Orange Photonics

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Can, Aerosol Can, Glass Bottle, PET Bottle, Testing, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Petroleum & Petrochemical Testing Instruments, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments, Uncategorized April 7, 2022April 7, 2022

liquid chromatography equipment

Orange Photonics – ผู้ผลิตเครื่องมือวัด เครื่องทดสอบสารสำคัญจากผลิตภัณฑ์ กัญชง กัญชา (Cannabis Analyzer Model LightLab 3) โดยใช้เทคนิค Liquid Chromatography แบบพกพา (Portable) สามารถทดสอบนอกสถานที่ (Onsite Testing) เพื่อให้ได้ค่าที่แม่นยำ เพิ่มประสิทธิภาพและความสะดวกสบายในการวัด ภายในระยะเวลาประมาณ 10.5 นาที สามารถวัดค่าองค์ประกอบสาร Cannabinoid ได้หลากหลายตามหมวดการวัด พร้อมฟังก์ชันการเชื่อมต่อ WIFI และรองรับการทำงานด้วยแบตเตอรี่

CANNABIS Analyzer mode LightLab 3 Modules

· Δ9-THC, THC-A, CBD, CBD-A, CBN, CBG, CBG-A (Standard Module)

· CBN-A, CBC-A, CBC, Δ8-THC, Δ10-THC (Minor Module)

· Δ9-THC, THC-A, Total THC (Hemp Compliance)

CANNABIS ANALYZER Model LightLab 3

A picture containing text, sky

Description automatically generated

Graphical user interface, application

Description automatically generated

The accurate and easy-to-use LightLab 3 Cannabis Analyzer lets non-technical users analyze cannabinoid content like a testing laboratory. LightLab uses two common analytical methods, liquid chromatography and spectroscopy, simplifying the process to make on-site testing affordable and easy.

Standard Cannabinoids

Δ9-THC, THC-A, CBD, CBD-A, CBN, CBG, CBG-A

Minors Module

CBN-A, CBC-A, CBC, Δ8-THC, Δ10-THC

Hemp Compliance

Δ9-THC, THC-A, Total THC

Terpenes Module

Semi-quantitative

Features

0-100% Cannabinoid analysis
Results in 10.5 minutes
Easy sample preparation
Portable, rugged
WiFi enabled
8-hour battery life

Sample Types

Flower, Biomass, Young plant, Concentrates, Processed waste, Tinctures, Infused products, Edibles (Contact us)

A picture containing text, indoor, orange

Description automatically generated

EASY TO USE

LightLab 3 provides lab-grade cannabinoid analysis in a rugged, easy-to-use format. Its touchscreen streamlines and simplifies the entire analytical process so every team member can follow the same workflow to produce consistent results.

Step-by-step – On-screen instructions guide you through each step of the sample preparation process based upon the sample type you select.
Accessories – Your LightLab includes all the accessories you need to begin using LightLab right out of the box, including a scale, sample shaker and more.
Tags – You have the option to include information about your sample including the operator’s name, sample ID etc. Each test result will automatically include date, time etc.
Factory Calibration – LightLab arrives pre-calibrated and ready-to-use right out of the box. LightLab calibrations use Certified Reference Standards for traceability.
Mobile Monitoring – LightLab’s Mobile Monitoring feature gives users the ability to remotely track testing progress from start to finish from a smartphone.
Results – The results from your most recent tests, as well as previous tests, may be viewed on the screen, exported as a CSV file and shared via text or email directly from LightLab.
Pro Mode – Advanced technical LightLab users may bypass guided screens to streamline workflow in Pro Mode and access chromatograms.
Workbench Setup – If you run a high volume of tests from stationary workstation, a Workbench Setup will let you run more tests at a lower cost-per-test.

RESULTS

Sample analysis results are available in five formats.

1. On-screen – After you run your sample, your results will populate on LightLab’s screen. From this screen you can add additional details about the sample by tapping “notes” or you can tap “done” and run your next sample. You may also scroll through your test history to compare results.

2. Spreadsheet – LightLab provides a results spreadsheet (CSV) which gives you maximum flexibility and the opportunity to further analyze sample results in aggregate.

3. Report – You can use the CSV file to generate a full report, containing all the details about the sample you ran, including all inputted information such as moisture correction, operator, sample size and more.

4. Text and email – Once your LightLab is set-up on your Wi-Fi, you can share your results via text or email.

5. Mobile Monitoring – Get an instant notification when your test results are ready; view and share those results straight from your smartphone.

LightLab 3 results screen, all current modules shown.

Orange Photonics LightLab Brochure

LightLab 3 may be customized to meet your testing needs. LightLab’s standard configuration can report seven cannabinoids and additional modules can add greater capabilities to your LightLab.

Hemp Compliance

Compounds

Δ9-THC, THC-A, Total Potential THC

Product

Flower, Biomass, LOD 0.05%

Users

Cultivators, Processors, Regulators

Terpenes

Compounds

Semi-quantitative, Low, medium, high

Product

Flower, Concentrates, Infused

Users

Cultivators, Processors

Minors

Compounds

CBN-A, CBC, CBC-A, Δ8-THC, Δ10-THC

Product

Flower, Concentrates, Infused

Users

Cultivators, Processors, Breeders

HEMP COMPLIANCE MODULE

On-site THC compliance testing has never been easier. LightLab’s Hemp Compliance Module takes the guess work out of crop monitoring delivering THC-A, D9-THC and Total Potential THC content between .05% and 3% with high precision. The additional capabilities, combined with LightLab’s cannabinoid panel tests, will allow you to get a complete picture of your crop’s cannabinoid production with real-time data.

Monitor CBD/THC ratios
Harvest at peak
Schedule Department of Ag visits at the right time
Verify Certificates of Analysis
Evaluate biomass

Learn more about the Hemp Compliance Module here

TERPENES MODULE

Terpene molecules are responsible for the scent profiles of cannabis plants and products. They offer an indication of freshness, they impact the consumption experience, guide consumer preference and support product differentiation.

