Chilworth

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Packaging Testing Instruments for Food and Beverage, Pharmaceuticals / Cosmetics Testing January 26, 2017June 18, 2020

ผู้ผลิตเครื่องมือทดสอบและวิจัยทางด้านการรับรองมาตรฐานความปลอดภัยของผลิตภัณฑ์ (Process Safety Instruments) เช่น Auto Ignition Temperature, Dust Explosion, Gas and Vapour Flammability, Oxidising Liquid Test, Electrical Resistivity และ Electrostatic Testing

CTL01 10g Screening Tool

10g Screening Test

Functional Specification and Deliverables:

Carius oven – 110-240 V a.c /1 kW oven
Temperature controller and oven range 0 – 400 °C (ramp typical 0.5 °C)
Temperature accuracy within + / – 1 °C
Pressure range 0-100 barg. ¼” transducer connected via 1/16″ oil filled pressure link
Pressure accuracy within + / – 0.1 barg from 0-50 barg and within + / – 0.2 barg above 50 barg
Data logging – slow log rate – every 30 sec, fast log rate – every 0.1 sec standard
Carius system program and driver discs
Miscellaneous cables
Set of Carius glass tubes and miscellaneous fittings supplied as standard
Traceable calibration (master equipment – UKAS calibrated)
Tested with known calibration sample prior to delivery

CTL02 Adiabatic Dewar Calorimeter ADC II

Above: an Adiabatic Dewar Calorimeter (shown with electronic control unit & optional tempering cell for venting trials)

Above: the containment enclosure which Chilworth can also supply as an option

Functional Specification and Deliverables:

6 kW 3-phase 380 V – 415 V Dewar oven. 0 – 400 °C capability
Pressure range 0 – 100 barg. Vent relief set to 23 barg
Dewar flask set with two fully ported and populated stainless steel head assemblies (ports include potential for entry of sample thermocouple, sample pressure sensor, sample heater, stirrer motor, additional spare thermocouple)
Electronic control unit (configured to suit various test scenarios in conjunction with the supplied software) – with built in oven temperature controller (oven temperature tracks the sample temperature reliably within 1 °C or better under steady rate of rise conditions and can follow exothermic activity of sample at rates of up to 40 – 60 °C / min). Also features sample pressure and heater power local monitors, emergency manual vent for the vessel and interfacing to all ancillary Dewar services e.g system sensors and optional extras highlighted below
Personal computer and LCD monitor with ADC software pre-installed
Data acquisition card capable of monitoring and / or controlling: sample temperature, oven temperature, sample pressure, stirrer speed, stirrer torque, heater power and also optional extras such as Tempering cell pressure, tempering cell inlet and outlet solenoid operation, additional thermo-couples, Chemical injection pump, laboratory balance, Gas Burette. Typical log rates are: every 20 seconds for stan dard logging and every 0.1 second logging per channel based on the trigger point being exceeded on rate of pressure or temperature rise data
Accuracy of pressure + / – 0.1 barg to 50 barg and + / – 0.2 barg above 50 barg
Accuracy of temperature + / -1 °C
1 x instruction manual

CTL03 Gas Burette System

Above: Gas Burette apparatus Current design with U-tube mounting board

Functional Specification and Deliverables:

Mains supply: 110 – 240 V a.c
Accurate data up to approximately 5 cm3.S-1
Analogue count output and analogue pressure output (1 V or 10 V full scale selectable)
Compatible with the data acquisition system of a Mettler RC1 system or any other data acquisition system
Supplied with electronic control unit, mounting back-board, Gas Burette U-Tube, solenoid outlet valve, pressure transducer, silicon oil, glass accessories, miscellaneous tubing and cables,100 ml glass calibration syringe
1 x instruction manual

CTL04 MIE III Cloud Apparatus

MIE Cloud Apparatus (MIE III)

Functional Specification and deliverables:

Mains Supply – Volts / Amps: 110 – 240 V a.c / 3 A
Energy Range: 4 mJ – 2000 mJ
29 device capacitance bank (energy selection increments of 1 mJ)
0 – 15 kV adjustable high voltage power supply
Arc gap breakdown voltage monitoring unit utilising JCI 140 internal proximity voltmeter
Chart recorder breakdown strength monitoring software plus data-card for use with PC data acquisition package which is supplied as standard (for use with a floating laptop – not supplied)
Dust / air dispersion unit with set of acrylic Hartmann tubes with adjustable air regulator facility and rear external air inlet connection
Niacinamide calibration sample (with known calibration data)
1 x instruction manual

CTL05 MIT Cloud Apparatus

MIT Cloud Apparatus

Functional Specification and deliverables:

Mains supply: 100 – 120 V or 220 – 240 V operation
1 kW furnace heating from ambient to 1000 °C via temperature control unit
Supplied with spare glass sealing gaskets and observation glasses, set of thermocouples, new integral control unit complete with furnace temperature controller and inlet pressure meter

CTL06 20 Litre Sphere Test Apparatus

20 litre sphere test apparatus with optional lifting gear shown

Functional Specification and Deliverables:

Mains supply: 110 – 240 V a.c operation
20 litre sphere for dust explosion testing
Data control unit – interfaces with measurement piezoelectric sensors via charge amplifiers and sends pressure and control data to / from PC
Ignitor initiation unit – sends ignite signal to chemical ignitors and also filters the air and contains air inlet lines
Set of spare parts
1 x instruction manual

CTL07 Portable Explosion Kit

Portable Explosion Apparatus

Functional Specification & Deliverables:

Powder dispersion unit with acrylic Hartmann tube
Mains supply: 110 – 120 V / 220 – 240 V a.c – 200 W
8.5 kV / 0.25 mA constant arc internal ignition source
Hand-held control handset for arc activation and air dispersion
Double action hand pump for pre-charging the internal air reservoir
Rupture paper disc set
Air line
Electrodes
Built in air regulator – typical default setting 4 barg
Lightweight at just 10 kg and packed into robust case
1 x instruction manual

CTL08 Group A/B Flammability Screening Lab

Group AB Flammability Screening Laboratory Rig

Functional Specification & Deliverables:

Mains supply: 110 – 240 V a.c / 3 A
Dust / air dispersion base complete with steel mushroom for dust cloud optimisation – typically 7 barg service air required
1 litre acrylic Hartmann Tube (can be cleaned with warm soapy water and dried)
Tube rupture papers (for top tube closure)
Brass electrodes for creating arc
Constant arc power source (10 kV)
Remote handset (arc and air activation)
1 x instruction manual

CTL09 Hartmann Pressure Tube Apparatus

Hartmann Pressure Tube Apparatus

Functional Specification & Deliverables:

Mains supply: Volts 110 – 240 V a.c / 3 A
Dust / air dispersion base with mushroom design to optimise internal dust cloud
1.2 litre stainless steel Hartmann Tube
Top removable screw cap with built-in dynamic pressure transducer and vent valve
Viewing window (for visual observation of arc gap and flame propagation)
Brass Electrodes
Constant arc power source (10 kV)
Remote handset (arc & air activation)
PC / LCD monitor with control and acquisition software included
Electronic control unit containing high speed data acquisition card and pressure transducer charge amplifiers
O’ring set
High speed pressure transducer
1 x instruction manual

CTL12-13 Aerated & Diffusion Cell Screening Apparatus

Figure 1: Aerated cell with pre-heated air (top entry) Figure 2: Powder aerated cell set-up

Functional Specification & Deliverables:

Mains supply: Volts 220 V – 240 V a.c / 7 A or 120 V a.c / 13 A
30 litre fan assisted oven (400 °C capability)
Air flow meter fitted (adjusts flow through the pre-heating coil). Typical air flow is set to 0.6 l.min-1
Temperature controller (ramps oven at 0.5 °C.min-1)
Glass test vessel set each comprising cylinder closed at the base and top with sintered glass and a close fitting lid for aeration cell tests
Thermocouples for monitoring oven temperature at several places within the powder layer within the vessel (see figure 2)
Data acquisition software program (pre-installation on optional PC recommended) for conducting either the aerated cell test (with lid) or the diffusion cell test (no lid)
Thermocouple extension cables
Glass vessel support stand with pre-drilled thermocouple securing holes for repeatable alignment of thermocouples
1 x instruction manual

CTL14 Basket Test Apparatus

Basket Test Apparatus

Functional Specification & Deliverables:

Oven: 0 – 400 °C fan assisted with PID temperature controller
Mains supply: 220 – 240 V single phase / 7 A or 120 V single phase / 13 A
Thermocouples: K type, 1 metre long. Oven and sample
Reaction vessels: 1 set stainless steel mesh basket cubes 50 mm / 75 mm / 100 mm* (more can be supplied as spares) – 0.053 mm opening
Sample support: Outer spot welded basket which permits air flow circulation to / around inner basket cubes
Miscellaneous items: Manuals, catchment tray
Data acquisition card & software: Basket test apparatus data acquisition software which can be pre-installed on the recommended optional PC / monitor

CTL15 Layer Ignition Temperature Apparatus

Layer Ignition Test Apparatus

Functional Specification & Deliverables:

Layer Ignition Hotplate (1250 W / 6 A, 220 – 240 V (100 – 120 V via transformer option) single- phase. Temperature range = 0 – 400 °C
Remote controller unit (incorporates PID temperature control). Sample may be ramped in temperature or held isothermally
K-type thermocouple and extension cable for both hotplate and sample
5 mm, 12.5 mm, 15 mm sample retaining rings supplied (100 mm diameter)
Data acquisition hardware and software
Acrylic sealing compound.

