สิ่งพิมพ์ พลาสติค และบรรจุภัณฑ์

เครื่องมือทดสอบสำหรับอุตสาหกรรมเยื่อกระดาษ
PTI RAPID-KÖTHEN SHEET FORMER

Cod. 0708xx Standard: ISO 5269/2, DIN 54 358 Laboratory standardized hand sheet former. This machine has the formation column and the dryers incorporated. Easy and quick machine with a manual and an automatic version. Possibility of white water circulation system.

SEMI-AUTOMATIC PTI SHEET FORMER

Cod. 070818 Standard: ISO 5269/1, SCAN C26, TAPPI T205 Semi automatic sheet former with automatic filling, agitation, calmness, emptying and drainage.

TECHPAP DYNAMIC SHEET FORMER

Cod. 070828 The dynamic sheet former has been designed to make rectangular sheets in laboratory, in similar conditions as the sheet former. This system allows the sheet formation with different fibres orientation. It also allows several layers sheets formation.

PTI MANUAL SHEET FORMER

Cod. 070816 Standard: ISO 5269/1, SCAN C 26, TAPPI T205 Manual Sheet Former machine. Made of stainless steel or cast iron.

PFI MILL IDM

Cod. 070101 Standards: ISO 5264/2, TAPPI T248, DIN-EN 25 264-2, SCAN C24 Laboratory equipment to beat chemical or semi-chemical pulps under standardized conditions. Rapid beating of small amounts of pulp (30 gr.). Beating pressure with weight. Pressing the “Start” button automatically starts the beating program and it stops automatically after reaching the adjusted number of revolutions. Beater roll and cointaner are made of stainless steel.

JOKRO PTI MILL

Cod. 070108 Standard: ISO 5264/3, DIN 54 360, EN 25 264/3 Laboratory equipment for beating pulp under standardized conditions. Equipment with 6 independent beating devices. Used basically in Eastern European countries.

PTI DRUM DRYER

Cod. 070703 Laboratory instrument to dry paper sheets. Made of a similar felt as those of the paper machines. Speed rotation and drying temperature adjustable.

PTI SCHOPPER-RIEGLER FREENESS TESTER

Cod. 070201 Standard: ISO 5267/1, SCAN C19/M3, BS 6035/1 Instrument to determine the refining degree and the drainage speed of the paper pulps. Pneumatic, manual and digital equipments.

PTI CANADIAN STANDARD FREENESS TESTER

Cod. 070206 Standards: ISO 5267/2, TAPPI 227, BS 6035/2, SCAN C21 Equipment to measure the refining degree of the paper pulp according to the canadian method.

DISTRIBUTOR PTI FOR PULP

Cod. 070601 Equipment to melt beaten and refined pulp samples  and tip off the fibre compact in the sheet formation in laboratory.

PTI DESINTEGRATOR EQUALIZER

Cod. 070605 Mixed equipment to desintegrate and melt pulp in laboratory during the sheet formation.

PTI BAUER MC-NETT FIBRE CLASSIFIER

Cod. 070301 Standard: TAPPI T233, SCAN M6, PACTAC C5V Equipment with 3, 4 or 5 tank units to determine the fibre length of pulp in pulp papers by classification.

PTI SOMERVILLE SHIVE CONTENT ANALYSER

Cod. 070401 Standard: TAPPI T275, UM 242 Equipment to determine the shive content and stickers in pulp.

PTI BRECHT-HOLL FRACTIONATOR

Cod. 070405 Standard: FAK Merkblatt 201, Zellcheming Merkblatt VI/I/66 Equipment to classify mechanical pulp and shive content analysis. Method used in the Eastern European countries similar to the Somerville shive content Analyser.

PTI CHIP CLASSIFIER

Cod. 070501 Standard: TAPPI UM 21, SCAN CM 40/80The chip classifier has 4 or 5 trays for the wood chips. These trays made in aluminium. Non noise equipment.

