S::CAN – ผู้เชี่ยวชาญทางด้านเครื่องมือควบคุมคุณภาพน้ำดื่ม
น้ำเสีย คุณภาพน้ำก่อนและหลังการบำบัดระดับอุตสาหกรรม
เครื่องโดยใช้เทคโนโลยีขั้นสูงที่พร้อมแก้ปัญหาให้กับผู้ใช้งานได้หลากหลาย
เครื่องมือที่ได้รับความนิยม เช่น
เครื่องวัดค่าปริมาณคลอรีนอิสระในน้ำดื่มโดยไม่ต้องใช้สารเคมี
ไม่ต้องบำบัดตัวอย่างหลังการใช้งาน การวัดค่า TSS, Turbidity,
NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC chlorine, chlorine dioxide,
hydrogen peroxide, peracetic acid, conductivity, redox, fluoride, dissolved
oxygen and solids in water สามารถรายงานค่าแบบต่อเนื่องหรือOnline เหมาะกับการควบคุมการทำงานในไลน์การผลิตแบบหลาย Test Parameter เป็นต้น
Intelligent. Optical.
Online.
.
Our
products measure a wide range of parameters in numerous applications. From our
very solid-state pH probe to our highly innovative spectral probes, all our products are developed
with the same philosophy in mind: s::can measuring instruments are intelligent,
robust,and require little or no maintenance. They can be seamlessly integrated
with other s::can systems but are also compatible with third-party systems.
Intelligent: All s::can sensors are
intelligent, they are digital and have the controller, the brain, built in.
They check their health every second and can communicate with the operator.
Optical: If possible, we always use optical
methods, since they are just better, more reliable, simpler,and more accurate.
If no optical method is suitable, we choose the next best alternative.
Online: We make nothing for laboratories,
nothing that consumes reagents, nothing with moving parts. s::can is the only
real „on-line“ company in the industry that offer an almost complete range of
sensors and parameters, and nothing else.
Spectrometer Probes
All
s::can spectrometer probes operate using the same measuring principle:
Spectrometry. The spectrometer probes are at this point the first and only
instruments in the world that can measure optical spectra from 190 to 750 nm
directly in liquid media. The substances contained in the medium weaken a light
beam emitted by a lamp that moves through the liquid. After contact with the
medium its intensity is measured by a detector over a range of wavelengths
specific to the application.
More about our spectrometer probes
Spectrometer
Probes
All
s::can spectrometer probes operate using the same measuring principle:
Spectrometry. The spectrometer probes are the first and only instruments in the
world that can measure optical spectra from 190 to 750 nm directly in liquid
media. The substances contained in the medium weaken a light beam emitted by a
lamp that moves through the liquid. After contact with the medium its intensity
is measured by a detector over a range of wavelengths specific to the
application.
Spektrometersonden
|
|
|
spectro::lyser V3
High performance online water
quality monitoring! s::can proudly announces the launch of the next
generation of spectrometers for online water quality monitoring. As the
technology leader we have performed extensive research on our customers’
needs and developed the spectro::lyser V3 based on these results.