CTL16 Flammability of Solids – Burning Rate Apparatus (UN Test)

Layer Ignition Test Apparatus

Functional Specification & Deliverables:

Fire Train forming mould with anodised aluminium 90° Vee groove former, support cradle, base plate and brass holding clamps
Test Plate. Impervious, non-combustible and low thermal conductivity quartz testplate
An ignition source is required but is not supplied due to the documentation and certification required to ship a gas cylinder overseas. A small portable hand held butane or propane cylinder with a nozzle diameter of greater than 5mm is all that is required
Metric rule for measuring Fire Train distances
High grade non-rusting steel rule marked in millimetres complete with UKAS calibration certificate
Laboratory stopwatch for timing combustion and linear burning intervals

CTL17 Oxidising Solids Test Apparatus

Oxidising Solids Test Apparatus

Functional Specification & Deliverables:

Mains supply: 220 – 240 V mains inlet / 12 V d.c output 150 W hot coil power source
1 x glass conical sample loading chamber (glass blown with 60° angle for optimal powder cone as per test standard requirements)
1 x insulated quartz plate
1 x roll 100 m NiCr wire (0.5 mm diameter)
1 x stop watch
1 x instruction manual

CTL19 Auto Ignition Test Apparatus (AIT)

Auto Ignition Test Apparatus

Functional Specification & Deliverables:

The ASTM Method spec is covered here. For DIN standard apparatus deliverables please contact us.

Mains supply: 220 – 240 V 50 Hz single phase furnace (other voltages are available)
150 – 650 °C (standard operating range)
Capable of controlling the flask temperature within + / – 1 °C up to 350 °C and + / – 2 °C from 350 °C to 650 °C
Temperature uniformity is better than + / – 4 °C measured on the outside of an aluminium clad flask at three positions
10 x round bottom borosilicate flasks
Data acquisition hardware and AIT software supplied
Supplied with vapour temperature thermocouple, spare thermocouple and sample injection syringe set
Pre-calibrated
1 x instruction manual

CTL20 Flammable Range Test Apparatus

Flammable Range (LFL/UFL) Apparatus

Functional Specification & Deliverables:

Flammable range fan assisted oven 220 – 240 V a.c typically 1.5 kW / 7 A (110-120 V a.c versions are possible)
Temperature rating 0 – 300 °C (test operating temperature limited to 150 °C due to the PTFE head assembly)
Safety glass window in door
Magnetic stirrer drive
New integral oven controller including pressure reader, temperature reader and oven controller. Also includes stirrer controller and arc controller ignition source and activation handset
1ml, 3 ml, 5 ml and 10 ml disposable syringe sets supplied to get you started
500 µl syringe with needle
5 litre glass test vessel
1 x vacuum pump + 6mm inlet line & exhaust hose
Vacuum pump inlet filters, plastic-coated magnetic stirring bars
1 x remote handset for constant arc activation
2 x 5 litre covers /head assemblies with ports for sample injection, electrodes, thermocouple, vacuum / exhaust line(s) with needle valve isolation and transducer connection (complete with cover clamps)
1 x pressure transducer -1 to 1 barg
1 set x 5 litre head rubber seal gaskets
1 set x septums for injection line connection
1 x length of tungsten constant arc electrode wire
1 x T-Piece fitting
1 x 5 litre vessel support stand
1 x 5 litre vessel stirrer extension rod
2 x mains supply leads
Comprehensive English instruction manual complete with pressure and temperature calibration and monitor manuals

CTL22 BAM Fallhammer Test Apparatus

Flammable Range (LFL/UFL) Apparatus

Functional Specification & Deliverables:

A solid cast steel base block
Main 100 mm diameter anvil
A centring ring for locating the intermediate anvil on the main anvil
2 x Intermediate 26 mm diameter anvils
2 x locating rings with orifices for gas release
200 steel cylinders (roller bearings)
50 rubber o’rings for steel cylinders (liquid testing only)
100 steel collars for steel cylinders locating
An upper to lower cylinder distance gauge for 1 – 2 mm sample gap required for liquids
A central column with guides (graduated scale) ready set for correct height
A 1 kg drop weight carrier assembly
A 1 kg weight already fitted to 1 kg drop weight assembly for a 2 kg overall weight
A 5 kg drop weight carrier assembly
A 5 kg weight already fitted to 5 kg drop weight assembly for a 10 kg overall weight
A drop weight electromagnetic release device
An electromagnetic power supply distribution box together with electroma gnet 12 V supply cable, 100 – 120 V, 220 – 240 V mains inlet supply cable and remote handset for weight release
Electromagnet safety pin
A 40 mm3 sample loading spatula
A polycarbonate protective shield
1 x instruction manual

CTL23 BAM Friction Test Apparatus

BAM Friction Apparatus

Functional Specification & Deliverables:

The apparatus and accessories supplied are as follows:

1 x Friction Tester assembly complete with base plate, cam assembly with sliding carriage, motor drive ( 220 / 240 V / 50 Hz or 100 / 120 V 60 Hz), peg locating device, counterbalance arm and operating switch box
1 x loading arm with 9 notches for weight location
1 set (400 pce) porcelain pegs
1 set (100 pce) porcelain plates
1 x 0.28 kg load weight (Weight 1)
1 x 0.56 kg load weight (Weight 2)
1 x 1.40 kg load weight (Weight 3)
1 x 2.79 kg load weight (Weight 4)
1 x 5.58 kg load weight (Weight 5)
1 x 8.34 kg load weight (Weight 6)
The weights above allow coverage of the desired 5 – 360 N load range
1 x counterbalance weight
1 x instruction manual
1 set calibration graphs for load weight locations
All apparatus supplied by Chilworth is provided with a warranty (excluding consumables)

CTL24 Koenen Tube Test Apparatus

BAM Friction Apparatus

Functional Specification & Deliverables:

The apparatus and accessories supplied are as follows:

Support frame with 4 burners and solenoid valve (Propane Gas inlet)
Complete set of Orifice plates comprising of the following sizes: 1, 1.5, 2, 2.5, 3,3.5 ,4,5 ,6 ,8 ,10 ,12 ,14 ,16 ,18 & 20 mm
Collar assembly including 2 sizes
100 disposable Koenen tube shells
Length of gas inlet hose
Remote handset for gas inlet valve and ignitor activation
4 x electrical ignitor fitted and 8 x spares
Koenen tube support rod spares x 2
Spare Teclu burner set (4 total)
1 x 1 mm diameter k-type thermocouple + thermocouple extension cable
Data acquisition card / program for monitoring heat-up during initial burner set-up
Stopwatch

CTL25 Time / Pressure Apparatus

Time / Pressure Test Apparatus

Functional Specification & Deliverables:

PC – current up-to-date specification (it is recommen ded that this is supplied as standard)
LCD monitor
Time Pressure Control Unit with push button initiation of logging of data and ignition system
Time Pressure – pressure monitor and ignition power supply unit 220 – 240 V / 10 A
Time Pressure Vessel and stand
Pressure Transducer (0 – 25 barg / 0 – 362.5 Psig)
Igniter output cable
Data communication cable
Spanner for vessel end cap maintenance
1 set Aluminium burst disks (100 pcs)
1 set Lead washers (200 pcs)
Time pressure documentation
Time pressure software program

CTL26 Floor Glove & Footwear Kit

Floor, Glove and Footwear Test Kit (static measuring options available)

Functional Specification & Deliverables:

Resistance meter – Maximum range > 200 G? (UKAS Calibration Certificate supplied)
Brass hand electrode with pre-fitted 10 K? safety resistor installed 25 mm diameter x 160 mm
2 x stainless floor electrodes with conductive rubber pads, each 63.5 mm dia x 105 mm = 2.5 Kg
PTFE backing sheet – 300 mm x 470 mm x 3 mm
Aluminium floor plate – 300 mm x 470mm x 2.5 mm
1G? calibration check resistor
5 metre earth lead
Miscellaneous other leads (for resistance meter)
Instruction manual

CTL27 Liquid Conductivity Test Apparatus

Liquid Conductivity Test Apparatus

Functional Specification & Deliverables:

10 V d.c power supply (resolution 0.1 V, accuracy + / – 2 %)
Picoammeter (2 nA to 20 mA ranges) – 2 nA range has 10 fA resolution + / – 400 fA. Noise 20 fA. (Manufacturer’s calibration certificate supplied)
Custom manufactured liquid conductivity test cell
Miscellaneous.cables (transorb in-line overvoltage protection unit – protects sensitive measuring equipment from over voltage
Instruction manual

CTL28 Powder Resistivity Test Apparatus

Powder Resistivity Test Apparatus

Functional Specification & Deliverables:

Custom manufactured power supply with 500 V, 1 kV, 2 kV, 3 kV (fixed settings) and 0 – 10 kV (adjustable settings for other uses requiring higher voltages)
Accuracy + / -1 V on 500 V range, + / – 10 V (all other fixed settings), within + / – 100 V with 10 kV applied on the 0 – 10 kV adjustable range. Maximum current draw from power supply 500 µA
Minimum resistance measurement possible is approximately 1 – 2 M? (resistivity ca 400 k?.m) – dependent on sample properties and power supply voltage output tolerances
Custom manufactured test cell with guard ring electrode incorporated
Picoammeter for measurement of current through or across the test sample (2 nA to 20 mA ranges) – 2 nA range has 10 fA resolution + / – 400 fA. Noise 20 fA. Manufacturer’s calibration certificate supplied
Miscellaneous cables
In-line Transorb over voltage protection unit (for protecting the sensitive pico-ammeter from over voltage)
Powder resistivity apparatus instruction manual