PULMAC POLLUTANT CLASSIFIER IN MASTER SCREEN PULP

Cod. 070406 Standard: TAPPI T274 Pulmac mechanical classifier for all kind of pollutants in pulp as dust, stickers, and chips.  The equipment is used for virgin pulp as well as for recycled pulps. The pollutants rest in a filter paper that later can be analyzed with an image analysis system. The equipment has a quick measurement system, in 5 to 10 minutes the results will be obtained.

PTI DESINTEGRATOR

Cod. 070607 Standard: ISO 5263, SCAN C18/M2, TAPPI T205 Equipment for the desintegration of pulp suspension. Made entirely in stainless steel. Stainless stell and acrylic transparent pot to see the desintegrator evolution.

TECHPAP Compact MORFI FIBER ANALYSER

Cod: 071102 This equipment provides high resolution analysis of pulp fibre and shives. Analysis includes length, width, curl, kink and coarseness of the fibre, as well as shives and fines analysis. The Morfi can measure thousands of fibres quickly with high accuracy with no need of special sample preparation. The system has no capillary tubes that could plug and is easy to maintain.

TECHPAP MORFI WT FIBER WALL ANALYSER

Cod: 071101 This equipment has been developed by the CTP, to measure in few minutes the wall of the paper fibres. Is a complementary equipment to the Morfi Compact and will add high accuracy thickness results (0,7μ) of the fibre wall, its measurement and its distribution.

TECHPAP RETENTION TESTER

Cod: 071201 The Retention tester is used to study the influence of the additives on the paper manufacture, specially the retention, sizing and wet strength additives. The pulp is agitated and diluted to the right consistence, the additives are added and mixed with the pulp and the paper sheet is quickly made. The same fabric as the ones used on the MP can be used. The White water is collected for analysis and the dynamic drainage behaviour is displayed.

PTI DYNAMIC JAR

Cod: 071203 Evolved Original Dynamic Jar from DDJ. Measures the retention dosage and drainage. It is possible to add a chemical products dosage device and an empty unit. Easy use equipment.

LABORATORY PULPER

Cod: 071001 Stainless Steel equipment to defibration of virgin or recycled pulps. Available in 3 sizes 8,17 and 45 litres, to work from 30 to 350 grams of pulp and a consistence range between 2 and 7%. Rotor speed adjustable up to 1500 revolutions per minute.

PTI FLOTATION CELL

Cod: 071204 Equipment designed to simulate the ink elimination in paper on the laboratory. Totally Automatic equipment with the possibility of working manually. Work consistence up to 2% depending on the ashes content.

PNEUMATIC SHEET PRESS

Cod. 070902 & 070903 Standards: ISO 5269/1, TAPPI T205, SCAN C26/M5 Pneumatic sheet press to crush pulp moist sheets and paper, under standard conditions.

PULMAC ZERO SPAN 1000

Cod. 080302 Equipment to obtain the fibres Zero-Span and the Short-Span. This is the Pulmac basic and manual model. Allows to know the traction strength in fibres and also their union force. With this equipment it is possible to recognize the pulp differences during manufacture and be able to correlate it with the different coil physic parameters.

PULMAC ZERO SPAN 2000

Cod. 080303 Equipment to obtain the fibres Zero-Span and the Short-Span. This is the Pulmac automatic model. Allows to know the traction force in fibres and also their union force. It allows to make test in dry sheets as well as in moist. With this equipment it is possible to recognize the pulp differences during manufacture and be able to correlate it with the different coil physic parameters.

PULMAC ZERO SPAN 3000

Cod. 080304 Equipment to obtain the fibres Zero-Span and the Short-Span. This is the Pulmac automatic model, that includes the formation station of the sheets to be tested. As it is totally automatic, there are no errors during the sheet formation. It also allows to know the traction force in fibres and also their union force. It allows to make test in dry sheets as well as in the moist ones. With this equipment it is possible to recognize the pulp differences during manufacture and be able to correlate it with the different coil physic parameters.