spectro::lyser™ UV-Vis monitors depending… |
spectro::lyser titanium pro
spectro::lyser™ titanium pro
monitors depending on the application an individual selection of: TSS,
turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX,
AOC, fingerprints and spectral alarms, temperature and pressure s::can plug
& measure measuring principle: UV-Vis spectrometry over the total range
(190-720 nm)… |
spectro::lyser industrial ATEX
spectro::lyser™ industrial
monitors depending on the application an individual selection of: TSS,
turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC,
fingerprints and spectral alarms, temperature and pressure s::can plug &
measure measuring principle: UV-Vis spectrometry over the total range
(190-720 nm)… |
|
|
|
|
spectro::lyser™ UV monitors depending on the application an
individual selection of: NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, BTX, AOC,
fingerprints and spectral alarms, temperature and pressure. s::can
plug & measure measuring principle: UV-Vis spectrometry over the total
range (190-390 nm) multiparameter probe with adjustable open… |
i::scan – the new miniature multi-parameter
spectrophotometer probe will revolutionize online water quality monitoring:
From very cost sensitive applications down to highly resolved “Smart Water
Grids”, in small unmanned plants, or even in single building protection. The
new i::scan combines the high performance of a multi wavelength
spectrophotometer with even… |
The
carbo::lyser is ideal for the measurement of the organic carbon load,
represented by parameters like UV254, TOC, DOC, COD, or BOD, and at the same
time, turbidity / solids concentration. Applicability ranges from pure water
to industrial waste water. Pre-calibrations for different types of water and
applications significantly facilitate… |
|
|
|
|
Measurement of ozone in water is what the ozo::lyser is
optimized for. This member of the spectrometer family is optimized to
determine concentrations of ozone dissolved in water online and InSitu. It
offers an attractive alternative to classical electrochemical ozone sensors,
thanks to its very low maintenance requirement and extreme… |
Applications range from (ultra) pure water in the μg/l
range up to industrial waste water in the g/l range. The nitrate
concentration displayed is not sensitive to cross-influences from other
substance groups such as organic carbon or total solids. The measured
parameters are always nitrate and turbidity / solids concentration. |
The multi::lyser is a combination of s::can carbo::lyser
and nitro::lyser. That means that the s::can multi::lyser is characterised by
measuring organic carbon & nitrate for a multitude of pre-defined
applications. The multi::lyser is ideal for surface water, ground water,
drinking water, wastewater and offers an optimum of cost effectiveness and… |
|
|
The uv::lyser monitors turbidity or TSS and up to 4 freely
chosen wavelengts between 190 and 720 nm. Furthermore, depending on the
application, it also measures turbidity or solids. The uv::lyser provides
cost effective but accurate and precise instrument for applications in
surface water, ground water, drinking water and wastewater. |
Other Sensors
The ammo::lyser™ is an ion-selective
multiparameter probe that can continuously determine the parameters ammonium,
potassium, nitrate, pH and temperature directly in the water – without the need
for complicated and maintenance-intensive sample pretreatment. In addition,
s::can also offers sensors for measuring chlorine, chlorine dioxide, hydrogen
peroxide, peracetic acid, conductivity, redox, fluoride, dissolved oxygen and
solids in water.
More about our sensors
|
|
|
ammo::lyser pro
A
multi-parameter probe for the online measurement of ammonium. It is an
absolutely reliable device outclassing conventional analysers in terms of
measurement stability and lifetime. Precision is guaranteed by real time
compensation of the ammonium value with temperature, pH and potassium and a
high performance reference electrode. ammo::lyser™… |
A multi-parameter probe for the online measurement of
ammonium. It is an absolutely reliable device outclassing conventional
analyzers in terms of measurement stability and lifetime. Precision is
guaranteed by real time compensation of the ammonium value with temperature,
pH and potassium and a high performance reference electrode. ammo::lyser… |
The chlori::lyser is a revolutionary pH- and
flow-independent sensor for monitoring free chlorine or total chlorine. Its
internal buffer electrolyte allows pH-independent measurement between pH 4 to
10+, and its 3-electrode system provides extremely stable readings. High
precision is ensured even at high fluctuations of pH, temperature and flow.
… |
|
|
|
|
The
chlodi::lyser is an amperometric sensor for monitoring chlorine dioxide. It
is ideal for all kinds of water treatment and produces stable readings even
at high fluctuations of pH, temperature and flow. Strong surfactants are
tolerated and the chlodi::lyser is not cross sensitive to chlorine.
chlodi::lyser measures chlorine dioxide s::can… |
The hyper::lyser is an amperometric sensor for monitoring
hydrogen peroxide. It is ideal for all kinds of water treatment and produces
stable readings even at high fluctuations of pH, temperature and flow. Strong
surfactants are tolerated. s::can plug & measure measuring
principle: amperometric (membrane covered) ideal for all kinds… |
The peroxy::lyser is an amperometric sensor for monitoring
peracetic acid. It is ideal for all kinds of water treatment and produces
stable readings even at high fluctuations of pH, temperature and flow. Strong
surfactants are tolerated and the peroxy::lyser is not cross sensitive to
high concentrations of hydrogen peroxide. … |
|
|
|
|
The condu::lyser is a maintenance-free and long-term stable
probe for online measurement of conductivity, automatically compensated with
temperature. It can be mounted directly in the media or in a flow cell
providing high precision by either conductive or inductive measurement.