CTL29 Protective Clothing Surface Resistivity Test Apparatus

Surface & Volume Resistivity Test Apparatus

Functional Specification & Deliverables:

Terra Ohmeter spec
BS EN1149 Protective Clothing Surface (volume resistivity test cell)

CTL30 Gas Probe Incendivity & Calibration Apparatus

Gas Probe Incendivity & Calibration Apparatus

Functional Specification & Deliverables:

Gas probe with manual quick release gas shut-off valve and gas mixing shroud
Gas mixing unit with 2 x gauges: one for air (rotometer) and one for gas (digital mass flow meter with pre- calibrated gases selectable in memory – default is Propane). Total gas flow to the gas probe must be 0.21 litres / sec + / – 0.04 litres / sec (ref: IEC 61340-4-4)
A 10 kV custom manufactured calibrated power supply unit with fixed 500 V, 1 kV, 2 kV, 3 kV and adjustable 0 – 10 kV front panel controls. 220 – 240 V / 100 – 120 V a.c input 10 kV output (500 µA) LED display read-out of high voltage output
A calibration document for the 10 kV power supply included (master calibration equipment UKAS calibrated)
A capacitance charging unit with electrode
Instruction manual

CTL32 Powder Chargeability Test Apparatus

Powder Chargeability Test Apparatus

Functional Specification & Deliverables:

Custom made stainless steel Faraday cage and drum
Supply of powder collection bags
Electronic Manometer
Electrometer
Variable speed conveyor belt system (transit time of belt typically set to 30 S)
1 stainless steel, 1 glass, 1 polypropylene tube for powder transit
Sets of leads for measurement apparatus
Baseplate – chargeability components already pre-mounted for ease of installation
Stainless steel funnel and support stand
Stopwatch
Inline orifice plate for system outlet – already fitted
Test instruction manual detailing installation, commissioning, test procedure and routine maintenance
Industrial vacuum suction device with Hepa filter installed
Industrial vacuum suction device variable speed controller – already fitted
Miscellaneous instruction manual for Electrometer (on cd), manometer and stopwatch
Fittings for the drum inlet and outlet (already fitted)

CTL34 Five-Litre Sphere Flammability Apparatus

5 Litre Sphere Apparatus

Functional Specification & Deliverables:

0-150 °C operation
Custom fabricated stainless steel 5 litre spherical vessel (ported to accept pressure transducers). Hydro-tested to 42 bar. Complete with certificate of conformity, hydro-test certificates, test gauge calibration certificates, hydro- test procedure
Explosion chamber head custom fabricated and ported for liquid injection, vacuum, exhaust, nitrogen inlet, thermocouple and pressure link
Arc ignition source / high voltage output ignition source. Operated via remote push-button on control box once vaporisation of the liquid sample has occurred
Pressure measurement system electronic timer circuit built in to charge amp enclosure control box to initiate charge amps following ignition
Oven enclosure. Capacity: approx 60 litres
Mains supply: 100 – 120 / 220 – 240 V single phase. Fan assisted with built in bottom stirrer
PID temperature controller and digital pressure display
Safety feature: Oven vent (N.B that testing should be conducted in a room facility with extraction)
Pressure transducers – fast response 10 kHz
Data acquisition – fast response data acquisition time resolution linked in to PC for accurate data logging

CTL38 Self Accelerating Decomposition (SADT) Test H4 Apparatus

SADT & UN Test Apparatus

Functional Specification & Deliverables:

0-150 °C temperature range (110 – 120 / 220 – 240 V a.c oven typically 1.5 kW)
Efficient flask holder / stand with minimal thermal influence on test
Custom made vessel plug / head – fast set-up
Data acquisition system provides fast and early indication of any exothermic onset
Debris collection fine wire mesh basket cage system – enables management and containment in the event of any flask breakages
USB Connectivity (computer option available)

CTL39 10 kV Power Supply

Chilworth 10 kV Power Supply

Functional Specification & Deliverables:

Voltage settings : 500 V, 1 kV, 2 kV, 3 kV fixed 0-10 kV adjustable
Current output capability : 500 µA
Mains input : 100 – 240 V a.c 1 A
LCD display – Resolution : 10 V on 500, 1 kV, 2 kV, 3 kV ranges: 100 V on 0 – 10 kV adjustable range

(Above 3 kV)

CTL43 Dutch Pressure Vessel Test

Dutch Pressure Vessel Test

Functional Specification & Deliverables:

Custom Dutch Pressure Vessel – stainless steel, type AISI 316
Teclu burner
Orifice plates – complete set of 8 including: 1.0, 2.0, 3.5, 6.0, 9.0, 12.0,16.0, 24.0mm. Thickness 2.0mm + / – 0.2mm
Aluminium bursting discs – set. Diameter 38mm. Rated Burst pressure 620 + / – 60 kPa at 22 °C
Stopwatch

CTL44 Electric Spark Tester

Electric Spark Tester

Functional Specification & Deliverables:

Electric Spark Tester: electrical control and ignition system mounted within 19″ rack
Mains supply : 220 – 240 V a.c single phase power
Set of polythene strips and high voltage electrodes supplied as standard
Instruction manual
Top vent which can be connected to room extraction
Safety features: door interlock and electrode earthing
Newly designed enclosure, latched side access panel to aid cleaning

CTL47 Rotary Friction Test Apparatus

Rotary Friction Test Apparatus

Functional Specification & Deliverables:

Rotary Friction Tester complete with integral control system
Power requirements: 220 – 240 V a.c single phase power supply
Air requirements: clean air supply at 80 psi (standard clean / filtered compressed air supplies (a standard clean 7 barg standard compressed air pressure supply is acceptable regulated down to 80 psi)
Set of grit blasted wheels and sample blocks to get started (see options)
Sample grit blasting block
1 x instruction manua

CTL51 Sustained Combustibility Test Apparatus – UN Test

Sustained Combustibility Test Apparatus

Functional Specification & Deliverables:

1 x 1250 W hotplate (200 mm diameter) 220 – 240 V / 6 A
1 x remote control unit with integral PID temperature controller
1 x interface control cable (which interconnects the remote unit to the hotplate)
1 x thermocouple extension control cable
1 x sustained combustibility test cell (installed and fixed onto the hotplate)
1 x test cell temperature thermocouple (1/16″ pocket)
1 x handheld digital k-type thermocouple reader with UKAS calibration
1 x set miscellaneous cables
1 x stopwatch
1 x instruction manual

CTL52 Flammability of Gases Test A11 Screening Apparatus

Flammability of Gases Test Apparatus

Functional Specification & Deliverables:

1 x 15 kV constant arc power source
1 x gas flow meter base plate with ignition and timer control
1 x pair non return valve and pre-mixing chamber and isolation valve pre-fitted to gas flow meter base plate
2 x gas mass flow meters (gas flow meter digital pre-programmed gases)
1 x power adapter unit for gas flow meters
1 x set glass tube sealing membrane
1 x flexible gas tube
1x glass test tube (quick tube bayonet release mechanism fitted)
1 x instruction manual

CTL56 Burning Behaviour Test Apparatus – VDI Method

Burning Behaviour Test Apparatus

Functional Specification & Deliverables:

1 x platinum hot coil current control unit
1 x heater power handset (pre-wired into the control unit)
1 x insulating block
1 x glass tube
1 x 100 mm length of platinum wire
100 – 200 V / 220 – 240 V – 6 A input
Fine coil output current control (optimum 29 to 31 A. Control derived from low voltage d.c output)
1 x instruction manual

CTL57 Oxidising Liquids Test Apparatus

Oxidising Liquid Test Apparatus

Functional Specification & Deliverables:

1 x test vessel complete with integral pressure transducer side arm assembly, ignition electrodes / plug and burst disc mounting connection
1 set of 100 aluminium burst discs (consumable / spare parts)
1 x ignition power control unit with built in pressure monitor
1 x ignition control and acquisition unit (with integral data acquisition / control cards)
Remote operation. Power supply with 10 A capability
1 x 100 m Nickel Chromium wire (consumable part)
200 x lead washers for sealing (consumable parts)
1 x pressure transducer : 0 – 362.5 psig range. Accuracy = within + / – 1 % of full scale reading
1 x side arm with vent valve for leak detection purposes (spare)
Cables and miscellaneous connectors
1 x instruction manual
1 x PC (of current up to date specification, complete with oxidising liquids software pre-installed)
1 x LCD monitor
1 x oxidising liquids test programme

Conostan / SCP

asithailand Petroleum & Petrochemical Testing Instruments January 26, 2017June 18, 2020

Conostan / SCP เป็นผู้ผลิตสารมาตรฐาน น้ำมันมาตรฐานสำหรับการสอบเทียบ การสร้าง กราฟ เครื่อง AA, ICP, XRF เพื่อวิเคราะห์ค่าธาตุต่าง ๆ ในน้ำมัน เช่น กำมะถัน คลอรีน ค่าโลหะหนัก สามารถเลือกชนิดของน้ำมันได้ เช่นน้ำมันเตา น้ำมันหล่อลื่น น้ำมันดีเซล เป็นต้น นอกจากนี้ ยังมีสารมาตรฐานสำหรับวัดขนาดอนุภาคสำหรับเครื่อง Particle Analyzer
Download Catalog: NEW – Product Brochure

PRODUCT SUMMARIE
Viscosity Standards น้ำยามาตรฐานสำหรับวัดค่าความหนืด

General Purpose Viscosity Reference Standards manufactured in accordance with ASTM D 2162. All standards are traceable to National Standards and according to ASTM & IP methods.