PTI PULP CENTRIFUGE

Cod. 071208 High speed laboratory centrifuge, to centrifuge pulp samples. It has 4 positions of 100ml, that can centrifuge 150 grams of pulp. The revolutions can be adjusted from 100 to 14.000 r.p.m. Robust equipment with easy water discharge.

TECHPAP PULP AIR TESTER

Cod. 071202 Equipment designed to measure the air in cellulose pulp suspensions. Easy use equipment and specially designed to evaluate the air in pulp during the different steps of manufacture. The air tester main frame is made in stainless steel.

PTI AUTOMATIC KAPPA NUMBER ANALYSER

Cod. 071209 Standard: TAPPI T236, ISO 302, SCAN C1, PACTAC G.1

Automatic Kappa Numero analyser with control & results software. This equipment calculates automatically the quantity of lignina in pulp.

Standard: TAPPI T230, ISO 5351/1, ISO 5351/2, SCAN C15, PACTAC G.24P

The Semi-automatic PTI Viscosimeter calculates easily and quickly the pulp viscosity in standard conditions. Ubbelohde or Cannon Fenske head measuring system according to the standards.

Standards: ISO 5 264/1, SCAN C25, TAPPI T200, PAPTAC C2
For beating of pulp under standardized conditions for laboratory purposes.

Standards: ISO 526/7, SCAN C 19M3, Zellcheming Merkblatt V/7/61, BS 6 035/1
For determination of the freeness and the drain ability speed of fibre, ground wood and mechanical pulp.

For cooking and production of fibrous and non-fibrous papermaking in the laboratory.

Standards: ISO 534, TAPPI T411, SCAN P7, EN 20534

Top table Micrometer to measure the thickness on paper sheets. 0,001mm resolution. Also available a Pneumatic model.

Standards: ISO 534, SCAN P7-P11-P47, FEFC Nº3, TAPPI T411

Automatic Micrometer with head and weights interchangeable, for several uses. It is also possible to make in series measurements. Complete Statistics

Standards: ISO 2756, TAPPI T403 y T807, ASTM D477, BS3137

Laboratory equipment to determine the Mullen burst on paper. Graphical screen representation of the curve of pop and burst index value and complete statistics.

Normas: ISO 5636/3 y 8791/2, DIN 53108, SCAN P21

Equipo para la medición de la Lisura y la Porosidad en el papel. Posibilidad de medir la lisura por las dos caras y la porosidad simultáneamente (opcional)

Standards: ISO 2469, 2470, 2471, 3688, TAPPI T519, T525, T527, T 534
Equipment to measure the brightness, colour, fluorescence and opacity in paper. Calibration Standards included. Top table equipment with PC connection.

Equipment to obtain the fibres orientation. Includes TSI and TSO calculus. Electronic, easy use equipment. Measurement in 4 seconds by position. Touch screen, with easy measurement menus. Complete statistics. This equipment is a part of the PTA line series.

Equipment to simulate laboratory superficial treatments in paper. Glues or resins application by platens. Wide of the sample up to 300mm. The temperature, speed and applied pressure can be adjusted. Very even results.

Laboratory equipment to make extensions, with superficial lap, glues, coatings, inks, varnish….. Several bars applicator thickness. Easy use equipment and it is possible to order it with heating.

Standard: ISO 5626 TAPPI 423
Equipment to determine the resistance of a standardized sample of paper, that has been continuously twin folded.

The DCT equipment is a new development to know the paper or cardboard curl by a laser measurement system. Robust and easy use, working under Windows© system.

Accessory used with the PDA-C equipment, to de-aerated the coating by means of vacuum technology.

Equipment to measure the dynamic absorption in paper against medium and high viscosity liquids, up to 150.000 mPa.s (oil inks, offset inks, glues, varnishes).

Equipment to measure the dynamic penetration in paper over 32 pixels of 1mm2. Allows to obtain a penetration topography on 32 different penetration points. It shows the mottling problems. It can measure with wetting water (with alcohol)

Equipment to measure the paper heat shrinkage on one of its sides. The temperature can be regulated up to 230ºC. It measures a shrinkage percentage depending on the paper heating time.