Thanks to the high measurement range it is ideal for… |
The redo::lyser is a long-term stable and maintenance free
sensor for the online measurement of the redox potential immersed in the
medium or in a flow cell. Thanks to a groundbreaking reference electrode,
high precision is guaranteed in virtually any medium and under harshest
conditions. It is pre-calibrated ex works… |
The pH::lyser is a
maintenance-free sensor for the real-time measurement of pH and temperature
directly in the medium or in a flow-cell. Even under tough conditions (up to
90°C) or in water with very low conductivity long term stability and precise
measurement is ensured. The sensor is pre-calibrated ex works… |
|
|
|
|
The fluor::lyser is an ion-selective measuring device
designed for the continuous monitoring of the concentration of fluor (F)
dissolved in water. Also the instrument continuously measures the temperature
of the medium and corrects the measured concentration accordingly. For proper
usage the probe has to be connected to an s::can controller,… |
The soli::lyser is an optical probe that measures
concentrations of suspended solids directly in the water. It integrates the
temperature measurement for online correction. Using the principle of
infrared absorbance, the readings are not affected by colors. The soli::lyser
utilizes an automatic cleaning system that uses compressed air for removal… |
The oxi::lyser
is an optical multi-parameter probe that measures the concentration of
dissolved oxygen and the temperature directly in the water. It does not need
a minimum flow to produce accurate readings and integrates the temperature
measurement for On-Line correction. Minimal conventional calibration and
virtually zero maintenance. oxi::lyser™… |
Terminals & Software
With the con::cube, s::can
has in fact established a standard for industrial process control terminals.
Via a large color display and a touch panel it allows menu-driven,
user-friendly communication with all s::can sensors and basically any other
digital (RS485) or 4-20 mA sensor of different make, as well as the operation
of distributed systems, either via telephone, radio, GSM, or GPRS telemetry: all
available in one terminal.
More about our terminals & software
With the con::cube, s::can
has established a standard for industrial process control terminals. Via a
large color display and a touch panel it allows menu-driven, user-friendly
communication with all s::can sensors and basically any other digital (RS485)
or 4-20 mA sensor of different make, as well as the operation of distributed
systems, either via telephone, radio, GSM, or GPRS telemetry: all available in
one terminal.
Bediengeräte & Software
|
|
|
|
con::cube – a compact, versatile terminal for data
acquisition and station control. Newest processor technology and very
flexible options for interfacing to SCADA or any central database systems
makes the con::cube in combination with moni::tool a powerful terminal for
compact station control. s::can high-end IoT (Internet of Things) terminal… |
moni::tool is a revolutionary new
platform for the management of an almost unlimited number of stations, online
probes, analyzers and parameters. Intuitive operation – on site or remote –
and reams of valuable features make moni::tool essential for state of the art
sensor and station management. |
vali::tool automatically detects,
marks and (optionally) corrects untrustworthy data, it detects outliers,
noise and checks for discontinuous data. It ensures only high quality data
are fed into the event detection module. It also provides the user with
indications on sensor maintenance requirements, as well as automatic
detection of malfunctions. Provides… |
|
|
|
|
ana::tool identifies unknown and unusual conditions and
enables operators to react in a timely manner to faults in the monitored
system, determines normality of this data and triggers an alarm when a
significant deviation from the norm is detected Start ana::tool is
installed with application-specific default settings ana::tool requires… |
The terminal con::lyte displays the readings of all s::can
probes & sensors connected on site via backlight LCD. Seven push buttons
are available to ensure operation and changing of settings via software,
which is optimised in respect of user-friendly operation and operational
safety. s::can low-cost terminal designed for control applications… |
Intuitive web
interface for data visualization and configuration of the spectro::lyser V3.