Sulfur Standards น้ำมันมาตรฐานสำหรับสอบเทียบกำมะถันในน้ำมันเตา ดีเซล หรือไอโซออกเทน เป็นต้น สำหรับการสร้างกราฟเครื่อง X-Ray Fluorescence (XRF)
Download Catalog: Sulfur Standards Flyer (PDF, 779KB)

A new line of Sulfur in Residual Oil and Sulfur in Isooctane Standards are available. This line features stocked standards from 5 ug/g to 50,000 ug/g, ability to customize standards as low as 1 ug/g, and non-hazardous shipping charges.
Sulfur in Mineral Oil

Sulfur in Residual Oil

Sulfur in Isooctane

Elements in Oil/Spectroscopy Products สารมาตรฐานปริมาณโลหะในน้ำมันรสำหรับสร้างกราฟเครื่อง AA, ICP, DCP, XRF, Rotrode เป็นต้น

Calibration and analysis products for analysis of Elements in oil and other organic liquids using AA, ICP, DCP, XRF, Rotrode and other analytical instruments.

Download Catalog: View Single Element standards Flyer (PDF – 345KB)

D-Series® Products สารมาตรฐาน D3, D12, D-19-0, D19

For Military “Spectrometric Oil Standards” Requirements – D-Series® Blends D3, D12, D-19-0 and D-19.

Chlorine in Oil สารมาตรฐานคลอรีนในน้ำมัน

Seven stocked concentrations of Chlorine in mineral oil from 10 to 50000ppm in 100g bottles.

PremiSolv™ ICP Solvent ตัวทำละลายสำหรับการเตรียมสารมาตรฐานสำหรับเครื่อง ICP / น้ำมันสำหรับตัด Blank หรือค่าศูนย์ Base, Blank Oil และ Stabilizer เป็นต้น

Alternative solvent to replace Kerosene or Xylene for ICP Analysis. Certified extremely low metal content with no sulfur/aromatic odor. Non-Hazardous for shipping/disposal.
Download Catalog: View PremiSolv flyer (PDF)

PartiStan™ Automatic น้ำยาสอบเทียบขนาดอนุภาคตามมาตรฐาน ISO 11171

Particle Counter Standards
Calibration/verification of particle counters by ISO method 11171.
PartiStan™ 2806 traceable to NIST SRM 2806 and prepared according to Annex F.
Initial 11171 calibration fluids available.

AA, ICP, XRF อะไหล่สิ้นเปลืองสำหรับ AA, ICP และ XRF เป็นต้น
CONOSTAN® offers consumables with the help of its parent company, SCP SCIENCE

Control Company

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments January 26, 2017June 18, 2020

เครื่องมือทดสอบสำหรับห้องปฏิบัติการทั่วไป เช่น เครื่องวัดค่าอุณหภูมิ ความชื้น ความดันบรรยากาศ ระดับการส่องสว่าง เครื่องวัดค่าความเร็วรอบ นาฬิกาจับเวลา เครื่องคิดเลขทางวิทยาศาสตร์ เครื่องมือ อุปกรณ์ทั่วไปสำหรับห้องปฏิบัติการ เป็นต้น บริษัทผู้ผลิตได้รับมาตรฐาน ISO9001 และ ISO17025 เครื่องมือที่สั่งซื้อมีใบรับรอง ISO17025 มาพร้อมกับเครื่อง (ตรวจสอบรายละเอียดสินค้าตามลิงค์ด้านล่าง)

Download รายละเอียดเครื่องวัดค่าความดันบรรยากาศ เครื่องวัดค่าความชื้นสัมพัทธ์ (Barometer & Humidity)
Download รายละเอียดเครื่องวัดค่าการนำไฟฟ้า และสารสอบเทียบมาตรฐาน (Conductivity Meter & Conductivity Standard)
Download รายละเอียดเครื่องวัดค่าอุณหภูมิแบบดิจิตอล (Temperature)
Download รายละเอียดเครื่องวัดค่าความเร็วรอบ เครื่องวัดค่าการไหลของลม เครื่องวัดค่าความสว่าง และอื่น ๆ (Tachometer, Aneometer, Sound Meter, Light Meter)
Download รายละเอียดนาฬิกาจับเวลา (Timer, Stopwatch, Clock)
Download เครื่องมือวัดทั่วไปและอุปกรณ์ (Tool)