With the Terpenes Module, LightLab can analyze the richness of the sample’s terpene content without any changes in sample preparation or hardware upgrade.

Semi-Quantitative Analysis

Over 100 cannabis terpenes have been identified to date and those terpenes generally fall into two categories: monoterpenes and sesquiterpenes. Monoterpenes comprise 80% of cannabis terpenes. LightLab can analyze and quantify the monoterpenes present in a sample and uses that analysis to make an assumption about the monoterpene-sesquiterpene ratio in the sample. LightLab reports terpene content in samples as low, medium or high terpene content offering a great first-line analysis that can help cultivators and processors understand and value their product when terpene rich products are the end goal.

Low Terpene Range: <1%
Medium Terpene Range: between 1% and 2%
High Terpene Range: >2%

No additional steps are required beyond the standard liquid extraction used for LightLab cannabinoid analysis. In addition, no additional analysis time is needed – LightLab calculates the terpene content at the same time as cannabinoid analysis.

MINORS MODULE

By their very nature, minor cannabinoids are uncommon and can be a valuable product differentiator. These minor cannabinoids in a plant or product can be an indication of unique genetics, an opportunity for product differentiation and measure of plant quality.

LightLab’s Minors Module analyzes the following five cannabinoids:

CBC-A: Cannabichromenic Acid. CBC-A is the acidic form of CBC. It is non-psychoactive and is formed in some plant genetics alongside THC-A and CBD-A, typically at lower concentration. It’s a precursor is CBG-A. Some genetics will exhibit 1-5% CBC-A.
CBC: Cannabichromene. CBC is the neutral form of CBC-A. CBC is often present in hemp and CBD containing plants, and more rarely in THC containing plants. Since many laboratories do not yet measure CBC, the Minors Module will allow hemp farmers, CBD growers and processors to select for higher CBC plants and differentiate their product with a new cannabinoid.
CBN-A: Cannabinolic Acid. CBN-A is the acidic form of CBN. It is often formed from aged cannabis plants. Very old plants may contain 0-5% CBNA. CBN-A in combination with CBN are good indicators of the age and storage conditions of plant material. Higher CBN-A and CBN typically indicates old plant material or poorly stored plant material.
Δ8-THC: Delta-8-Tetrahydrocannabinol. Δ8-THC is generally made by converting CBD or Δ9-THC in a chemical reaction. Note that the process used to create Δ8-THC often creates other cannabinoids, including Δ9-THC. When running a Δ8-THC sample, LightLab has a higher detection limit of 4% for flower samples and 12% for concentrates.
Δ10-THC: Degraded THC, Dihydroxy-THC. In some cases, distillation can breakdown the THC molecule into by-products, reducing the potency of the product and affecting the taste. Two of the major breakdown components are CBN and Δ10-THC. LightLab can measure the amount of Δ10-THC, allowing distillation operators to ensure their product is pure and potent while maintaining high throughput. In some cases, extraction operators will intentionally attempt to generate novel cannabinoids through a degradation process. Δ10-THC is a precursor to most of the degradation products generated.

HOW IT WORKS

Built for Cannabis. Built for Performance.

LightLab was designed to be easy-to-use and deliver lab-grade accuracy. LightLab applies liquid chromatography which separates the cannabinoids, spectroscopy which uses light to analyze the sample’s compounds and linear regression mathematics to calculate sample results.

HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

Your analytical laboratory likely uses High Performance Liquid Chromatography (HPLC) to analyze your hemp or cannabis sample. Like an HPLC, LightLab pushes an extracted cannabis sample through a column. The column separates the cannabinoids in the sample by slowing down cannabinoids by different amounts based on their affinity to the column. This allows each cannabinoid to exit the column at a different time. For example, CBD may exit the column first, then D9THC and so on. Once the column separates the cannabinoids, they move to the next step in the analytical process: spectroscopy.

ULTRAVIOLET SPECTROSCOPY

Spectroscopy uses light to measure the analytical composition of compounds. During the analytical process the sample flows between a light source and a detector. The detector will quantify how much light is getting through the sample. Since every cannabinoid has a particular light absorption signature LightLab can provide quantitative measurements. LightLab borrows spectroscopy technology from the Curiosity Mars Rover, providing an accurate and dependable analysis every time.

LIGHTLAB CHROMATOGRAM AND CALCULATIONS

When LightLab analyzes a sample, it separates cannabinoids over time and detects them with UV light at several wavelengths. An HPLC works in much of the same way, though in many cases only one wavelength of light is utilized. In a standard HPLC, the chromatogram shows peaks that represent different analytes; the area of the analyte is correlated with the concentration of that analyte. While LightLab uses the chromatogram as part of its analysis, the calculation is not a strict peak area calculation. Instead, LightLab uses a sophisticated multi-dimensional, non-linear regression to calculate results. This algorithm uses multiple UV wavelengths along with the chromatogram to determine the final results. This allows for a more robust and accurate measurement of cannabinoids even with challenging environmental conditions and complex samples.

RESULTs

Track. Share. Compare.

It has never been easier to track, share and manage your test data. Track test progress from your mobile device, share test results, and generate a Certificate of Analysis complete with authenticity verification controls.

Click image and scan QR code to reveal Result Dashboard

CERTIFICATE OF ANALYSIS

Generate a Certificate of Analysis (CoA) with the click of a button. The CoA reports the cannabinoid content of the sample in weight percent, limits of detection, user inputted sample identifiers, and automatically generated information such as time stamp and instrument serial number. A QR code on the report corresponds with the original test results and confirms the authenticity of the report itself.

MOBILE MONITORING

LightLab’s Mobile Monitoring feature gives users the ability to remotely track sample test progress, start to finish from a smartphone. This gives users the ability to step away from their LightLab and tend to other tasks while running a test. LightLab sends notifications when the next step of the testing process is ready and redirects to the Result Dashboard when the test is complete.

RESULT DASHBOARD

When a test is complete, a unique QR code is generated that brings you to a Result Dashboard, populated through an internet webpage. The Result Dashboard displays sample details and final results. From this page you can share your data to your social media pages or contacts, generate an official Certificate of Analysis, and download a CSV report.