View all your data at a glance on your mobile device Io::Tool visualizes
measurement data, time series, fingerprints and status information Configure
your spectro::lyser, install new parameters, and perform calibrations Try
Io::Tool online!… |
|
|
|
|
visu::tool is a fast and easy-to-use data visualization
software for PCs and notebooks. In 3 simple steps you can visualize huge
amounts of data from con::cube or con::lyte into single or multiple graphs.
The visu::tool “lyte” version is available for free download. The advanced
visu::tool “pro” version includes a vast… |
Power supply for the spectro::lyser V3. Connect to the
spectro::lyser via Bluetooth or WLAN and use the user-friendly webinterface
Io::Tool for probe configuration and data visualization. s::can connection
device for one spectrometer V3 probe and one cleaning device expand
con::cube/con::lyte sensors networks (longer distances and higher number of… |
For operating the spectro::lyser™, an commercial
computer/notebook can be used. In this case the interface box con::nect
connects the probe to the computer/notebook, to the supply of compressed air
and to the power supply. This way, your computer/notebook is transformed into
a terminal for the spectro::lyser™. s::can power… |
pipe::scan
The pipe::scan is a
modular sensor system for monitoring drinking water quality in pipes under
pressure. It measures up to 10 parameters in one device: TOC, DOC, UV254,
Turbidity, Color, Chlorine, pH/Redox, Conductivity, Temperature and also
Pressure. The water quality data can be sent to basically any central database
via almost any protocol. Multiple pipe::scans are certainly the ideal solution
to monitor drinking water at any point in the network.
More
about the pipe::scan
pipe::scan
Drinking water quality monitoring in the
network
The pipe::scan is a modular sensor system
for monitoring drinking water quality in pipes under pressure. It measures up
to 10 parameters in one device: TOC, DOC, UV254, Turbidity, Color, Chlorine,
pH/Redox, Conductivity, Temperature and Pressure. The water quality data can be
sent to any central database via almost any protocol. Multiple pipe::scans are
the ideal solution to monitor drinking water at any point in the network.
- Accurate
measurement in perfect agreement to standardized lab reference… not just
”trending”
- Organics
and Turbidity monitoring
- Totally
flow-independent, even works under stagnating conditions
- Hot-maintenance:
without interrupting the flow/pressure, and for each sensor individually
- Full-scale event detection with real-time alarms within the
drinking water distribution network
- 6 months service time: Efficient, reliable stand-alone
operation without maintenance
Datasheet Drinking Waterpipe::scan Brochure
pipe::scan
Monitoring Stations
The fully modular s::can
monitoring stations combine s::can instruments to a compact and versatile
system. They present a complete solution, so the user only has to connect water
supply and -discharge (“plug & measure”) in order to receive at no extra
cost a previously unheard variety of immediately available information and
parameters.
More about the micro::station
The fully modular s::can
monitoring stations combine s::can instruments to a compact and versatile
system. They present a complete solution, as the user only has to connect water
supply and -discharge (“plug & measure”) in order to receive at no extra
cost a previously unheard variety of immediately available information and
parameters.
Stationen
|
|
|
|
The s::can drinking water micro::station is designed for
online monitoring of water quality parameters in clean media. The required
components – spectro::lyser, s::can probes and controller – are factory
assembled with all required flow cells, mounting fittings and pipework on a
compact panel. The fully modular micro::station combines s::can instruments… |
The s::can micro::station for
waste water is designed for online monitoring of water quality parameters in
waste water. The required components – spectro::lyser, s::can probes and
controller – are factory assembled with all required flow cells, mounting
fittings and pipes on a compact panel. The fully modular micro::station
combines s::can… |
The fully modular nano::station combines s::can instruments
to a super-compact and versatile system. It presents a complete solution, as
the user only has to connect water supply and -discharge in order to receive
at no extra cost a previously unheard variety of immediately available
information and parameters. The s::can nano::station… |
Accessories
Our automatic cleaning
systems keep your probes and sensors clean and therefore minimizing regular
maintenance. Our accessories also include flow fittings for drinking and waste
water, brackets, extension cables and various spare parts.