เครื่องวัดความเร็วลมและอุณหภูมิ – Anemometers
	3650-3652 Traceable? Vane Anemometer Pens	Three units provide for airflow/temperature; airflow/temperature/humidity/dew point, and airflow/temperature/humidity/dew point/barometric pressure.
	3655 Traceable? Micro-Anemometer/Therm.	Ultra compact micro-design is small in size, and big in features
	4090 Traceable? Digital Anemometer	Shows airflow in ft/min and m/s. Accuracy is 1%. Features include Min/ Max memory; hold function, and 2- or 16- sec. average.
	4091Traceable? Digital Anemometer with Therm	Measures air velocity/temperature in hoods and outside environments. Displays even slight gas movement in ducts.
	4330 Traceable? Hot Wire Anemometer	Probe extends in length for greater reach. Eliminates friction error caused by “moving parts” in wind vanes. Computer output.
	4331 Traceable? Anemometer/Thermometer	Measures air velocity and temperature. Extra-large LCD.
	4332 Enviro-Meter?	Provides in a single handheld package an anemometer, humidity meter, light meter and two thermometers.
เครื่องวัดค่าความดันบรรยากาศ อุณหภูมิ ความชื้นสัมพัทธ์ – Barometers
	1870 Traceable? Digital Barometer Module	Altitude adjustment for exact barometric readings. Four-line LCD shows all current readings.
	4197,4195 Traceable?Compact Digital Barometer	Measures atmospheric pressure, graphically displays the barometric trend, RH and temperature.
	4198 Traceable? Hand Held Digital Barometer	eatures include altimeter, barometer, thermometer, stopwatch, and weather forecasting.
	4199 Traceable? Precision Dial Barometer	Dial displays three scales: millibars, millimeters of mercury and inches of mercury.
	4245 Traceable? Workstation Digital Barometer	Instantly displays, barometric pressure, trend graph, and temperature– Perfect for workstation or desktop.
เครื่องวัดค่าการนำไฟฟ้า และสารสอบเทียบ – Conductivity
	4063 Traceable? Conductivity Meter	All in one conductivity meter. Temperature, Ohms, mhos, TDS, PPM, On/off Temperature compensation.
	4065-4270 Traceable? Conductivity Standards	16 ounce bottle, compatible with all meters.
	4070 Traceable? Conductivity Meter	Computer and recorder output. Replatinizing current.
	4163 Traceable? Bench Conductivity Meter	Computer and recorder output. Replatinizing current.
	4167 pH/Conductivity Univ. Flow-Thru Adaptor	Universally designed. Constant monitoring.
	4168 Traceable? Pure Water Tester	Easiest meter to operate. Tests reagent grade water.
	4169 Traceable? Dual-Display Conductivity	Simultaneously displays conductivity and temperature readings.
	4170 Redi-Stor Probe Storage Solution	Solution for storing conductivity probes. Insures probes respond instantly.
	4172-4271 Traceable?One Shot?Conductivity Sta	Eliminates external contamination by performing calibration in a vial.
	4360 Expanded Range Conductivity Meter	Conductivity meter automatically selects the proper range and displays the exact answer without hassles.
	4365 Traceable? Cond./TDS/Salinity Meters	Three units provide for conductivity; conductivity/total dissolved solids; and salinity.
อุปกรณ์ควบคุมการทำงาน อุปกรณ์ตั้งเวลาปิด-เปิด – Controllers
	4130 Traceable? Temperature Controller	Automatically turns equipment on/off at set temperatures. Includes a time controller.
	4190 Traceable? Humidity Controller	Turns equipment on/off at RH set point. Three-button operation is easy and fast.
	5010 Traceable? Lab Controller	1568 On/Off switchings. Set countdown On/Off switchings.
	5050 Traceable?Timer Switch Controller	Program up to 196 switchings per week. Digital display. Battery backup.
	5055/56 24-Hour & Traceable? 7-Day Controller	Eight outlets. Pins constantly display all time settings. Raise or lower pins to set trip times.
	5057-5058 Traceable? Walkaway Controllers	Switch equipment on/off instantly with manual override.
	5060, 5070 24-Hour/7-Day Controller	Easy to use. Set any 15-minute increment or 2-hour increment. Repeats daily or weekly.
	5090 Traceable? Outlet Controller	14 Switchings per day, up to 196 switchings per week.
	5095 Traceable? Countdown Controller	Turns any piece of equipment on or off at the end of a set time. Nicad backup battery.
เครื่องนับจำนวน – Counters
	3125 Hand Tally Counter	Easy-to-use, four-digit unit records up to 9999. Numbers instantly and automatically return to zero.
	3127 Digital Counter	Counter reads to 99,999. Water-resistant. ABS plastic case. Tactile click buttons.
	3129 Digital Key-Chain Wristband Counter	Reads to 99,999 and has a button click for count confirmation and recessed “no accident” reset.
	3130-3132 Touch Counter	9999-digit counter. One-touch operation simultaneously counts and makes a mark.
	3133 Counter Pen	Reads to 99,999 and is a combination marker and digital counter designed for the lab and plant.
เครื่องวัดค่าความชื้นสัมพัทธ์ – Humidity
	4082 Traceable? Memory Humidity/Temperature	Displays ambient and probe temperatures. Remembers high/low readings. LCD digits are 1/2 inch high.
	4080, 4085 Traceable? Hum./Temp./Dew Point	Fast response model, displays 0.01% RH and temperature.
	4087 Traceable? General Purpose Hygro./Therm.	Simply point and read the result. Humidity range of 10.0 to 95.0%.
	4088 Traceable? Hygrometer/ Thermometer	Self-contained. Requires no adjustment or maintenance.
	4093 Traceable? Humidity/Temperature Pen	Memory recall, 30-Second response time, 3/4-inch-high display, Humidity/Temperature Pen with memory makes it easy to monitor any location
	4094-4096 Traceable? Digital Hum./Temp. Meter	Shows the exact air conditions. Memories store min/max readings. Range is 25 to 95% RH.
	4154 Traceable? RH/Temp. Monitor w/Alarm	Remote humidity and temperature sensor with high/low alarms and min/max memories.
	4180, 4181 Traceable? Printing Hygro./Therm.	Provides permanent hard-copy results. Answers in less than 10 seconds.
	4184 Traceable? Jumbo Hum./Temp. Meter	External thermometer probe with a 10-foot cable. Display is updated once per second.
	4185, 4385 Traceable? Memory Hygro./Therm.	Temperature and relative humidity, 10.0 to 95.0% RH and 0.0 to 199.9°F and –18.0 to 93.0°C.
	4186 Dial Hygrometer/Thermometer	Provides humidity and temperature readings in an easy-to-read dial format.
	4187 Traceable® Humidity /Thermometer Meter	Analog Recorder Output. Humidity range is 10.0 to 95.0% RH. 100 hours of continuous readings.
	4189 Traceable® Humidity /Thermometer	Hygrometer/Thermometer with computer output. Min/Max memories.
	4192 Traceable® Humidity-On-A-Card	Easy-to-read humidity cards indicate both the current humidity and the maximum humidity attained.
	4247 Traceable®Hygro/Therm/Baro/Dew Point Pen	Measure temperature, humidity, barometric pressure and dew point in the palm of your hand. At the press of a button, unit recalls minimum/maximum readings.
	4332 Enviro-Meter™	Provides in a single handheld package an anemometer, humidity meter, light meter and two thermometers.
	4380 Traceable®Hum./Therm. with Remote Sensor	Radio-Signal Remote. Read humidity and temperature from 100 feet away. Reads up to three modules.
	4392 Traceable®Pocket Dew Point/Hygro./Therm.	Shows humidity, dew point, and temperature. Not affected by condensation.
	4410 Traceable® Wet-bulb/Hum./Temp. Alarm	Shows humidity, dew point, and temperature. Sounds high/low alarms. Provides minimum and maximum memory readings.
เครื่องวัดค่าความสว่างของแสง – Light Meter
	3248 Traceable® Pocket Digital Light Meter	Bright 1/2-inch-high digits make it an easy to read pocket light meter.
	3247 Traceable® Light Meter Pen	Designed for intuitive, easy operation by everyone.
	3251Traceable® Dual-Range Light Meter	Reads both lux and foot-candles. Analog output of 0.1 millivolt per digit.
	3252 Traceable® Dual-Display Light Meter	Displays lux or foot-candles. Serial RS-232 output. Recalls highest, lowest and average readings.
	3253 Traceable® Ultraviolet Light Meter	Displays readings in uW/cm2 and mW/cm2. Serial RS-232 output. Recalls highest, lowest and average readings.
เครื่องวัดค่าแรงดันและระดับสุญญากาศระบบเปิด – Manometers – Manometers
	3460-3469 Traceable® Manometer/Vac. Gauge	Differential feature permits reading the difference of the pressure or vacuum between two different sources.
แว่นขยาย – Magnifiers
	3350-3352 Illuminated Magnifier	Magnifiers provide an in-focus and highly defined view of surface details and illuminating uniformly.
	3355, 3356 Illuminated Microscope	Pocket Microscope magnifies view. Case is chemical- and shock-resistant ABS plastic.
	3357 Magnifier Lamp	Convenient front handle provides fingertip control to rise, lower, and pivot.
	3430-3436 Hands-Free™ Fold-up Magnifiers	Perfect focus with zero distortion. Portable with a scale on the base for measuring.
เครื่องวัดค่าความชื้น – Moisture
	4310 Traceable® Moisture Meter	Displays material, wood, wood product, and paper moisture content 9.0 to 30.0%. Features memory.
เครื่องวัดค่าออกซิเจน – Oxygen Meter
	4319 Traceable® Dissolved Oxygen Pen	Measure dissolved oxygen pen reads to 100% air saturation in the palm of your hand.
	4320 Traceable® Dissolved Oxygen Meter	Displays oxygen concentration in air and in solution. RS-232 output.
เครื่องวัดแรงดันและระดับสุญญากาศระบบปิด – Pressure/Vacuum
	3165, 3166 Traceable® Pressure/Vacuum Gauge	Eight measuring ranges. Use with all gases and liquids compatible with 316 stainless steel.
ปั๊มดูดจ่ายของเหลว- Pumps
	3384-3389 Variable-Speed Pump	Compact, variable-flow, bi-directional, self-priming peristaltic pumps offer precise flow deliveries. Dial in the flow rates.
	3388 Variable-Flow Chemical Transfer Pump	Pumps fluids with a viscosity to 200 centipoises. Suction lift is 10 feet wet, 4 inches dry. Reverses for ease in draining.
เครื่องวัดความดังของเสียง – Sound Meter
	4335 Sound Level Meter	Memory stores the highest reading achieved. Adjustable response time. Three-decibel ranges.
	4336 Traceable® Analog Sound Meter	Measures in 7 ranges. Low battery checker.
นาฬิกาจับเวลา – Stopwatches
	1025 Traceable® 60 Memory Stopwatch	60-memory, stopwatch with countdown. 3-line display.
	1030 Traceable® Digital Stopwatch	Single-action, time-out, interval-split, and continuous timing. Times to 9 hrs, 59 min, 59 sec, and 99 hundredths.