RESULTS

Sample analysis results are available in five formats.

1. On-screen – After you run a sample, the results will populate on the LightLab. From this screen you can add additional details about the sample by tapping “Notes,” tap “Done” to run your next sample, or select “Share” to share your results via email or text. The share feature has two options for sending results; send the Certificate of Analysis or choose to send the Result Dashboard.

2. Certificate of Analysis – An official Certificate of Analysis (CoA) which includes user inputted sample identifiers and final results.

3. Result Dashboard – The Result Dashboard is a unique webpage displaying sample details and final results. From this page you can generate an official Certificate of Analysis, download a CSV report, and share sample details.

4. Report – You can use the CSV file to generate a full report containing the details about the sample you ran, including all inputted information such as moisture correction, operator, sample size and more.

5. Text and Email – Once your LightLab is set-up on Wi-Fi, you can share your results via text or email. Sharing capabilities include an official Certificate of Analysis or the Results Webpage.

CALIBRATION

A picture containing person, indoor, person, preparing

Description automatically generated

District Derp’s Co-Owner, Chris, running samples on LightLab. Look for District Derp on social media to learn about their cutting-edge operation.

LightLab 3 is shipped to you calibrated and ready to run. After you have run 1,000 tests or after one year, whichever comes first, return your LightLab to Orange Photonics for a calibration service. LightLab calibrations use Certified Reference Standards.

The only hands-on maintenance required is the easy task of replacing the Selective Separation Column every 25 tests. LightLab runs a self-cleaning cycle automatically and therefore it does not require manual cleaning or flushing.

LIGHTLAB OPERATING EXPENSE

Like all lab-based liquid chromatography instrumentation, LightLab uses solvent to extract the cannabinoids from the sample. The same LightLab Extraction Solvent is also used as a carrier solution (mobile phase). LightLab Plant or Concentrate Test Kits include everything you need to run a sample in one economic package that includes vials, syringes, solvents, filters and Selective Separation Columns. Cost per test varies depending on the volume of tests required, but typically fall in the $3-5 price range.

LIGHTLAB WARRANTY

Your LightLab Cannabis Analyzer comes with a standard one-year factory warranty. An extended 2-year warranty option with calibration service is available.

Organomation

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Petroleum & Petrochemical Testing Instruments, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments March 20, 2019June 18, 2020

ผู้ผลิตเครื่องระเหยสารเคมี (Solvent Evaporator) เครื่องระเหยพร้อมระบบพ่นไนโตรเจน (Nitrogen Evaporator) เครื่องทำให้สารเข้มข้น เครื่องสกัดด้วยตัวทำละลาย เครื่องสกัดด้วยสารเคมี (Solvent Extractor) เครื่องสกัดแบบ Rotary Solid-Liquid Soxhlet Extractor เครื่องสกัดแบบ Rotary Liquid-Liquid Soxhlet Extractor สามารถระเหยหรือสกัดได้หลายตัวอย่างในเวลาเดียวกัน เครื่องผลิตก๊าซไนโตรเจน (Nitrogen Generator) เครื่องทำความเย็นแบบไหลเวียนระบบปิด (Chiller) สำหรับการทดสอบทางด้านปิโตรเลียม ปิโตรเคมี พลาสติก โพลิเมอร์ อาหาร เครื่องดื่ม ยา เครื่องสำอาง สารสกัด หัวน้ำหอม เหมาะสำหรับห้องแล็ป หน่วยงานวิจัย และสถาบันการศึกษา มหาวิทยาลัย เป็นต้น

Nitrogen
Evaporators

Solvent
Evaporators

Solvent
Extractors

Nitrogen
Generators
Laboratory
Chillers

Nitrogen Evaporators

Organomation manufactures and distributes three product lines of nitrogen evaporators for analytical chemistry sample preparation. Our N-EVAPs, MULTIVAPs, and MICROVAPs have been used for over 50 years in laboratories around the world.

Organomation nitrogen evaporators combine a heated bath with nitrogen blow down for fast and gentle sample concentration.

N-EVAPs

Flexibility and Individualization for Diverse Samples

MULTIVAPs

Consistency for Large Batch Concentrations

MICROVAPs

Compact for Microplates and Small Batches

N-EVAP Product Line

Organomation’s N-EVAP nitrogen evaporators are extremely well suited for numerous sample preparation methodologies. We have created a diverse product line with instruments ranging from six to forty-five sample positions. Our nitrogen evaporators utilize adjustable nitrogen blow down technology allowing for full control of nitrogen flow to samples, with no wasted nitrogen gas. We combine this technology with uniform heat applied efficiently through either water or dry baths. This technique saves labs money by simultaneously maximizing solvent evaporation volume and rate.

6 Position N-EVAP Nitrogen Evaporator

12 Position N-EVAP Nitrogen Evaporator

24 Position N-EVAP Nitrogen Evaporator

34 Position N-EVAP Nitrogen Evaporator

45 Position N-EVAP Nitrogen Evaporator

20 Position Auto N-EVAP Nitrogen Evaporator

MULTIVAP Product Line

Organomation’s MULTIVAPs are ideal for concentrating large batches of samples, and are used in numerous sample preparation methodologies. The 9, 30, 48, and 80 position units are available in high temperature dry block models, while the 64 and 100 position models utilize our classic water bath to maximize sample evaporation. Nitrogen gas is delivered to each sample via individual stainless steel needles connected to the hand built gas distribution manifold. All of our MULTIVAPs include a built in timer to shut heat and nitrogen gas off for maximum efficiency.

Our nitrogen evaporators utilize adjustable nitrogen blow down technology allowing for full control of nitrogen flow to samples, with no wasted nitrogen gas. We combine this technology with uniform heat applied efficiently through either water or dry baths. This technique saves labs money by simultaneously maximizing solvent evaporation volume and rate.