More about the accessories
|
|
|
auto::blade
Mechanical
Cleaning for spectrometer probes with path length 5 mm Mounting on F-48-V3
wastewater flow cell Exchangeable wiper blades Set of cleaning and valve unit
Technical Specification Power Supply: 12 VDC Power consumption (typical): 200
mA Cable length: 1,5 m Tube length: 1,5 m Housing… |
i::scan carrier
for easy attachment of one i::scan technical
specification housing material: PVC, POM-C dimensions (diameter x
lenght): 58 x 115 (without connection fitting) installation / mounting:
submersed part numbers F-110-iscan: carrier for i::scan, for easy
horizontal attachment F-120-iscan: carrier for i::scan, for easy vertical… |
Submersible
Autobrush for spectrometer probes and i::scan Exchangeble brushes for
spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm One
Basis module (motor unit) for all Versions Shelter protects the brush from
clogging Technical Specification Power supply: 12 VDC Power
consumption… |
|
|
|
auto::blade
Mechanical
Cleaning for spectrometer probes with path length 5 mm Mounting on F-48-V3
wastewater flow cell Exchangeable wiper blades Set of cleaning and valve unit
Technical Specification Power Supply: 12 VDC Power consumption (typical): 200
mA Cable length: 1,5 m Tube length: 1,5 m Housing… |
i::scan carrier
for easy attachment of one i::scan technical
specification housing material: PVC, POM-C dimensions (diameter x
lenght): 58 x 115 (without connection fitting) installation / mounting:
submersed part numbers F-110-iscan: carrier for i::scan, for easy
horizontal attachment F-120-iscan: carrier for i::scan, for easy vertical… |
Submersible
Autobrush for spectrometer probes and i::scan Exchangeble brushes for
spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm One
Basis module (motor unit) for all Versions Shelter protects the brush from
clogging Technical Specification Power supply: 12 VDC Power
consumption… |
|
|
|
|
For proper and easy installation of s::can sensors
(pH::lyser, redo::lyser or condu::lyser) in waste water technical
specification housing material: PVC dimensions : 177 x 95 x 111 mm Part
Number: F-48-sensor… |
for proper and easy flow-through
installation of one i::scan automatic cleaning with autobrush for i::scan
available (optional) technical specification housing material: POM-C
dimensions (diameter x length): 70 x 86 process connection: G 1/4″, hose
nozzle 7mm installation / mounting: flow cell operating temperature:… |
for proper and easy flow-through installation of s::can
spectrometer probes for applications without automatic cleaning OPL 100 mm
technical specification housing material: POM-C dimensions (diameter x
length): 60 x 160 mm weight (min.): 300 g process connection: G 1/4”, hose
nozzle 7mm installation /… |
|
|
|
|
For proper and easy installation of s::can sensors
(pH::lyser, redo::lyser or condu::lyser) in waste water technical
specification housing material: PVC dimensions : 177 x 95 x 111 mm Part
Number: F-48-sensor… |
for proper and easy flow-through
installation of one i::scan automatic cleaning with autobrush for i::scan
available (optional) technical specification housing material: POM-C
dimensions (diameter x length): 70 x 86 process connection: G 1/4″, hose
nozzle 7mm installation / mounting: flow cell operating temperature:… |
for proper and easy flow-through installation of s::can
spectrometer probes for applications without automatic cleaning OPL 100 mm
technical specification housing material: POM-C dimensions (diameter x
length): 60 x 160 mm weight (min.): 300 g process connection: G 1/4”, hose
nozzle 7mm installation /… |
|
|
|
|
provides compressed air for s::can spectrometer probes,
oxi::lyser, soli::lyser and ammo::lyser™ removal of fouling using compressed
air aluminium housing IP65 for wall mounting optional 12 VDC or 110 VAC
version available railing-mounting set available technical
specification power supply:… |
for proper and easy installation
of one i::scan in a pressure pipe under pressure drilling of pipes possible