	1031 Traceable® Decimal Stopwatch	Single-action, time-out, interval-split, and continuous timing. Times to 19 hours, 59 minutes, 59 seconds, and 99 hundredths.
	1034 Traceable® 2-Display Digital Stopwatch	Single-action, time-out, interval-split, and continuous timing. Times to 9 hrs, 59 min, 59 sec, and 99 hundredths.
	1035 Traceable® Countdown Stopwatch	Set by turning a dial. Countdown and alarm timing in increments of 1 min, 5 min, 10 min, up to 45 min.
	1037/1044 Traceable® Stopwatch/Chronograph	Times to 24 hours. Chronograph. Single-action, time-out, cumulative split, and continuous timing.
	1042 Traceable® Waterp./Shockp. Stopwatch	Times to 24 hours. Single-action, time-out, cumulative split, and continuous timing. Waterproof to 3 atms.
	1043 Traceable® Three-Button Stopwatch	Start/stop, time-out, cumulative split, and continuous rollover timing. Time and date.
	1045 Traceable® Water-/Shock-Resist Stopwatch	Times to 24 hours. Single-action, time-out, cumulative split, continuous timing. Water-/shock resistant.
	1047 Traceable® Big-Digit Stop./Chrono.	LCD digits 0.4 inches. Single-action, time-out, and cumulative split. Times up to 24 hours.
	1048 Traceable® Stopwatch/Repeat Timer	Countdown time from 10 hours to 1/10 of a second. Repeat cycle automatically continues until stopped.
	1051 Traceable® Jumbo-Digit Stopwatch	1/2-inch high digits. Resolution 1/100 of a second. Chronograph. Water-resistant.
	1052 Traceable® 300 Memory All-Function Stop.	300 Memory All-Function Stopwatch, countdown timer, and handy clip. Stopwatch times to 9 hours, 59 minutes, 59 seconds, 99 hundredths.
	1221 Traceable® Digital Bench top Timer	Digital display is 3/4 inch high. Times up from 0.01 sec. to 9 hrs, 59 min, 59 sec, and 99 hundredths of a sec.
	8529 Mechanical Stopwatch	Analog 1/10 second stopwatch with metal case.
เครื่องวัดค่าความเร็วรอบ – Tachometers
	4059 Traceable® Touchless/Contact Dig. Tacho.	3-seconds response time. Recalls the highest, lowest, and last reading.
	4060 Traceable® Digital Laser Tachometer	1-second response time. Recalls the last reading at any time.
	4261 Traceable® Tachometer Touch	Contact measurements for rotating surfaces
	4262 Traceable® Tachometer w/Red LED Pointer	Red LED light, touchless handheld point-and-shoot tachometer
เครื่องัดค่าอุณหภูมิแบบดิจิตอล – Thermometers
	4000 Traceable® Digital Thermometer	The most accurate thermometer. Min/max memory. Data Logger. Resolution of 0.001°.
	4003 Traceable® Waterproof Type K Thermometer	One of the most technically advanced, fastest-reading, yet easy-to-use thermometers ever designed.
	4004 Traceable® Big-Digit Type K Thermometer	Easy to read big digits measure over 5/8-inch-high digits are readable from 15 feet away.
	4007 Traceable® Memory Wide-Range Thermometer	Expansive range of -200 to 1370°C and a backlight for dark areas.
	4008 Type-K Surface Probe	Stainless-steel with handle, triple purpose
	4014 Stainless-Steel Type-K Probe	Triple purpose: liquids, air/gas, and semisolids.
	4015 Traceable® Total Range Thermometer	Complete range from -200 to 1370°C. Updated twice a second.
	4021 Micro Probe	Micro probe for Cat. No. 4000
	4022 Surface Probe	Surface probe for Cat. No. 4000.
	4023 Air Probe	Air probe for Cat. No. 4000.
	4025,4026 Traceable® Expanded-Range Therm.	Easy to use 3-position switch and 2 probes so you can monitor multiple tests.
	4028 Type-K Beaded Probe	Fast response, type-K thermocouple. 4 feet long.
	4029 Traceable® Dual Channel Thermometer	Simultaneously shows 2 separate temperatures from 2 probes or difference between them.
	4039, 4339 Traceable® Waterproof Thermometer	Waterproof and shockproof
	4040 Traceable®Therm./Clock/Humidity Monitor	Displays time of day, temperature, and humidity. A.M./P.M. or 24-hour military time.
	4042-4344 Traceable® Digital Dial Thermometer	Always on thermometer. Large temperature range.
	4045 Traceable® Digital Thermometer	Probe holder. Settable high/low temperature alarms.
	4100-4101 Traceable® Printing Thermometer °F/°C	Printing Thermometer provides permanent record, prints time and date
เครื่องตั้งเวลาปลุกเตือน เครื่องจับเวลา นาฬิกาจับเวลา – Timers
	1004 Compact Timer	Mechanical timer from 1 to 120 minutes. Loud, 5-second ring.
	1021 Traceable® Bench Timer	Twelve timing channels. Four timing modes. Audible alarm.
	1060 Traceable® Pocket Timer	Clip it. 60-second buzzer. Three-button operation.
	1062 60-Minute Interval Timer	Mechanical timer from 0 to 60 minutes.
	1092-1093 SX-Timer™ – Quick-Timer™	Wind up, analog timers forever eliminate battery replacements.
	1221 Traceable® Digital Bench top Timer	Digital display is 3/4 inch high. Times up from 0.01 sec. to 9 hrs, 59 min, 59 sec, and 99 hundredths of a sec.
	3260 Traceable® Time and Number Printer	Time-stamp and number all your paperwork with electronic precision.
	5000 Traceable® Three-Channel Alarm Timer	Displays 3 different times simultaneously. Loud decibel for noisy areas and low for quiet areas.
	5002 Traceable® Original Lab Timer	Program 3 activities from 9 hours, 59 minutes, 59 seconds to 1 second. Distinct alarm.
	5004 Traceable® Four-Channel, Big-Digit Timer	Can be seen from across the room. High-decibel alarm. Set up to 4 channels.
	5005 Eight-Channel Alarm Timer	All-purpose, Eight-Channel Alarm Timer with volume control. 100-hour timing capacity.
	5006 Traceable® Two-Memory Timer	Counts up/down from 23 hours, 59 minutes, 59 seconds. AM/PM or 24-hour format.
	5007 Traceable® Lab-Top Timer	Large keys and any-angle viewing. Counts down from 24 hrs to 1 sec. Memory is locked until changed.
	5008 Traceable® Three-Line Alarm Timer	Times simultaneously. Channels may be started individually or concurrently.
	5009 Traceable® Big-Foot Timer	One inch high LCD digits. Simultaneous programming of 3 different activities from 99 hrs, 59 min, 59 sec to 1 sec.
	5011 Traceable® GIANT-DIGIT™ Countdown Timer	View giant size digits on your bench timer from across the lab.
	5012 Traceable® Multi-colored™ Timer	Add color to your lab, 4-Channel Multi-Colored™ Timer, personalize your timer, show your distinct style with customized bold colors—a fresh look for the lab
	5014 Extra-Extra-Loud Traceable® Timer	One-hundred-decibel alarm. Memories returns to previous countdown time at the touch of a button.
	5015 Traceable® Talking Timer	Voice periodically reminds you of countdown time remaining to zero. Eliminates looking at the timer.
	5020 Traceable® Alarm Timer/Stopwatch	Counts down from 100 min. Stopwatch counts up to 60 min and rolls over to zero and continues timing.
	5021 Traceable® 100-Hour Alarm Timer/Stop	Counts up/down with alarm. Numbered keys 0-9. Counts down from the memory.
	5022, 5023 Traceable® Jumbo Timer	Simultaneous programming of 2 different activities from 24 hours to 1 second. One-inch high LCD digits.
	5025 Traceable® Triple-Display Timer	Alarm sounds for 1 min. Memory returns to the previously programmed time.
	5026 Traceable® QC Timer	Count down and alarm timer combines easy, 3-button operation with giant-size digits.
	5027 Traceable® Triple-Purpose Timer	3/4-inch-high digits. Countdown/up, AM/PM or 24-hour format. Full keyboard 0-9 keys.
	5028 Traceable® 99M/59S Timer	Counts down from 99 minutes in second increments with 3-button ease and big-digit visibility.
	5030 Traceable® Memory Timer	Countdown from 24 hrs in increments of 1 min. Seconds are displayed the last 10 minutes.
	5035 Traceable® Advanced Memory Timer	Remembers the last time set, counts down/up, alarms from 24 hrs in increments of 1 sec.
	5036 Traceable® Water-Resistant Timer	Audible alarm sounds for 1 minute or can be manually turned off.
	5037 Traceable® Credit Card Timer	Counts down from 99 minutes, 59 seconds with a 1 second resolution.
	5040 Traceable® 100-Hour Timer	Counts both up and down to 100 hours. Alarm turns off manually or is silenced after 1 minute.
	5041 Traceable® Key-Chain Timer	4-digit LCD display. Countdown in min from 20 hrs. Alarm sounds for 60 sec, or may be silenced manually.
	5042 Traceable® Fingertip™ Timer	Three button operation. Repeat memory. Counts down from 99 minutes, 50 seconds in 1-second increments.
	5043 Traceable® Tie Timer	36-inch lanyard. Digits are 0.45” high. Counts down and alarms from 24 hours to 1 second. Memory.
	5045 Traceable® Digital Timer Plus	Six-digit LCD always shows the time remaining in hours, minutes, and seconds
	5046 Traceable® Clip-It Timer	Three-button operation. Clip-It Timer counts down, alarms, and functions as a stopwatch.
	5047 Traceable® Touch Timer	Four-digit display. Count down and alarm from 19 hours, 59 minutes to 1 minute. Two-button operation. Loud-beeping alarm.
	5048 Traceable® Multiple Alarm Timer	96 alarms daily. A bar graph shows the time line and arrows show every alarm time set. Time of day.
	5122 Traceable® Instant-Recall Memory Timer	Ideal timer to dedicate to routinely timed test
	5127 Traceable® Double Display Timer	Simultaneously program two different activities
	5132 Traceable® Nano™ Timer	Ultra small design, two channel easy operation, time of day, and 2-1/2 x 2-inch size.
	8906 Traceable® LCD Timer	Compact timer is a timer, stopwatch and clock
เครื่องมือ อุปกรณ์ที่จำเป็นสำหรับห้องปฏิบัติการ – Tools
	3419 Ultrasonic Automatic Measuring Meter	Simply point and shoot to measure distance, area, and volume. LCD displays measurement.
	3475 Traceable® SpatulaBalance™	Unique spatula both scoops material and instantly displays weight.
ผ้าเช็คเลนส์ เครื่องมือวิทยาศาสตร์ เครื่องแก้วแบบไม่มีขุย – Wipes
	2050 Certified Cheesecloth Wipes	Reagent-grade quality. Excellent filtering material. Lint-free.
	2060-2065 Clean-Wipes	Individually dispensed wipes are handy and ready for instant use. Lint-free. New universal clean-up tool.
	2067 Optik-Wipes	Works for non-reflective and UV-resistant coated glasses. Prevents fogging. Nonwoven cloth is premoistened.
เครื่องวัดสภาพอากาศ – Weather Station
	4250 Wireless Weather Station	Temp, RH, dew point, barometric pressure/pressure trend, weather forecast, wind direction/speed, wind chill and more.