Dry Block:

Water Bath:

64 Position

100 Position

MICROVAP Product Line

Organomation’s MICROVAP laboratory evaporators are used in numerous sample preparation methodologies, and are designed for controlled concentration of small samples.

These instruments are light, compact and digitally controlled for ease of use.

The MICROVAPs are offered in four different models, providing versatility for many different sample preparation applications. The single and triple position MICROVAP microplate evaporators condense samples held within 96 well plates, and can accommodate both deep well and micro well plates. The 15 and 24 position MICROVAP laboratory evaporators are intended for small batch solvent evaporations, such as concentrations of sample batches in microcentrifuge tubes.

Microplate Evaporators

Single Plate MICROVAP	Triple Plate MICROVAP

Small Batch Evaporators

15 Position MICROVAP	24 Position MICROVAP

Solvent Evaporators

One of the largest downsides to traditional organic extraction procedures is the large volumes of solvent that are evaporated with no procedure for collection and proper disposal. The lack of an efficient solvent recovery process can lead to health and environmental hazards as volatile organic solvents are released into the environment. Organomation’s S-EVAP solvent evaporators with solvent collection condense and collect excess solvent into individual or central collection flasks.

The S-EVAP-RB and S-EVAP-KD are each capable of up to 97% solvent recovery.

The S-EVAP-RB and S-EVAP-KD easily evaporate large volumes of solvent out of samples to leave dry or concentrated samples for analysis or further processing.

S-EVAP-RB for round flasks

S-EVAP-KD for Kuderna Danish flasks

S-EVAP-KD

Solvent Evaporators for Kuderna Danish (KD) Flasks

The S-EVAP-KD instruments are available in two temperature control options: digital control or mechanical thermostat. There are also several different models to accommodate various flask sizes (250 ml, 500 ml, and 1000 ml).

Digital Temperature Control:

12010 – Samples up to 250 ml, 10
positions

12018 – Samples
up to 500 ml, 8 positions

Mechanical Thermostat:

12027 – Samples
up to 250 ml, 8 positions

12037 – Samples
up to 500 ml, 5 positions

The S-EVAP KD combines standard KD evaporation procedures with
our unique rotary water bath and manifold, increasing sample through put and bench space. The S-EVAP-KD comes in 5, 8, and 10 position models.
Organomation’s S-EVAP solvent evaporators have a broad range of applications including oil and grease analysis using Freon and other approved solvents, concentrating extracted materials from Soxhlet operations, and other KD evaporation methods.

At each sample position the KD flask rests on the bath cover disk and the concentrator tube sits partially submerged in the deep water bath below the cover disk. The solvent boils from the flask and through the Snyder
column. The solvent vapor then cools in the condenser which is attached to a centrally located water manifold. The glassware is held in place with quick disconnect fittings which allow for easy retrieval of samples. The solvent leaves the condenser through a specially designed side arm into either an individual collection flask or a centrally located solvent collection vessel. Solvent recovery through individual or central collection options reduces laboratory emissions and increases laboratory and environmental safety. The S-EVAP-KD comes standard with Organomation’s reduced height glassware so that the instrument can fit into a standard fume hood.

S-EVAP-RB

Solvent Evaporators for Round Flasks

The S-EVAP-RB instruments are available in two temperature control options: digital control or mechanical thermostat. There are also several different models to accommodate various flask sizes (500 ml, 250 ml, and 125 ml).

Digital Temperature Control:

12090 – Samples
up to 250 ml, 10 positions

12008 – Samples
up to 500 ml, 8 positions

Mechanical Thermostat:

12060 – Samples
up to 250 ml, 8 positions

The S-EVAP-RB solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using Freon and other approved solvents and concentrating extracted materials from Soxhlet operations. The instrument consists of a base and stand assembly, mounted in a shallow round bath. The entire instrument rotates so that all samples are accessible from the front. At each sample position the round sample flask rests on the bath cover disk and is heated by hot water and steam. The solvent boils from the flask and cools in the condenser which is attached to a centrally located water manifold. The solvent leaves the condenser through a specially designed side arm into an individual collection flask. Solvent recovery through individual collection reduces laboratory emissions and increases laboratory and environmental safety.}

Solvent Extraction Instruments

You are in the lab and need to run multiple extractions at once. First you set the Soxhlet extractors up on individual heating mantles or baths. Next, tubing is individually attached to each of the condensers. There are dozens of tubes to deal with, and multiple heating mantles to monitor. The problem with this arrangement is that in the end, you have spent more time assembling and monitoring your apparatuses than performing the actual chemistry.

The ROT-X-TRACT
product lines eliminate chaos and wasted time by allowing for up to 8, or 10 extractions to be performed simultaneously in a single bath with a single water manifold.

To conserve valuable bench space, all samples are arranged in a circle and the instrument rotates allowing each sample to be accessed from the front. Individual condensers are connected to the centrally located water manifold through quick disconnect fittings. The water supply and drain manifolds have one water supply line in, one drain line out, allowing the instrument to rotate freely without tangling the tubing.

ROT-X-TRACT-S – Rotary
Solid-Liquid Soxhlet Extractor

ROT-X-TRACT-L – Rotary
Liquid-Liquid Soxhlet Extractor

ROT-X-TRACT-LC – Corning
Accelerated One-Step Liquid-Liquid Extractor

Nitrogen Generators

NITRO-GEN – Lightweight unit for fast nitrogen
generation; runs off an external air compressor

NiGen
40-1 – All-In-One solution with
integrated air compressor

Laboratory Chillers

6000 Series Recirculating Chiller

Ortoalresa

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Petroleum & Petrochemical Testing Instruments, Pharmaceuticals / Cosmetics Testing, Pulp, Paper & Packaging Testing Instruments March 20, 2019June 18, 2020