(for PE, PVC, DCI, steel and AC pipes) the i::scan can be mounted and
demounted under pressure without interuption of the water flow technical
specification housing… |
supports automatic cleaning of measuring elements of s::can
spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™ removal of
fouling, sediments and clogging using compressed air or water version B-44-2
specially for use in comination with the s::can compressor technical
specification cable length: 2.4… |
|
|
|
|
simple and proper supply of compressed air for cleaning
compatible with certain s::can flow cell fittings technical specification
cable length: 3 m assembling: ex works housing material: jacket PU,
connection nozzle in nickel-plated brass (for spectrometer probes: fitting PP)
process connection:… |
for proper and easy flow-through
installation of one i::scan in waste water application technical
specifications housing material: PVC dimensions (lenght x width x
height): 177 x 83 x 90 mm process connection: 1″ inside thread installation /
mounting: flow cell recommended flow: <… |
for proper and easy flow-through installation of s::can
spectrometer probes for applications with frequent, automatic cleaning
cleaning of optical windows with rotating brush without demounting of
spectrometer probes OPL 100 mm technical specification power supply:
12 VDC assembling: ex works… |
|
|
|
|
supports the proper and easy installation of s::can systems
quick mounting and demounting of InSitu installed s::can probes and sensors
technical specification housing material: stainless steel weight
(min.): 2.6 kg process connection: ID 50 mm part number: F-15 recommended
accessories F-14-3 mounting… |
supports quick, easy and proper
cleaning of optical windows of s::can spectrometer probes mechanical removal
of persistent window fouling for pathlength 2, 5 or 15 mm technical
specification dimensions (diameter x length): length 200 mm weight (min.): 1 g
part number: B-60-1 for 2… |
for proper and easy flow-through installation of s::can
spectrometer probes for applications with frequent, automatic cleaning
cleaning of optical windows with rotating brush without demounting of
spectrometer probe OPL 35 mm technical specification power supply: 12
VDC assembling: ex works housing material: POM-C… |
|
|
|
|
supports quick, easy and proper cleaning of optical windows
of s::can spectrometer probes chemical removal of persistent window fouling
very effective for grease and organic fouling technical specification
weight (min.): 1.3 kg part number: B-61-1… |
stand-alone operation of s::can spectrometer probes no
on-site power supply necessary for remote monitoring tasks without
infrastructure technical specification power supply: 12 VDC nominal
assembling: ex works housing material: PP dimensions (width x height x
depth): 270 x 175 x 245 mm… |
optional 2 m power cable for s::can terminals
technical specification cable length: 2 m assembling: ex works housing
material: jacket: PU process connection: CEE-7 shockproof plug protection
class: IP 44 sales region: Europe part number: C-31-eu… |
|
|
|
|
for protection against severe weather conditions
transparent cover plate available (optional) mounting prepared for con::cube
or con::lyte for mounting on walls or railings incl. mounting device for
diameter 40-63mm technical specification housing material: stainless steel
dimensions (width x height… |
for proper and easy flow-through
installation of condu::lyser, chlori::lyser, redo::lyser and pH::lyser for
applications without automatic cleaning in drinking water technical
specification housing material: POM-C dimensions (diameter x length): 106 x
103 weight (min.): 1.05 kg process connection: G 1/4″, hose nozzle 7mm… |
for proper and easy submersed installation of an s::can
sensor sensor cable and pressure hose compatible mounting with pipe (AD 50
mm) technical specification housing material: PVC and stainless steel
dimensions (diameter x length): 85 x 86 mm weight (min.): 300 g… |