	เครื่องวัดค่าความดันบรรยากาศ อุณหภูมิ และความชื้นแบบดิจิตอล

	เครื่องวัดค่าความสว่างของแสง (Digital Light Meter)

	เครื่องวัดระดับความดังของเสียง (Digital Sound Level Meter)

	เครื่องวัดอุณหภูมิแบบดิจิตอล (Digital Thermometer with Built-in Printer)

	เครื่องวัดอุณหภูมิแบบดิจิตอลโดยใช้แสงอินฟาเรด (Infrared Digital Thermometer)

	นาฬิกาจับเวลาพร้อมใบรับรองการสอบเทียบ (Timer)

	เครื่องวัดค่าความเร็วรอบแบบสัมผัส (Contact Tachometer)

	เครื่องวัดค่าความเร็วรอบแบบสัมผัสและแบบใช้แสง (Contact / Non-Contact Tachometer)

	เครื่องวัดค่าความชื้นสัมพัทธ์และอุณหภูมิแบบดิจิตอล (Digital Humidity / Temperature Meter)

	เครื่องวัดค่าความชื้นแบบอัตโนมัติ (Digital Moisture Meter)

	เครื่องวัดระยะแบบละเอียด (Digital Vernier)

	เครื่องวัดค่าอุณหภูมิห้อง ความชื้น แสงสว่าง และอุณหภูมิตัวอย่างแบบอัตโนมัติ (Digital EnviroMeter)

	ปั๊มสำหรับดูดจ่ายสารเคมี (Chemical Dosing Pump)

CRS ChemRe

asithailand Can Testing / Material Testing for Plastic, Film, Glass, Bottle, Rubber, Distillation / Extraction / SFE for Herbal Natural Products, Metal and Paints Testing Instruments, Packaging Testing Instruments for Food and Beverage, Petroleum & Petrochemical Testing Instruments, Pharmaceuticals / Cosmetics Testing, Plastic, Rubber, Polymers, Electric Wire, Leather, Film, Textile Testing, Pulp, Paper & Packaging Testing Instruments January 26, 2017June 18, 2020

ผู้ผลิตเครื่องมือทดสอบถังปฏิกรณ์ความดันสูงสำหรับงานวิจัยและพัฒนาผลิตภัณฑ์ทางด้านวิทยาศาสตร์ วิศวะเคมี ปิโตรเลียม ปิโตรเคมี พลาสติค โพลีเมอร์ อุตสาหกรรมยาและเครื่องสำอาง อุตสาหกรรมอาหาร เช่น ถังสกัดสารความดันสูง (High Pressure Reactor) ปั๊มของเหลวแรงดันสูง อุปกรณ์วาล์วและท่อความดันสูง (High Pressure Valve & Tubing) เครื่องสกัดสารแบบท่อ (Tubular Reactor System) เครื่องสกัดสารสำคัญด้วยคาร์บอนไดออกไซด์แบบยิ่งยวด (Supercritical Fluid Extraction : SFE-CO2 ), เครื่องสกัดสารด้วยน้ำแบบยิ่งยวด (Supercritical Fluid Extraction : SFE-H2O) การทำลาย-ฆ่าเชื้อผลิตภัณฑ์อาหารด้วยความดันสูง (CIP&FIP) การทำผงผลิตภัณฑ์ยาและเครื่องสำอาง (SFE-SAS) การทำครีมผลิตภัณฑ์ยาและเครื่องสำอาง (SFE-RESS) เครื่องสกัดสารอนินทรีย์จากพลาสติคด้วยความดันสูง (High Pressure Reactor) เครื่องศึกษาประสิทธิภาพของตัวเร่งปฏิกิริยา (Catalyst Reactor) เป็นต้น

– Tubular Oven Type Catatest Reactor
– High Pressure Stirring Reactor (Glass / Metal)
– pH Controlled Reactor System with Stirring
– Supercritical Water Oxidation System (SCWO)
– Supercritical Fluid Dryer (SFD)
– Oven Type Supercritical Fluid Extraction (SFE)
– Cold Isostatic Pressure Reactor System (CIP)
– Food Isostatic Pressure Reactor System (FIP)

ตัวอย่างการใช้งาน (Applications)
Polymerization, Hydrogenation, Dehydrogenation, Oxidation, Amination, Distillation, Organic Synthesis, Catalytic Reaction, Isomerization, Poly-Silicon CVD, Poly-Silicon FBR, Bio- Polymerization, Gasification, Fuel Cell, Supercritical Extraction, Subcritical Extraction, Catalytic Combustor, GTL Process, CTL process, Coal Slag Tester, CO2 Dry & Cleaning, DME Process, etc.

R-201 Series Reactor System

General Specifications

– The vessel of R-201 Series Reactor is metal.
– General Max. Pressure : 414 Bar (6000 psig)
– General Max. Temperature : 500℃
– General Capacity: 100ml~500L
– R-201 & 211 Series Reactors are designed to select between the metal vessel & glass vessel.
And these are designed to move vessel by pressure cylinder easily.

Order Guide

Series	Volum	ID	Conn.Size	Stand	Heater	Max. Pressue	Magnetic Drive	Motor
201-1	100mL	50mm	1/8″NPT	Bench	0.5Kw	6000psig	16in-lbs	60W
201-2	300mL	55mm	1/8″NPT	Bench	1.0Kw	6000psig	16in-lbs	1/12Hp
201-3	500mL	65mm	1/8″NPT	Bench	1.0Kw	6000psig	16in-lbs	1/8Hp
201-4	1L	94mm	1/8″NPT	Bench	1.5Kw	6000psig	16in-lbs	1/4Hp
201-5	2L	107mm	1/8″NPT	Bench	2.5Kw	6000psig	16in-lbs	1/4Hp
201-6	5L	145mm	3/8″NPT	Floor	3.5Kw	6000psig	32in-lbs	1/3Hp
201-7	10L	210mm	3/8″NPT	Floor	8.0Kw	6000psig	64in-lbs	3/4Hp
201-8	Other

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-211 Series Glass Reactor System

General Specifications

– The vessel of R-211 Series Glass Reactor is glass.
– General Max. Pressure : 14 Bar (220 psig)
– General Max. Temperature : -30~250℃
– Capacity: 100ml~100L
– R-201 & 211 Series Reactors are designed to select between the metal vessel & glass vessel.
And these are designed to move vessel by pressure cylinder easily.

Order Guide

Series	Volum	ID	Conn.Size	Staand	Heater	Max. Pressue	Msg.Drive	Motor
211-1	300mL	55mm	1/8″NPT	Bench	1.0Kw	220psig	16in-lbs	1/12Hp
211-2	500mL	65mm	1/8″NPT	Bench	1.0Kw	220psig	16in-lbs	1/8Hp
211-3	1L	86mm	1/4″NPT	Bench	1.5Kw	220psig	16in-lbs	1/4Hp
211-4	2L	107mm	1/4″NPT	Bench	2.5Kw	150psig	16in-lbs	1/4Hp
211-5	5L	140mm	3/8″NPT	Floor	3.5Kw	100psig	32in-lbs	1/2Hp
211-6	8L	160mm	3/8″NPT	Floor	7.5Kw	100psig	64in-lbs	1/2Hp
211-7	10L	210mm	3/8″NPT	Floor	8.0Kw	50psig	64in-lbs	3/4Hp
211-8	Other

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-202 Series Oven type Reactor System

Features

Easy to make temperature uniform without effect on
Easy to open & close the cover from the vessel because of pin
Easy to move the vessel by lifting in the oven

General Specification

Pressure Vessel
  · Material ( 316SS, Hastelloy C- 276, Ti, inconel, etc.)
  · Capacity : 100ml~2L
  · Design Max. temperature: 300’C
  · Design Max. Pressure: 5000psig

V.F.T.
· Valve , fitting, tubing

Cover
· Gas Inlet nozzle & Valve
  · Gas Outlet nozzle & Valve
  · Sample nozzle & Valve
  · Cooling coil inlet & Outlet
  · Thermowell
  · Pressure equipmet nozzle
  · Pressure equipmet nozzle

Structure
· Oven Type skid
· Lifing cylinder

Heater
· Electric Band Heater
· Ceramic

Magnetic Drive
  · 16, 32 In- Ibs
  · Outter & Inner Magnetic
  · DC Motor ( 60W, 90W, 1/8HP , 1/4HP, Etc.)
  · RPM ( 0~3000 rpm)

Control Box System
· Digital manual & software control box
· Touch screen ( option)

Order Guide

Capacity	Material	Pressure(bar)	Temp.(℃)	Viscocity(CP)
100ml~500ml ①	316SS ①	1~10 ①	0~100 ①	Below 10,000 ①
500ml~1L ②	hastelloy ②	10~100 ②	100~200 ②	10,000~50,000 ②
1L~2L ③	Titanium ③	100~200 ③	200~300 ③	above 50,000 ③

* Please select above numbers. ex) C①M②P①T①V①

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-301 Series Catatest Reactor System

Use of catatest

– Determinations of different variables for researching on Catalyst improvement, such as; Reacting Temperature, Pressure and Feed Flow, reaction temperature, Pressure, Feed flow, reaction kinetics, etc
– Test of Catalyst on Hydrogen reaction
– Catalyst Screen, Selectivity & Activity Test
– Test of Catalyst Life Span

General Specification

– Catalyst volume (5mL~2L) : 316SS & Hastelloy C276
– Reactor Design Pressure : 1,000psig~6,000psig
– Reactor Design Temperature : 800℃
– Operating Temperature : 650℃
– Operating Pressure : 1200psig
– Liquide Flow rang : 20mL/min~100L/min
– Gas flow range:
⇒ H2 gas : 50mL/min~3L/min
⇒ O2 gas : 50mL/min~3L/min
⇒ N2 gas : 50mL/min~500mL/min
⇒ Feed&Spare gas : 50mL/min~500mL/min

Order Guide

301	A	B	C	D	E	F
Series	Net Volume	Pressure	Temp.	Power	Control System	MFC
301	1. 8ml	1. 300psig	1. 300℃	1. 220/60/1	1. Local Controllers	1. MFC(1)
	2. 12ml	2. 500psig	2. 400℃	2. 220/60/3	2. Local Controllers & R-SCS SW(PC)	2. MFC(2)
	3. 20ml	3. 1000psig	3. 500℃	3. 220/50/1	3. DAQ System (Only PC version)	3. MFC(3)
	4. 20ml	4. 2000psig	4. 600℃	4. Other	4. Other	4. MFC(4)
	5. 20ml	5. 3000psig	5. 800℃			5. MFC(5)
	6. 20ml	6. 5000psig	6. 1000℃			6. Other
	7. Other	7. Other	7. Other

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-302 Series Compact Catatest Reactor System

Features

Compact design of the complete system for easy installation and also easy transport by wheel.