ผู้ผลิตเครื่องทดสอบค่าน้ำและตะกอน (Water & Sediment) ด้วยการปั่นเหวี่ยง (Centrifuge) มีให้เลือกทั้งแบบควบคุมอุณหภูมิเย็น (Cooling Control with Refrigeration) และแบบให้ความร้อนขณะปั่นเหวี่ยง (Heating Control) หรือแบบไม่มีระบบควบคุมอุณหภูมิ สามารถรองรับตัวอย่างได้หลากหลาย เช่น น้ำมันดีเซล น้ำมันเตา น้ำมันหล่อลื่น น้ำมันหล่อลื่นใช้แล้ว น้ำมันหม้อแปลง ตัวอย่างทางจุลชีวะ จุลินทรีย์ ไบโอเคมี ตัวอย่างเลือด เครื่องสำอาง สารเคมี โพลิเมอร์ เยื่อกระดาษ สารเคลือบ สารลดแรงตึงผิว สี กาว เป็นต้น นอกจากนี้ยังมีเครื่องนึ่งฆ่าเชื้อ (Autoclave) เครื่องทำน้ำกลั่นสำหรับห้องปฏิบัติการ (Water Distiller) เครื่องเขย่าตะแกรงร่อน (Sieve Shaker) เครื่องบดตัวอย่างด้วยเม็ดบด (Ball Mill)

เครื่องปั่นเหวี่ยงสำหรับการทดสอบทั่วไป /Centrifuges for general applications

	เครื่องปั่นเหวี่ยง Minicen
	เครื่องปั่นเหวี่ยง Series Digicen 21
	เครื่องปั่นเหวี่ยง Microcen 24
	เครื่องปั่นเหวี่ยง Series Consul 22
	เครื่องปั่นเหวี่ยง Biocen 22
	เครื่องปั่นเหวี่ยง Series Digtor 22
	เครื่องปั่นเหวี่ยง Biocen 22 R
	เครื่องปั่นเหวี่ยง Dilitcen 22
	เครื่องปั่นเหวี่ยง Unicen 21
	เครื่องปั่นเหวี่ยง Series Magnus 22

เครื่องปั่นเหวี่ยงสำหรับการทดสอบทั่วไปเฉพาะด้าน / Centrifuges for special applications

	เครื่องปั่นเหวี่ยง Series Digtor 22 C
	เครื่องปั่นเหวี่ยง Plasma 22
	เครื่องปั่นเหวี่ยง Lacter 21
	เครื่องปั่นเหวี่ยง Cytocentrífuge
	เครื่องปั่นเหวี่ยง Vetcen
	เครื่องปั่นเหวี่ยง Digtor 22 Col

เครื่องทดสอบอื่นๆ / Other laboratory products

	เครื่องนึ่งฆ่าเชื้อ Autoclave Ecoclaves
	เครื่องทำน้ำกลั่นสำหรับห้องปฏิบัติการ Distillers
	เครื่องบดตัวอย่างด้วยเม็ดบด Ball mill
	เครื่องเขย่าตะแกรงร่อน Sieve shaker & sieves

Pamas

PAMAS เป็นบริษัทผู้ผลิตเครื่องนับจำนวนและวัดขนาดอนุภาค (Particle Counter) หรือเครื่องวัดระดับความสกปรกของของเหลว เครื่องวัดประสิทธิภาพในการกรอง เหมาะสำหรับการทดสอบน้ำมันหล่อลื่น น้ำมันไฮโดรลิค น้ำมันเครื่องบิน น้ำมันเชื้อเพลิง ตัวทำละลาย น้ำดื่ม น้ำเสีย และของเหลวอื่น ๆ ทุกชนิด มีให้เลือกทั้งแบบทดสอบนอกสถานที่ (Portable) แบบตั้งโต๊ะสำหรับห้องปฏิบัติการ (Laboratory) และแบบทดสอบต่อเนื่อง (Online)

PARTICLE COUNTERS – LABORATORY
	PAMAS SBSS เครื่องนับจำนวน และวัดขนาดอนุภาคสำหรับห้องปฏิบัติการ สำหรับวัดค่าระดับความสกปรกของน้ำมันหล่อลื่น น้ำมันไฮโดรลิก ตัวทำละลาย และของเหลวอื่นๆ ทุกชนิด Laboratory particle counter for all viscous fluids Versatile sample preparation ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS SBSS english
	PAMAS SBSS WG เครื่องนับจำนวน และวัดขนาดอนุภาคสำหรับห้องปฏิบัติการ สำหรับตัวอย่างของเหลวไฮโดรลิคที่มีน้ำเป็นองค์ประกอบ – Water Based Hydraulic Fluids (Water-Glycol) Laboratory particle counter for water based hydraulic fluids (Water-Glycol) Versatile sample preparation ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS SBSS WG english
	PAMAS SVSS เครื่องนับจำนวน และวัดขนาดอนุภาคสำหรับห้องปฏิบัติการ สำหรับทดสอบตัวอย่างที่มีค่าความหนืดต่ำ หรือของเหลวที่ใช้สำหรับการชำระล้าง Laboratory particle counter for low viscosities For infusion solutions and clean fluids ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS SVSS english
	PAMAS FastPatch 2 GO เครื่องนับจำนวน และวัดขนาดอนุภาคแบบอัตโนมัติสำหรับห้องปฏิบัติการ สามารถวัดได้ทั้งอนุภาค และเส้นใย ความละเอียดระดับไมครอน Advanced automatic microscope system For particle counting and fibre analysis ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS FastPatch 2 GO english
	PAMAS AS2 เครื่องนับจำนวน และวัดขนาดอนุภาคแบบอัตโนมัติสำหรับห้องปฏิบัติการ พร้อมระบบสายพานลำเลียงตัวอย่างเข้าสู่เครื่องทดสอบ Fully automated particle counting system Contamination analysis of several hundred samples a day ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS AS2 english
	PAMAS AS3 เครื่องนับจำนวน และวัดขนาดอนุภาคแบบอัตโนมัติสำหรับห้องปฏิบัติการ เหมาะสำหรับการทดสอบตัวอย่างที่มีจำนวนมาก สามารถทดสอบได้ไม่ต่ำกว่า 200 ตัวอย่าง ภายใน 8ชั่วโมง Fully automated particle counting system Contamination analysis of several hundred samples a day ดาวน์โหลดแคตตาล็อคได้ที่นี่>> PAMAS AS3 english