|
|
|
|
for proper and easy flow-through installation of one
i::scan and up to three s::scan physical probes automatic cleaning with
autobrush for i::scan available (optional) technical specification
housing material: POM-C dimensions (diameter x length): 106 x 103 weight
(min.): 1 kg (without autobrush) process… |
extension of sensor cable IP 68
plug connection flexible adjustment to local conditions
technical specification cable length: 10, 20 or 30 m assembling: ex
works housing material: jacket: PU protection class: IP 68 interface
connection to s::can sensors:… |
for proper and easy flow-through
installation of one spectrometer probe in waste water applications
technical specifications housing material: PVC dimensions (lenght x width x
height): 177 x 83 x 90 mm process connection: 1″ inside thread installation /
mounting: flow cell recomended flow:… |
|
|
|
|
long life time (typically 3 years) non-porous, solid state
electrode smaller drift than conventional electrodes technical
specification dimensions (diameter x length): 20 x 145 mm weight (min.): 100 g
protection class: IP 68 (mounted in housing) part number: E-532-ise-ref (for
ammo::lyser V1, spare… |
technical specification dimensions
(diameter x length): 20 x 145 mm weight (min.): 100 g protection class: IP 68
(mounted in housing) part number: E-532-ise-K (for amm::lyser V1, spare part)
E-533-ise-K (for ammo::lyser V2, spare part)… |
technical specification part number: E-532-ise-pH (for
ammo::lyser V1, spare part new) E-533-ise-pH (for ammo::lyser V2, spare part
new)… |
|
|
|
|
for proper and easy flow-through installation of
ammo::lyser in wastewater technical specification housing material: PVC
dimensions : 177 x 83 x 108 mm part Number: F-48-ammo… |
technical specification dimensions
(diameter x length): 20 x 145 mm weight (min.): 100 g protection class: IP 68
(mounted in housing) part number: E-534-ise-NH4 (for ammo::lyser V1, spare
part) E-535-ise-NH4 (for ammo::lyser V2, spare part)… |
for adaption or repair the
optical path length of s::can spectrometer probes stainless steel (ISO
1.4404), suitable for 35/5/2/1/0,5 mm OPL incl. sealings, saphire measurment
windows and service tools expert service by s::can Salespartner required; for
permanent application! part numbers A-500-s (for
optical pathlength 0.5… |
|
|
|
|
for proper and easy flow-through installation of s::can
spectrometer probes for applications without automatic cleaning OPL 0.5 … 35
mm technical specification housing material: POM-C dimensions
(diameter x length): 74 x 132 mm weight (min.): 450 g process connection: G
1/2”, hose nozzle 12mm… |
for referencing of spectrometer
probes for pathlength 0.5 – 35 mm for spectral measurement in laboratory
technical specification dimensions (diameter x length): 60 x 100 mm
(outside) installation / mounting: for 0.5 mm to 35 mm part number: E-421-1… |
for referencing of spectrometer
probes for pathlength 100 mm for spectral measurement in laboratory
technical specification dimensions (diameter x length): 60 x 160 mm (outside)
installation / mounting: for 100 mm part number: E-421-2… |
|
|
|
|
for proper and easy submersed installation of s::can
spectrometer probes probe cable and pressure hose compatible mounting
with pipe (AD 50 mm) technical specification housing material: PVC and
POM-C dimensions (diameter x length): 63 x 403 (for F-110-spectro); 63 x 510
mm (for F-120-spectro)… |
for proper and easy flow-through
installation of s::can spectrometer probes for applications without automatic
cleaning OPL 100 mm technical specification housing material: POM-C
dimensions (diameter x length): 74 x 196 mm weight (min.): 800 g process
connection: G 1/2”, hose nozzle 12mm installation /… |
extension of probe cable IP 67 plug connection flexible
adjustment to local conditions technical specification cable length:
10, 20 or 30 m assembling: ex works housing material: jacket: PU
protection class: IP 67 interface connection to s::can spectrometric probes:
MIL 10P, IP 67,… |