Oventype Skid

Oven system surround reaction zone can keep the even test without any effect from any change of circumstance. Also, it can of reactor can keep even temperature of oven circumstance.

General Specification

REACTOR : 5 ~ 500mL
  · MAX TEMP. : 800℃
  · MAX PRESS. : 6000PSIG
  · INCONEL, HASTELLOY, ETC

HEATER : CERAMIC FIBER HEATER
· ZONE : 2 ~ 5 ZONE.
· MAX TEMP. : 1000℃

MFC : BRONKHORST,BROOKS, LINE-TECH,ETC.
· ACCURACY : ± 1%
· SIGNAL : 0~5VDC OR 4~20mA

BPR: TESCOM, SWAGELOK, ETC.
· PRESS. RANGE : 0~10,000PSIG
* OPTIONAL : ER-3000 SERIES

SEPERATOR : 316SS, ETC
  · TEMP. : 0 ~ 200℃
  · PRESS. : 0 ~ 3000PSIG
* OPTIONAL : LEVEL
  · SWITCH & PNEUMATIC
  · VALVE (AUTO SYSTEM)

CONDENSER : 316SS, ETC
  · TYPE : JACKET, SHELL & TUBE TYPE, ETC.
  · TEMP. : 0 ~ 250℃
  · PRESS. : 0 ~ 6000PSIG

Order Guide

302	A	B	C	D	E	F	G
Series	Net Volume	Pressure	Temp.	Material	Power	Control System	Gas/Liquid
302	1. 8ml	1. 300psig	1. 300℃	1. 304SS	1. 220/60/1	1. Local Controllers	1. MFC-Gas – 1. Gas – 2. Flow
	2. 12ml	2. 500psig	2. 400℃	2. 316SS	2. 220/60/3	2. Local Controllers & R-SCS SW(PC)	1. MFC-Gas – 1. Gas – 2. Flow
	3. 20ml	3. 1000psig	3. 500℃	3. Hac-C	3. 220/50/1	3. DAQ System (Only PC version)	2. MFC-Liq. – 1. Liquid – 2. Flow
	4. 100ml	4. 2000psig	4. 600℃	4. Inconel	4. Other	4. Other	2. MFC-Liq. – 1. Liquid – 2. Flow
	5. 300ml	5. 3000psig	5. 800℃	5. Other			3. Pump-Liq.
	6. 500ml	6. 5000psig	6. 1000℃				4. Other
	7. Other	7. Other	7. Other

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-401 Series Supercritical Fluid Extraction System & SCWO

Features

– SFE&SCWO can be selected according to its purpose lf use
– Supercritical Fluid Extractions and Reaction’ Capacity, Pressure. Temperature, etc, are all optional selections available
– As for Capacity, it is standard from 20mL up to 2L, and when it should be an optional selections available.
– Designing is available from 20mL up to 500mL for 10,000psig, 5,000psig when 1Liter and 2Liters.

General Specification

– Capacity : 50mL~10L
– Design Pressure : 10,000psig
– Design Temperature : 0~500℃
– Materials : 316SS, Hastelloy C-276
– Heater Capacity : 0.5~5Kw
– Support Stand : Floor Stand
– “K”Type Thermocouple & Thermowell
– Pressure Gauge & Pressure Transmiter (0~10,000psig)

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-401 Series Supercritical Fluid Extraction System & SCWO

Features

General Specification

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-402 Compact Supercritical Fluid Extractor System

Features

– Without the effect on surrounding temperature users can make the temperature uniform.
– Users can gain the extract from the extractor more easily than system.
– Users can open & close the cover from the vessel because of pin type.
– Users can move the extractor by lifing in the oven easily.

General Specification

Extractor
  · Material : 316SS, hastelloy C-276, Ti ,inconel, etc.
  · Capacity : 50ml~ 1.5L
  · Design Max. temperature : 250℃
  · Design Max. pressure : 10,000 psig

Condenser
· coil type
· insert into the chiller

Seperator
· Capacity : 50ml~ 10Liter
· Material : 316SS

Cover
  · gas inlet nozzle & valve
  · gas outlet nozzle & valve
  · thermowell
  · pressure equipments nozzel
  · etc.

Receiver tank
· Capacity : 50ml~ 10Liter
· Material : 316SS

Pump
  · Design Pressure : 1~10,000 psig
  · Material : 316SS
  · Connection : 1/4″~1/8″

Heater
· electric band heater

Chiller
· Bath capacity : 6~30 Liter
· Temperature range : -20~100℃

Order Guide

302	A	B	C	D	E	G
Series	Capacity	Pressure	Temp.	Material	Power	Control System
402	1. 50ml	1. 300psig	1. 100℃	1. 304SS	1. 220/60/1	1. Local Controllers
	2. 100ml	2. 500psig	2. 200℃	2. 316SS	2. 220/60/3	2. Local Controllers & R-SCS SW(PC)
	3. 500ml	3. 1000psig	3. 250℃	3. HC-276	3. 220/50/1	3. DAQ System (Only PC version)
	4. 1000ml	4. 2000psig		4. Inconel	4. Other	4. Other
	5. 1500ml	5. 3000psig		5. Other
	6. Other	6. 5000psig
		7. 10,000psig

Please contact to us for other temperature, pressure and capacity besides above standard specification.

R-501 Series the Automation System

Features

– Temperature monitoring & PID control
– Pressure monitoring
– Pressure Control(option)
– Agitating Speed Monitoring & PID Control
– pH Monitoring
– ISE Monitoring(Options)
– pH Control(Options)
– Conductivity Monitoring(Options)
– DO Monitoring(Options)
– COD Monitoring(Options)
– ORP Monitoring(Options)
– Safety : Overtemp & Overpressure monitoring & Shutoff function
– Programmable Temperature Control(Options)
– R-SCS S/W
– Wave Form Chart : Auto Scale Date (Time vs. Scope, Sweep Chart), Format & precision Control Mapping mode (Linear or log axis), Zoom in Rectangular
– Elapsed Time (HH:MM:SS) : Shows Entire Elapsed time.
– Reaction Time (HH:MM:SS) : Shwos Date Saving.
– Support Korean version of File Name.
– Saving Data with ASCII Format

Please contact to us for other temperature, pressure and capacity besides above standard specification.

Software Program

All systems can be remotely controlled by the Software Program.

DC Scientific

asithailand Petroleum & Petrochemical Testing Instruments January 26, 2017June 18, 2020

ผู้ผลิตเครื่องแก้วทดสอบน้ำมันปิโตรเลียมตามมาตรฐาน ASTM และเซ็นเซอร์วัดค่าอุณหภูมิแบบ Pt-100 สำหรับเครื่องมือทดสอบทางด้านปิโตรเลียมแบบอัตโนมัติ้น

ASTM Petroleum Glasswares & Pt-100 Temperature Probes

ASTM D86 Distillation of Petroleum Products at Atmospheric Pressure

D86 Glassware and Accessories / Downloadable PDF File

D56 Flash Point by Tag Closed Cup Tester

D87 Melting Point of Petroleum Wax

D92 Flash and Fire Points by Cleveland Open Cup

D93 Flash Point by Pensky-Martens Closed Cup Tester

D97 Pour Point of Petroleum Products

D130 Copper Strip Test for Petroleum Products

D287 API Gravity of Petroleum Products Hydrometer Method

D381 Gum Content in Fuels by Jet Evaporation

D446 Viscosity Tubes

BS/IP/RF U-Tube Reverse Flow

DC Scientific Viscometer Tubes and Accessories Downloadable PDF
DC Scientific Viscometer Tube Repair and Recalibration Downloadable PDF

D473 Sediment in Crude and Fuel Oils by Extraction Method

D524 Ramsbottom Carbon Residue of Petroleum Products

D611 Aniline Point of Petroleum Products and Hydrocarbon Solvents

D525 Oxidation Stability of Gasoline

D665 Rust Preventing Characteristics of Inhibited Mineral Oil

D721 Oil Content of Petroleum Waxes

D892 Foaming Characteristics of Lubricating Oils

D942 Oxidation Stability of Lubrication Greases

D943 Oxidation Characteristics of Inhibited Mineral Oils

D1160 Distillation of Petroleum Products at Reduced Pressure

D1160 Glassware and Accessories Downloadable PDF
D1160 Vacuum Distillation Instrument Downloadable PDF

D1217 Density of Liquids by Bingham Pycnometer

D1266 Sulfur in Petroleum Products

D1319 FIA System

DCS FIA Columns, Systems and Accessories Downloadable PDF

D1401 Water Separability of Petroleum Oils and Synthetic Fluids

D2001 Depentanization of Gasoline and Napthas

D2007 Characteristic Groups in Rubber Extender and Processing Oils

D2386 Freezing Point of Aviation Fuels

D2500 Cloud Point of Petroleum Products

D2983 Low Temperature Viscosity by Brookfield Viscometer

D3242 Acidity in Aviation Turbine Fuel

D3427 Air Release Properties of Petroleum Oils

D4530 Determination of Carbon Residue (Micro Method)

D4636 Corrosiveness and Oxidation Stability

D6371 Cold Filter Plugging Point

D7279 Houillon Viscometer