Paragon Scientific

ผู้ผลิตสารมาตรฐานสำหรับการทวนสอบ ตรวจเช็ค สอบเทียบเครื่องมือ ได้รับมาตรฐานระดับ ISO17025 และ ISO17034 เช่น สารมาตรฐานทางด้านปิโตรเลียม เช่น จุดให้ควัน (Smoke Point) จุดไหลเท (Pour Point) จุดเยือกแข็ง (Freezing Point) ค่าการกลั่น (Distillation) ค่าความหนาแน่น (Density) สารมาตรฐานสำหรับค่าสี (AOCS, RYBN, ASTM Colour, Saybolt, Hazen/Pt-Co/APHA, Gardner), ความหวาน (Brix) ค่าการหักเหแสง (Refractive Index : RI), ค่าแอลกอฮอลล์ (%ABV), ค่าความหนืด (Viscosity) เช่น D445 Kinematic Viscosity, CCS, Flow Cup, Zahn Cup, Brookfield Viscometer ค่าความเป็นกรดแบบ TAN และค่าความเป็นด่างแบบ TBN, ค่า pH, Conductivity เป็นต้น

Accreditation

Paragon Scientific has UKAS accreditation. Make sure your organisation gets it right, first time every time. The United Kingdom Accreditation Service is the sole body recognised by Government for the accreditation of conformity assessment against internationally agreed standards for testing, calibration, inspection and certification.

Brochure

ดาวน์โหลดแคตตาล็อคใหม่ล่าสุดได้ที่นี
Click here to download our brochure

สารสอบเทียบมาตรฐานสำหรับอุตสาหกรรมปิโตรเลียม

(Certified reference material – crm) / Paragon Scientific, UK

สำหรับการสอบเทียบ (calibration)
ทวนสอบ (verification) เครื่องมือทดสอบสำหรับงานทางด้านปิโตรเลียม
สารมาตรฐานมาพร้อมใบรับรองตามมาตรฐาน
ISO17025 และผลิตจากโรงงานที่ได้รับมาตรฐาน
ISO17034 ว่าด้วยการผลิต
บรรจุ
และการออกใบรับรองผลการทดสอบให้สอดคล้องกับ
ISO17025 เป็นต้น
ซึ่งถือว่าเป็น
CRM / RM ระดับสูงที่ได้รับการยอมรับจาก
Auditor

Certified
Reference Materials

Multi-Parameter Certified Reference Materials

Paragon’s
Multi-Parameter Certified Reference Materials, provide both calibration and
verification options for laboratory test equipment, all from the same sample,
with their values certified to the highest level of accreditation integrity
available globally.

CFPP Standards

These Certified Reference Materials are for the verification of
laboratory instruments used in testing petroleum and derivative products for
Cold Filter Plugging Point (CFPP) according to IP 309, EN116 & ASTM D6371
and other equivalent test methodology.

Cloud Point Standards

Cloud Point Certified Reference Materials are for the
verification of laboratory instruments used in testing petroleum and derivative
products for Cloud Point according to IP 219, ISO 3015, EN 23015, ASTM D2500
and other equivalent test methodology.

Density Standards

Density Certified Reference Materials are for the verification
of laboratory instruments used in testing petroleum and derivative products for
density in accordance with methodology, but not limited to, such as ASTM D4052,
IP 365 and other equivalent international methodology.

Distillation Standards

Distillation Certified Reference Materials are for the
verification of laboratory instruments used in testing petroleum and derivative
products for distillation at atmospheric pressure according to ASTM D86, IP
123, ISO 3405 and other such equivalent international methodology.

Sulphur / Mercaptan Sulphur Standards

Sulphur / Mercaptan Sulphur Reference Materials are for the
verification of laboratory instruments used in testing petroleum and derivative
products for Mercaptan Sulphur to ASTM D3227 / IP 342 / ISO 3012 and also Total
Sulphur content to ASTM D5453.

Fatty Acid Methyl Ester (FAME) content

Fatty Acid Methyl Ester (FAME) Certified Reference Materials for
the calibration and verification of laboratory instruments used for the
determination of Fatty Acid Methyl Ester (FAME) content in middle distillates –
Infrared spectrometry methods such as EN 14078 / IP 579.

Flash Point Standards

Flash Point Certified Reference Materials are for the
verification of laboratory flash point instruments that are used in testing
petroleum and derivative products. These include those used for Cleveland Open
Cup, Pensky-Martens Closed Cup, Abel Closed-Cup and TAG Closed Cup.

Freezing Point Standards

Freezing Point Certified Reference Material for the verification
of laboratory instruments used in testing petroleum and derivative products for
Freezing Point to ASTM D2386, IP 16, ISO 3013 and other such equivalent
international methodology.

Fuels Testing Standards

Paragon Scientific’s range of Fuels Testing Certified Reference
Materials are for the verification of laboratory instruments used in testing
petroleum and derivative products.

Pour Point Standards

Pour Point Certified Reference Materials for the verification of
laboratory instruments used in testing petroleum and derivative products for
Pour Point to ASTM D97, IP 15, ISO 3016 and other equivalent international test
methodology.

Calibration Standards

Viscosity Standards

Manufactured in accordance with ASTM D2162, the primary method
for viscosity standards manufacture. they are dual UKAS certified to the
International Standards BS EN ISO / IEC 17025 and ISO 17034.

Certified pH Buffer Solutions

Our certified pH buffer range include solution for pH 4.00, 7.00
and 10.00 certified at either 20 °C or 25 °C, specifically used for
verification and calibration checks of pH meter instruments.

Colour Standards

These range of liquid colour standards includes AOCS-Tintometer,
ASTM, Gardner, Lovibond RYBN, Pt-Co and Saybolt Colour, the key colour scales
applied to oils, fuels & chemicals.