Provided with the latest colour control technology through a mechanism designed specially for a basic colour reproduction.

To determine whiteness and colour of several materials such us paper, board, ceramic etc.

Standard: DIN-EN-ISO 3037

Saw cutter for sample cuts for ECT tests. Specially designed for double-double and triple boards in high gramages. Suction cleaner incorporated to collect the wreckage produced due to the cut.

Standards: ISO 7263, DIN-EN-ISO 7263, TAPPI T809, SCAN P27

Vertical equipment to corrugate medium paper samples, for the CMT and CCT tests. Energy optimized equipment

Standards: ISO 7263, DIN-EN-ISO 7263, TAPPI T809, SCAN P27

New vertical equipment with interchangeable riffle plates A, B y C, for medium paper for CMT and CCT tests. These riffles are easy to change. This new equipment has been developed for the ISO Standard modification design.

Standard: ISO 3034 , FEFCO Nº3
Valid for corrugated board up to 25mm thickness. Manual or automatic equipment. Robust and Easy use equipment.

Standards: ISO 3036, SCAN P23, ASTM D781, FEFCO Nº5, TAPPI T803, DIN 53142
To obtain the absorbed energy or puncture resistance on corrugated board for packaging.

Standards: ISO 2759, DIN 53141, TAPPI T403, T807 y T810

Equipment to measure the Mullen burst strength in cardboard. Digital display with complete statistics. Mullen tests in paper can also been done by selecting the paper speeds.

Standards: ISO 2759, DIN 53141, TAPPI T403, T807 y T810

Equipment to determine the burst strength in board. Digital display with complete statistics.

Standards: ISO 9895, TAPPI T 826, DIN 54518, BS 7325
Equipment to measure the short compression strength SCT for packaging papers. Display with compression curve and complete statistics.

Standards: DIN EN 22872, ISO 12048, TAPPI T804, UNE 57163/5, FEFCO Nº50
Box compression tester and other kind of packages, with fixed and oscillate plates, to fulfil all the compression standards. Software program optional to make compression, stacking and cyclic tests. .

600x600x800mm/10KN
600x600x800mm/20KN
600x600x800mm/30KN
600x800x800mm/10KN
600x800x800mm/20KN
600x800x800mm/30KN
800x800x800mm/10KN
800x800x800mm/20KN
800x800x800mm/30KN
800x1000x800mm/10KN
800x1000x800mm/20KN
800x1000x800mm/30KN
1000x1000x1000mm/10KN
1000x1000x1000mm/20KN
1000x1000x1000mm/30KN
For other sizes ask the IDM commercial department

Standard: DIN EN 23035

Special sample cutter, hand lever operation to make easier the double-double cardboard cut. 3 Thorns attachment to avoid the sample movement

Pneumatic cutter for paper sheets. Circular cutter of 50 or 100cm². Suitable for frequent cuts and high gramage papers.

Device to cut samples for the gramage measurement. Manual cut of 100 cm²

Cutter to obtain paper strips to make tensile, RCT, CCT SCT,…. tests. Strips wide to be chosen (12,7-15-25,4 or 50 mm)

Double blade sample cutter to cut paper strips. Wide available 12,7 – 15 – 25 – 25,4 and 50 mm.
The special double blade cutter has been designed to cut paper strips of low gramage (8-30 g/m²).

Special Cutter for sample preparation for STIFFNESS AND TEAR tests.

Cutter designed to cut samples on the wide side of all the paper roller, placed horizontally on its edge. When making the cut, simultaneously generates a small roller with all the wide of the paper roller to be later tested. It makes paper samples totally clean and without marks

Equipment designed to cut paper strips. At the same time as it cuts, it generates, as the TT 2000 cutter, a paper roller of 300mm wide, to be later on tested. Papers with gramage from 35 to 600 grams / square meters can be cut.

Pneumatic punch for big samples as A4. Maximum cut up to 10 sheets. Specially designed to cut paper samples to be tested or paper samples for laboratory or commercial department.