 mm weight (min.): 450 g process connection: G 1/2”, hose nozzle 12mm… |
multifunctional slide for pathlengths from 0.5 mm to 35 mmfor referencing of spectrometer probes for pathlength 0.5 – 35 mm for spectral measurement in laboratory technical specification dimensions (diameter x length): 60 x 100 mm (outside) installation / mounting: for 0.5 mm to 35 mm part number: E-421-1… |
multifunctional slide for pathlength 100 mmfor referencing of spectrometer probes for pathlength 100 mm for spectral measurement in laboratory technical specification dimensions (diameter x length): 60 x 160 mm (outside) installation / mounting: for 100 mm part number: E-421-2… |
|
|
|
carrier s::can spectrometer probefor proper and easy submersed installation of s::can spectrometer probes probe cable and pressure hose compatible mounting with pipe (AD 50 mm) technical specification housing material: PVC and POM-C dimensions (diameter x length): 63 x 403 (for F-110-spectro); 63 x 510 mm (for F-120-spectro)… |
flow cell – for pathlength 100 mmfor proper and easy flow-through installation of s::can spectrometer probes for applications without automatic cleaning OPL 100 mm technical specification housing material: POM-C dimensions (diameter x length): 74 x 196 mm weight (min.): 800 g process connection: G 1/2”, hose nozzle 12mm installation /… |
extension cable for s::can spectrometer probesextension of probe cable IP 67 plug connection flexible adjustment to local conditions technical specification cable length: 10, 20 or 30 m assembling: ex works housing material: jacket: PU protection class: IP 67 interface connection to s::can spectrometric probes: MIL 10P, IP 67,… |