Density Standards

ISO 17025 / ISO 17034 certified Density standards are for the
verification of instruments used to measure density of materials which are
fluid at the desired test temperature within the range of 15 °C to 150 °C

Refractive Index Standards

Paragon Scientific produces a range of refractive index
standards for use in the calibration and verification of all types of
refractometer e.g. handheld, Abbe and high accuracy digital instruments.

$Refractive Index Standards$

Certified Ethanol Standards – % ABV (Alcohol by Volume)

ISO 17034 & ISO 17025 Certified Ethanol Standards are
designed to be used for the calibration and/or verification of alcoholmeters or
densitometers.

Relative Density Standards

Paragon ISO 17025 / ISO 17034 Relative Density standards are
designed for the calibration or verification of instruments used to measure
density and relative density of materials.

Secondary Working
Flash Point standards

Secondary Working Standards (SWS’s) are flash point standards
designed to be used on a frequent basis in order to verify test equipment
functionality on an on-going basis.

Smoke Point
Reference Fuel Blends

These products are ideal for the calibration and/or verification
of analytical instrumentation for automatic or manual measurement of smoke
point using ASTM D1322, IP 598 or other applicable methods.

Sulfur Standards

Paragon ISO 17025 / ISO 17034 Sulfur CRMs for use in quality
control procedures used for analysing sulfur content in petroleum products.

Total Acid Number (TAN) Standards

Paragon’s ISO 17025 & ISO 17034 Acid Number (AN) standards
are specifically manufactured for the verification of analytical instruments
used to determine acid number by potentiometric titration.

Total Base Number (TBN) Standards

Paragon’s ISO 17025 & ISO 17034 Base Number (BN) Standards
are specifically manufactured for the verification of analytical instruments
used to determine base number by potentiometric titration.

Viscosity Check Oils

These check oils are for the validating the performance of
Cold-Cranking Simulator and Kinematic Viscometers by measuring commercially
available formulated engine oils.

Accreditation

The United Kingdom Accreditation Service is the sole bodyrecognised by Government for the accreditation of conformity assessment against internationally agreed standards for testing, calibration, inspection and certification. UKAS accreditation demonstrates your competence as a business. It enables customers to make a confident and informed choice about the quality and reliability of the service. The UKAS mark will provide potential customers with appropriate information and knowledge, allowing them to make an informed decision in their procurement process. Accredited organisations are able to demonstrate that they will deliver accurate and reliable results.

UKAS has significant influence overseas and occupies high profile roles in international bodies which act to remove technical barriers to international trade, making it easier to sell your goods or services in potential new growth markets.

What is ISO 17025?

ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO 17034?

ISO 17034 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials (CRMs) that it produces.

Our dual UKAS accreditation to ISO 17025 and ISO 17034 provides a level of confidence and assurance that international guidelines are followed in the production, labelling, and assignment of property values to materials, including stability and homogeneity determinations.

For detailed information
on our ISO 17025 accreditation click here:
(https://www.ukas.com/wp-content/uploads/schedule_uploads/00001/0649Calibration%20Single.pdf)

For detailed information
on our ISO 17034 accreditation click here:
(https://www.ukas.com/wp-content/uploads/schedule_uploads/00014/4589%20RMP%20Single.pdf)

	Certified Reference Materials / สารมาตรฐานทางด้านปิโตรเลียม เช่น จุดไหลเท จุดเยือกแข็ง ค่าการกลั่น ค่าความหนาแน่น Our Certified Reference Materials ensures good inter-laboratory correlation. Fully Traceable to National Standards.

	Colour Standards / น้ำยาวัดสำหรับวัดค่าสีน้ำมันพืช น้ำมันปิโตรเลียม น้ำมันหล่อลื่นแบบอัตโนมัติ For routine calibration of colour measuring instruments, verification of test data and ensuring good inter-laboratory correlation.

	Density Standards / น้ำยาวัดความหนืดสำหรับวัดค่าความหนาแน่น Our Density Standards are ideal for routine calibration of colour measuring instruments, verification of test data and ensuring good inter-laboratory.

	Refractive Index Standards / น้ำยาวัดค่าความหวานในหน่วยบริกซ์ (Brix) และค่าการหักเหของแสง (Refractive Index : RI) Paragon Scientific produces a range of sucrose standards for use in the calibration and verification of all types of refractometer.

	Secondary Flash Point / น้ำยาทดสอบจุดวาบไฟตามมาตรฐาน ASTM D56, D92, D93, IP170 Typically used in, but not limited to, the analysis of petroleum products with flash points above 79°C (175°F) and below 400°C (752°F)

	Total Acid Number Standards / น้ำยาทดสอบค่าความเป็นกรด TAN Manufactured to ASTM D 664 / IP177, tested and certified at Paragon Scientific’s ISO 17025 accredited laboratories.

	Total Base Number Standards / น้ำยาทดสอบค่าความเป็นด่าง TBN Manufactured to ASTM D 2896 / IP276, tested and certified at Paragon Scientific’s ISO 17025 accredited laboratories.

	Viscosity Standards / น้ำยาวัดความหนืดสำหรับ D445 Flow Cup, Zahn Cup และ Brookfield Viscometer Paragon Scientific Limited specialises in the production of Premium Quality, Primary level, Viscosity Reference standards.

	Cold Cranking Simulator / น้ำยาวัดความหนืดแบบ CCS Standards for the calibration and verification of analytical equipment used in Cold Cranking Simulator testing to ASTM D5293.

	Cone & Plate / น้ำยาวัดความหนืดแบบ Cone & Plate The standards are especially designed for the paint and coatings industry. Dual UKAS certified to BS EN ISO / IEC 17025 and ISO Guide 34.

	Flow Cup / น้ำยาวัดความหนืดสำหรับ Flow Cup, Zahn Cup Flow Cup viscosity standards are especially designed for use in DIN, Ford, ISO, Shell and Zahn flow cups and are also dual purpose Density standards.

	General Purpose / น้ำยาวัดความหนืดสำหรับ D445 Flow Cup, Zahn Cup และ Brookfield Viscometer Manufactured in accordance with ASTM D 2162, the primary method for viscosity standards manufacture. Dual certified to both ISO 17025 and ISO Guide 34.

	High Temperature / น้ำยาวัดความหนืดสำหรับอุณหภูมิสูง These high temperature standards are tested at 135°C and 150°C, and ensure full compliance to ASTM & IP test method protocol.

	Low Temperature / น้ำยาวัดความหนืดสำหรับอุณหภูมิต่ำ These standards are widely used for the verification of viscometers at sub zero temperatures. Dual UKAS certified to BS EN ISO / IEC 17025 and ISO Guide 34.

	Medical / น้ำยาวัดความหนืดทางด้านการแพทย์ Manufactured in accordance with ASTM D 2162, the primary method for viscosity standards. Certified to International Standards BS EN ISO / IEC 17025.

	Mineral Oil Rotational / น้ำยาวัดความหนืดสำหรับ Rotational / Brookfield Viscometer These viscosity standards are specifically designed for Rotational Viscometers. Dual certified to ISO 17025 and ISO Guide 34.

	Viscometers / หลอดวัดความหนืด To determine kinematic viscosity according to ASTM D 445, ISO 3104, IP 71, and BS188.

	Hydrometers / หลอดวัดค่าความถ่วงจำเพาะ ค่าความหนาแน่น ค่าเอพีไอ (API) ของน้ำมัน Instruments used to measure the specific gravity (or relative density) of liquids.

	ASTM D86 Distillation Glassware for ASTM D86 Distillation of Petroleum Products at Atmospheric Pressure.

	ASTM D1160 Distillation Glassware for D1160 Distillation of Petroleum Products at Reduced Pressure.

	ASTM D1319 Hydrocarbon ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum.

	ASTM D97 Pour point Glassware for ASTM D97 Pour Point of Petroleum Products.

	ASTM D2500 Cloud point Glassware for the test method ASTM D2500 Cloud Point of Petroleum Products.

	ASTM D524 Ramsbottom Glassware for ASTM D524 Ramsbottom Carbon Residue of Petroleum Products.

	Corrosion & Rust Equipment used to indicate the ability of steam turbine oils to prevent rusting of ferrous components.

	Colour Measurement Colour measurement equipment used to determine the colour scale of pertroluem oils and wax.

	Flash & Fire Point Manual and automatic flash point analysers to determine the flash point of materials.

	Particulates & Composition H2S in liquids analyzer and AvCount particle counter from Seta Analytics.

	Rotational Viscometers Rotational Viscometers to measure the viscosity of liquids in accordance with international standards.

	Viscosity Baths Viscometer and calibration baths specially designed for tests that require ultra-precise temperature control.

	Refractometers Hand-held, digital and Abbe refractometers for the measurement of an index of refraction (refractometry).

	Flow Cup Calibration We are able to offer a calibration service for Flow Cups. This service includes cleaning and full recalibration of Flow Cup.

	Hydrometer Calibration We are able to offer a calibration service for Hydrometers. Available with UKAS ISO 17025 certificate of calibration.

	Thermometer Calibration We are able to offer a calibration service for Thermometer. Available with UKAS ISO 17025 certificate of calibration.

	น้ำมันมาตรฐาน สำหรับวัดค่าความหนืดที่อุณหภูมิต่างๆ พร้อมใบรับรองจากบริษัทผู้ผลิต ที่ได้รับมาตรฐาน ISO17025 จาก UKAS ครอบคุมค่าความหนืดตาม ASTM D445, Cold Cranking Simulator, Low Temperature Brookfield, Flow Cup, Zahn Cup Viscosity, Kreb Unit สำหรับอุตสาหกรรมสี เป็นต้น (Certified Viscosity Standard)

	น้ำมันปิโตรเลียมมาตรฐาน สำหรับการสอบเทียบเครื่องมือ ผ่านการตรวจสอบจากห้องทดลองที่เชื่อถือได้ไม่ต่ำกว่า 10 แห่ง (Round Robin Test) ครอบคลุมคุณสมบัติการกลั่น จุดวาบไฟ จุดไหลเท จุดขุ่นมัว ค่าความหนาแน่น จุดเยือกแข็ง ค่ากำมะถันในน้ำมัน ค่าออกเทน ค่าซีเทน ค่าการกัดกร่อนทองแดง ค่า Aniline Point ค่าความดันไอ ค่า FIA เป็นต้น ใบรับรองระบุชื่อห้องแล็ปที่ร่วมทดสอบพร้อมค่า Repeatability และค่า Reproducibility (Petroleum Round Robin Standard)

	สารมาตรฐานสำหรับวัดค่าเปอร์เซ็นต์ความหวาน (Brix Solution), ค่าการหักเหของแสง (Refractive Index) สำหรับอุตสาหกรรมอาหาร เช่น น้ำตาล น้ำผลไม้ ไวน์ เบียร์ เป็นต้น มาพร้อมกับใบรับรองการสอบเทียบจาก UKAS เพื่อรองรับมาตรฐาน ISO17025 (Certified Sucrose / Refractive Index Standard)

	น้ำยามาตรฐานสำหรับวัดค่าการนำไฟฟ้า (Conductivity Solution) และค่าความเป็นกรด-ด่าง (pH Buffer Solution) พร้อมใบรับรองสอบกลับไปที่ NIST

	หลอดแก้ววัคค่าความหนืดแบบ Capillary Viscometer ตาม ASTM D445 สำหรับตัวอย่างน้ำมันใสและทึบแสง เช่น น้ำมันดีเซล น้ำมันหล่อลื่น น้ำมันเตา เป็นต้น สามารถออกใบรับรองการสอบเทียบจาก UKAS เพื่อรองรับมาตรฐาน ISO17025 ได้ (Kinematic Viscosity Tube acc. to ASTM D445)

	ถ้วยวัดค่าความหนืดแบบ Flow Cup แบบ Zahn Cup, Ford Cup และ Shell Cup ใช้กับตัวอย่างกาว เรซิน น้ำยาเคลือบผิว น้ำมัน และสี เป็นต้น